Re: [PATCH 4/4] mtd: nand: omap2: Add support for NAND Controller on AM64 SoC

[Miquel Raynal]

Hi Roger,

rogerq@xxxxxxxxxx wrote on Tue, 23 Nov 2021 12:36:09 +0200:

> AM64 SoC has an issue which prevents proper 8-bit and 16-bit
> reads from GPMC. We are limited to do 32-bit reads only.

First, thanks for this series!

> Force 32-bit only reads on affected platforms.
> 

Please change the commit title prefix to: "mtd: rawnand: omap2:" in
patch 2, 3, 4.
 
> Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
> ---
>  drivers/mtd/nand/raw/omap2.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
> index f1fc146e09b9..d952de771b35 100644
> --- a/drivers/mtd/nand/raw/omap2.c
> +++ b/drivers/mtd/nand/raw/omap2.c
> @@ -28,6 +28,7 @@
>  
>  #include <linux/omap-gpmc.h>
>  #include <linux/platform_data/mtd-nand-omap2.h>
> +#include <linux/sys_soc.h>
>  
>  #define	DRIVER_NAME	"omap2-nand"
>  #define	OMAP_NAND_TIMEOUT_MS	5000
> @@ -181,6 +182,7 @@ struct omap_nand_info {
>  	void (*data_out)(struct nand_chip *chip,
>  			 const void *buf, unsigned int len,
>  			 bool force_8bit);
> +	bool force_32bit;

I believe we should have a driver capability instead of something in
the info structure. You can save the value here as well in the probe if
you want, but I would like this limitation to be tied to the
compatible.

>  };
>  
>  static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
> @@ -2070,6 +2072,25 @@ static void omap_nand_data_in(struct nand_chip *chip, void *buf,
>  	struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
>  	u32 alignment = ((uintptr_t)buf | len) & 3;
>  
> +	if (info->force_32bit) {

I am a little bit bothered by this limitation. The force8_bit flag does
not require the driver to read only 8-bits of the fifo register, it
actually requires to use only the first 8-bits of the NAND bus (which
can also be 16-bit wide). The older implementation just limited the
number of bits reads to be 8 with ioread8, which seems to be a fine
solution but would require more accesses than using ioread16 (or
ioread32) when reading more than 1 byte on platforms with only 8-bit
busses.

My point here is that:
1- the limited controllers cannot be used with a 16-bit bus
2- non-limited controllers can use ioread16 if the bus width is 8-bits

I guess it's fine not to change the logic to avoid breaking boards so
we can just ignore [2] but I belive we should check chip->options &
NAND_BUSWIDTH_16 in ->attach_chip() and refuse probing if this flag is
set.

> +		u32 val;
> +		int left;
> +		u8 *ptr;
> +
> +		ioread32_rep(info->fifo, buf, len >> 2);
> +		left = len & 0x3;
> +		if (left) {
> +			val = ioread32(info->fifo);
> +			ptr = (u8 *)(buf + (len - left));
> +			while (left--) {
> +				*ptr++ = val & 0xff;
> +				val >>= 8;
> +			}
> +		}
> +
> +		return;
> +	}
> +
>  	if (force_8bit || (alignment & 1))
>  		ioread8_rep(info->fifo, buf, len);
>  	else if (alignment & 3)
> @@ -2169,8 +2190,15 @@ static const struct nand_controller_ops omap_nand_controller_ops = {
>  static struct nand_controller omap_gpmc_controller;
>  static bool omap_gpmc_controller_initialized;
>  
> +static const struct of_device_id omap_nand_ids[];
> +

I believe this change should be dropped.

>  static int omap_nand_probe(struct platform_device *pdev)
>  {
> +	const struct soc_device_attribute k3_soc_devices[] = {
> +		{ .family = "AM64X", .revision = "SR1.0" },
> +		{ /* sentinel */ }
> +	};
> +
>  	struct omap_nand_info		*info;
>  	struct mtd_info			*mtd;
>  	struct nand_chip		*nand_chip;
> @@ -2186,6 +2214,12 @@ static int omap_nand_probe(struct platform_device *pdev)
>  
>  	info->pdev = pdev;
>  
> +	/* Some SoC's have 32-bit at least, read limitation */
> +	if (soc_device_match(k3_soc_devices)) {
> +		dev_info(&pdev->dev, "force 32-bit\n");
> +		info->force_32bit = true;
> +	}
> +

As suggested above, just adding a capability structure tied to the
compatible string and retrieved with of_device_get_match_data() should
be enough and replace this manual tree research.

>  	err = omap_get_dt_info(dev, info);
>  	if (err)
>  		return err;
> @@ -2286,6 +2320,7 @@ static int omap_nand_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id omap_nand_ids[] = {
>  	{ .compatible = "ti,omap2-nand", },
> +	{ .compatible = "ti,am64-nand", },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, omap_nand_ids);

The conversion to exec_op looks fine otherwise :)

Thanks,
Miquèl