Re: [PATCH v5 0/8] Add the imx8m pcie phy driver and imx8mm pcie support
From: Tim Harvey
Date: Wed Nov 17 2021 - 13:03:00 EST
On Tue, Nov 16, 2021 at 7:38 PM Hongxing Zhu <hongxing.zhu@xxxxxxx> wrote:
>
> <snipped...>
> > > Subject: Re: [PATCH v5 0/8] Add the imx8m pcie phy driver and imx8mm
> > > pcie support
> > >
> > > On Mon, Nov 1, 2021 at 7:58 PM Richard Zhu <hongxing.zhu@xxxxxxx>
> > > wrote:
> > > >
> > > > Refer to the discussion [1] when try to enable i.MX8MM PCIe support,
> > > > one standalone PCIe PHY driver should be seperated from i.MX PCIe
> > > > driver when enable i.MX8MM PCIe support.
> > > >
> > > > This patch-set adds the standalone PCIe PHY driver suport[1-5], and
> > > > i.MX8MM PCIe support[6-8] to have whole view to review this
> > > patch-set.
> > > >
> > > > The PCIe works on i.MX8MM EVK board based the the blkctrl power
> > > driver
> > > > [2] and this patch-set. And tested by Tim and Marcel on the
> > > > different reference clock modes boards.
> > > >
> > > > [1]
> > > >
> > >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpa
> > > tc
> > > >
> > >
> > hwork.ozlabs.org%2Fproject%2Flinux-pci%2Fpatch%2F20210510141509.
> > > 929120
> > > >
> > >
> > -3-l.stach%40pengutronix.de%2F&data=04%7C01%7Chongxing.zhu
> > > %40nxp.c
> > > >
> > >
> > om%7C489971db9c0f4308600208d9a88b2b05%7C686ea1d3bc2b4c6fa9
> > > 2cd99c5c3016
> > > >
> > >
> > 35%7C0%7C0%7C637726137953234928%7CUnknown%7CTWFpbGZsb3d
> > > 8eyJWIjoiMC4wLj
> > > >
> > >
> > AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&
> > > amp;sdata=
> > > >
> > >
> > ltuNZqIAsEH6%2B1KE4cqNOiUul3Ex%2BWmYcyqD%2BFJuUrs%3D&
> > > reserved=0
> > > > [2]
> > > >
> > >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpa
> > > tc
> > > >
> > >
> > hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F20210910
> > > 202640
> > > > .980366-1-l.stach%40pengutronix.de%2F&data=04%7C01%7Ch
> > on
> > > gxing.zhu%
> > > >
> > >
> > 40nxp.com%7C489971db9c0f4308600208d9a88b2b05%7C686ea1d3bc2
> > > b4c6fa92cd99
> > > >
> > >
> > c5c301635%7C0%7C0%7C637726137953234928%7CUnknown%7CTWFp
> > > bGZsb3d8eyJWIjo
> > > >
> > >
> > iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%
> > > 7C3000&
> > > > ;sdata=MrT3Re3YttE9AoqmGHksTqt4jF4vitRPz5lkgpZqSZ4%3D&r
> > es
> > > erved=0
> > > >
> > > > Main changes v4 --> v5:
> > > > - Set the AUX_EN always 1b'1, thus it can fix the regression
> > > > introduced
> > > in v4
> > > > series on Marcel's board.
> > > > - Use the lower-case letter in the devicetreee refer to Marcel's
> > > comments.
> > > > - Since the default value of the deemphasis parameters are zero,
> > > > only
> > > set
> > > > the deemphasis registers when the input paramters are none zero.
> > > >
> > > > Main changes v3 --> v4:
> > > > - Update the yaml to fix syntax error, add maxitems and drop
> > > > description of phy
> > > > - Correct the clock name in PHY DT node.
> > > > - Squash the EVK board relalted dts changes into one patch, and drop
> > > the
> > > > useless dummy clock and gpio suffix in DT nodes.
> > > > - Add board specific de-emphasis parameters as DT properties. Thus
> > > each board
> > > > can specify its actual de-emphasis values.
> > > > - Update the commit log of PHY driver.
