Re: [PATCH stable 4.19 1/1] arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

[Greg KH]

On Wed, Nov 03, 2021 at 01:56:56PM -0700, Florian Fainelli wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
> 
> [ Upstream commit cef397038167ac15d085914493d6c86385773709 ]
> 
> Stefan Agner reported a bug when using zsram on 32-bit Arm machines
> with RAM above the 4GB address boundary:
> 
>   Unable to handle kernel NULL pointer dereference at virtual address 00000000
>   pgd = a27bd01c
>   [00000000] *pgd=236a0003, *pmd=1ffa64003
>   Internal error: Oops: 207 [#1] SMP ARM
>   Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
>   CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
>   Hardware name: BCM2711
>   PC is at zs_map_object+0x94/0x338
>   LR is at zram_bvec_rw.constprop.0+0x330/0xa64
>   pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
>   sp : e376bbe0  ip : 00000000  fp : c1e2921c
>   r10: 00000002  r9 : c1dda730  r8 : 00000000
>   r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
>   r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
>   Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
>   Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
>   Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
>   Stack: (0xe376bbe0 to 0xe376c000)
> 
> As it turns out, zsram needs to know the maximum memory size, which
> is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
> MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
> 
> The same problem will be hit on all 32-bit architectures that have a
> physical address space larger than 4GB and happen to not enable sparsemem
> and include asm/sparsemem.h from asm/pgtable.h.
> 
> After the initial discussion, I suggested just always defining
> MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
> set, or provoking a build error otherwise. This addresses all
> configurations that can currently have this runtime bug, but
> leaves all other configurations unchanged.
> 
> I looked up the possible number of bits in source code and
> datasheets, here is what I found:
> 
>  - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
>  - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
>    support more than 32 bits, even though supersections in theory allow
>    up to 40 bits as well.
>  - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
>    XPA supports up to 60 bits in theory, but 40 bits are more than
>    anyone will ever ship
>  - On PowerPC, there are three different implementations of 36 bit
>    addressing, but 32-bit is used without CONFIG_PTE_64BIT
>  - On RISC-V, the normal page table format can support 34 bit
>    addressing. There is no highmem support on RISC-V, so anything
>    above 2GB is unused, but it might be useful to eventually support
>    CONFIG_ZRAM for high pages.
> 
> Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
> Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
> Acked-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> Reviewed-by: Stefan Agner <stefan@xxxxxxxx>
> Tested-by: Stefan Agner <stefan@xxxxxxxx>
> Acked-by: Mike Rapoport <rppt@xxxxxxxxxxxxx>
> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@xxxxxxxx/
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> [florian: patch arch/powerpc/include/asm/pte-common.h for 4.19.y]
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

All now queued up, thanks.

greg k-h