[PATCH 5.15 214/279] ata: libata: add missing ata_identify_page_supported() calls

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>

commit 06f6c4c6c3e8354dceddd77bd58f9a7a84c67246 upstream.

ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.

Reported-by: Nikolay <knv418@xxxxxxxxx>
Cc: stable@xxxxxxxxxx # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Tested-by: Matthew Perkowski <mgperkow@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/ata/libata-core.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2167,6 +2167,9 @@ static void ata_dev_config_ncq_prio(stru
 	struct ata_port *ap = dev->link->ap;
 	unsigned int err_mask;
 
+	if (!ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
+		return;
+
 	err_mask = ata_read_log_page(dev,
 				     ATA_LOG_IDENTIFY_DEVICE,
 				     ATA_LOG_SATA_SETTINGS,
@@ -2443,7 +2446,8 @@ static void ata_dev_config_devslp(struct
 	 * Check device sleep capability. Get DevSlp timing variables
 	 * from SATA Settings page of Identify Device Data Log.
 	 */
-	if (!ata_id_has_devslp(dev->id))
+	if (!ata_id_has_devslp(dev->id) ||
+	    !ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
 		return;
 
 	err_mask = ata_read_log_page(dev,