Re: [PATCH v3 0/6] PWM support for allwinner sun8i R40/T3/V40 SOCs.

From: Hao Zhang
Date: Thu Oct 28 2021 - 02:44:28 EST


Never mind, you can continue it.

Icenowy Zheng <icenowy@xxxxxxx> 于2021年7月22日周四 上午9:03写道:
>
> Hao,
>
> Would you mind me to continue on this work? Newer Allwinner SoCs have
> PWM controllers similar to the R40 one.
>
> Yours sincerely,
> Icenowy Zheng
>
>
> 在 2018-11-26星期一的 00:18 +0800,Hao Zhang写道:
> > PWM support for allwinner sun8i R40/T3/V40 SOCs.
> >
> > The sun8i R40/T3/V40 PWM has 8 PWM channals and divides to 4 PWM
> > pairs,
> > each PWM pair built-in 1 clock module, 2 timer logic module and 1
> > programmable dead-time generator, it also support waveform capture.
> > It has 2 clock sources OSC24M and APB1, it is different with the
> > sun4i-pwm driver, Therefore add a new driver for it.
> >
> > Some test method:
> > cd /sys/class/pwm/pwmchip0
> > echo 0 > export
> > cd pwm0
> > echo 1000 > period
> > echo 500 > duty_cycle
> > echo 1 > enable
> > then check the PB2 pin with oscilloscope.
> >
> > v3 Changes:
> > 1. fix coding format.
> > 2. use 2/ilog2 instead of divide table
> > 3. remove spinlock.
> > 4. remove sun8i_pwm_data structure and use DT to parse pwm-channals
> > 5. remove inline because complier knows it better.
> > 6. don't hardcode clock source and parse two clock source from dt
> > "mux-0"
> > and "mux-1"
> > 7. remove bypass method.
> > 8. add a method to change clock source when mux-0 is not support the
> > input period it can change to mux-1.
> > 9. add cycle range check.
> > 10. add some variable to make it more readability.
> > 11. add clk_disable_unprepare when some false accur.
> >
> > v2 Changes:
> > 1. change sun8i-r40 symbol to sun8i.
> > 2. change pwm0_pin, pwm0-pin to pwm_ch0_pin, pwm-ch0-pin.
> > 3. remove clk_disable_unprepare(), check !match and IS_ERR(pwm-
> > >regmap).
> >
> > Hao Zhang (6):
> > Documentation: ARM: sunxi: pwm: add Allwinner sun8i.
> > ARM: dtsi: add pwm node for sun8i R40.
> > ARM: dts: add PWM for Bananapi M2 Ultrar board.
> > DEV: CLK: add function to check the using clock name of driver.
> > DEV: CLK: sunxi ccu: export clk_apb1 for sun8i-r40 soc pwm.
> > ARM: PWM: add allwinner sun8i R40/T3/V40 PWM support.
> >
> > .../devicetree/bindings/pwm/pwm-sun8i.txt | 24 ++
> > arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 +
> > arch/arm/boot/dts/sun8i-r40.dtsi | 17 +
> > drivers/clk/clk.c | 6 +
> > drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 4 +-
> > drivers/pwm/Kconfig | 12 +-
> > drivers/pwm/Makefile | 1 +
> > drivers/pwm/pwm-sun8i.c | 418
> > +++++++++++++++++++++
> > include/dt-bindings/clock/sun8i-r40-ccu.h | 2 +
> > include/linux/clk-provider.h | 1 +
> > 10 files changed, 489 insertions(+), 2 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-
> > sun8i.txt
> > create mode 100644 drivers/pwm/pwm-sun8i.c
> >
>