Re: [PATCH] media: vsp1: mask interrupts before enabling

[Nikita Yushchenko]

Hi,

> Could you test to see if those lines to explicitly set VI6_DISP_IRQ_ENB
> and VI6_WPF_IRQ_ENB are really needed in your use case please?

Commenting out those register writes causes

[    2.275137][    C0] irq 188: nobody cared (try booting with the "irqpoll" option)
[    2.282621][    C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc5 #28
[    2.289669][    C0] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
[    2.297844][    C0] Call trace:
[    2.300981][    C0]  dump_backtrace+0x0/0x198
[    2.305348][    C0]  show_stack+0x1c/0x28
[    2.309357][    C0]  dump_stack_lvl+0x64/0x7c
[    2.313718][    C0]  dump_stack+0x14/0x2c
[    2.317725][    C0]  __report_bad_irq+0x50/0xdc
[    2.322254][    C0]  note_interrupt+0x2e4/0x330
[    2.326786][    C0]  handle_irq_event_percpu+0x58/0x68
[    2.331927][    C0]  handle_irq_event+0x4c/0x98
[    2.336456][    C0]  handle_fasteoi_irq+0xd0/0x180
[    2.341245][    C0]  handle_domain_irq+0x94/0xd8
[    2.345862][    C0]  gic_handle_irq+0xa4/0xe0
[    2.350216][    C0]  do_interrupt_handler+0x38/0x60
[    2.355093][    C0]  el1_interrupt+0x2c/0x68
[    2.359362][    C0]  el1h_64_irq_handler+0x14/0x20
[    2.364151][    C0]  el1h_64_irq+0x74/0x78
[    2.368244][    C0]  __do_softirq+0xc8/0x404
[    2.372511][    C0]  irq_exit+0x118/0x140
[    2.376521][    C0]  handle_domain_irq+0x98/0xd8
[    2.381137][    C0]  gic_handle_irq+0xa4/0xe0
[    2.385490][    C0]  call_on_irq_stack+0x28/0x3c
[    2.390105][    C0]  do_interrupt_handler+0x54/0x60
[    2.394981][    C0]  el1_interrupt+0x2c/0x68
[    2.399247][    C0]  el1h_64_irq_handler+0x14/0x20
[    2.404036][    C0]  el1h_64_irq+0x74/0x78
[    2.408129][    C0]  _raw_spin_unlock_irqrestore+0x20/0x50
[    2.413615][    C0]  __setup_irq+0x56c/0x888
[    2.417882][    C0]  request_threaded_irq+0xf0/0x1a8
[    2.422843][    C0]  devm_request_threaded_irq+0x84/0xf8
[    2.428155][    C0]  vsp1_probe+0x218/0xb48
[    2.432340][    C0]  platform_probe+0x6c/0xd8
[    2.436700][    C0]  really_probe+0xc0/0x428
[    2.440967][    C0]  __driver_probe_device+0x114/0x188
[    2.446103][    C0]  driver_probe_device+0x44/0xe8
[    2.450891][    C0]  __driver_attach+0xbc/0x1a0
[    2.455419][    C0]  bus_for_each_dev+0x64/0xa0
[    2.459947][    C0]  driver_attach+0x28/0x30
[    2.464215][    C0]  bus_add_driver+0x144/0x228
[    2.468743][    C0]  driver_register+0x68/0x118
[    2.473272][    C0]  __platform_driver_register+0x2c/0x38
[    2.478669][    C0]  vsp1_platform_driver_init+0x20/0x28
[    2.483985][    C0]  do_one_initcall+0x38/0x258
[    2.488513][    C0]  kernel_init_freeable+0x228/0x28c
[    2.493565][    C0]  kernel_init+0x28/0x120
[    2.497745][    C0]  ret_from_fork+0x10/0x20
[    2.502013][    C0] handlers:
[    2.504974][    C0] [<0000000040be598b>] vsp1_irq_handler
[    2.510376][    C0] Disabling IRQ #188

Nikita