> > > > - Remove the useless codes from PCIe driver, since they are moved to
> > > > PHY driver
> > > > - After the discussion and verification of the CLKREQ#
> > > > configurations
> > > with Tim,
> > > > agree to add an optional boolean property
> > > > "fsl,clkreq-unsupported",
> > > indicates
> > > > the CLKREQ# signal is hooked or not in HW designs.
> > > > - Add "Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>"
> > > > tag,
> > > since
> > > > Marcel help to test the v3 patch-set.
> > > >
> > > > Main changes v2 --> v3:
> > > > - Regarding Lucas' comments.
> > > > - to have a whole view to review the patches, send out the
> > i.MX8MM
> > > PCIe support too.
> > > > - move the PHY related bits manipulations of the GPR/SRC to
> > > standalone PHY driver.
> > > > - split the dts changes to SOC and board DT, and use the enum
> > > > instead
> > > of raw value.
> > > > - update the license of the dt-binding header file.
> > > >
> > > > Changes v1 --> v2:
> > > > - Update the license of the dt-binding header file to make the license
> > > > compatible with dts files.
> > > > - Fix the dt_binding_check errors.
> > > >
> > > > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml |
> > 6
> > > +++
> > > > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml |
> > 95
> > > ++++++++++++++++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > |
> > > 55 +++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > |
> > > 46 +++++++++++++++-
> > > > drivers/pci/controller/dwc/pci-imx6.c |
> > > 73 ++++++++++++++++++++++---
> > > > drivers/phy/freescale/Kconfig
> > |
> > > 9 ++++
> > > > drivers/phy/freescale/Makefile
> > |
> > > 1 +
> > > > drivers/phy/freescale/phy-fsl-imx8m-pcie.c |
> > > 237
> > >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > +++++++++++++++++++++
> > > > include/dt-bindings/phy/phy-imx8-pcie.h |
> > > 14 +++++
> > > > 9 files changed, 528 insertions(+), 8 deletions(-)
> > > >
> > > > [PATCH v5 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the
> > > > [PATCH v5 2/8] dt-bindings: phy: Add imx8 pcie phy driver support
> > > > [PATCH v5 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name
> > > > [PATCH v5 4/8] arm64: dts: imx8mm: Add the pcie phy support
> > [PATCH
> > > v5
> > > > 5/8] phy: freescale: pcie: Initialize the imx8 pcie [PATCH v5 6/8]
> > > > arm64: dts: imx8mm: Add the pcie support [PATCH v5 7/8] arm64:
> > dts:
> > > > imx8mm-evk: Add the pcie support on imx8mm [PATCH v5 8/8] PCI:
> > > imx:
> > > > Add the imx8mm pcie support
> > >
> > > Richard,
> > >
> > > Are you posting a v6 of this series or have we already missed the
> > > window for 5.16?
> > [Richard Zhu] Hi Tim:
> > Thanks for your kindly reminder.
> > In my original plan, I prefer to merge the codes refine firstly, then issue
> > the v6 patch-set after the rebase.
> > https://patchwork.kernel.org/project/linux-arm-kernel/cover/163574747
> > 8-25562-1-git-send-email-hongxing.zhu@xxxxxxx/
> > Unfortunately, I don't get ack from Lucas for other four patches.
> > Anyway, I would post the v6 patch-set immediately after merge Rob's
> > comments.
> >
> > Best Regards
> > Richard Zhu
> > >
> > > Best regards,
> > >
> [Richard Zhu] Hi Tim:
> The V6 patch-set listed below had been issued.
> " https://patchwork.kernel.org/project/linux-phy/cover/1637028976-9201-1-git-send-email-hongxing.zhu@xxxxxxx/";
> GENERIC PHY FRAMEWORK maintainer Kishon and Vinod had been contained in the
> mail-loop.
> Do you know who I can ping to pick up the PHY part of this patch-set?
>
Richard,
Thanks for posting the v6 series. Hopefully you can get Rob's ACK on
the last dt-binding patch. I'm not sure who would pick up patches in
drivers/phy - I don't see a maintainer for that dir. Perhaps Lucas
knows?
I noticed you did not send your v5 or v6 patchset to
linux-pci@xxxxxxxxxxxxxxx so its missing from
https://patchwork.kernel.org/project/linux-pci/list/ and maybe that's
why you haven't gotten ack's yet?
Best regards,
Tim
Tim