Re: [PATCH] iio: chemical: scd4x: Add a scale for the co2 concentration reading

[Jonathan Cameron]

On Thu, 21 Oct 2021 16:00:18 +0200
Roan van Dijk <roan@xxxxxxxxxxx> wrote:

> This patch adds a scale for the co2 concentration reading. The reading is
> expressed in percent after applying the scale to the raw value.
> 
> Signed-off-by: Roan van Dijk <roan@xxxxxxxxxxx>
Thanks,

Applied to the togreg branch of iio.git and for once pushed out directly
as I want to get this into linux-next tomorrow and a pull request out if
no problems show up.

Thanks,

Jonathan
> ---
>  drivers/iio/chemical/scd4x.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c
> index 09b34201c42b..b063b378c7d5 100644
> --- a/drivers/iio/chemical/scd4x.c
> +++ b/drivers/iio/chemical/scd4x.c
> @@ -352,7 +352,11 @@ static int scd4x_read_raw(struct iio_dev *indio_dev,
>  		*val = ret;
>  		return IIO_VAL_INT;
>  	case IIO_CHAN_INFO_SCALE:
> -		if (chan->type == IIO_TEMP) {
> +		if (chan->type == IIO_CONCENTRATION) {
> +			*val = 0;
> +			*val2 = 100;
> +			return IIO_VAL_INT_PLUS_MICRO;
> +		} else if (chan->type == IIO_TEMP) {
>  			*val = 175000;
>  			*val2 = 65536;
>  			return IIO_VAL_FRACTIONAL;
> @@ -501,7 +505,8 @@ static const struct iio_chan_spec scd4x_channels[] = {
>  		.type = IIO_CONCENTRATION,
>  		.channel2 = IIO_MOD_CO2,
>  		.modified = 1,
> -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +					BIT(IIO_CHAN_INFO_SCALE),
>  		.address = SCD4X_CO2,
>  		.scan_index = SCD4X_CO2,
>  		.scan_type = {