Re: [PATCH 1/1] ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins on DKx boards

[Alexandre TORGUE]

On 10/20/21 5:03 PM, Erwan Le Ray wrote:
> Add pull-up to USART3 and UART7 RX pins to allow loop tests between USART3
> and UART7 on stm32mp15 DKx boards.
>
> Signed-off-by: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>

Applied on stm32-next.

thanks
Alex


> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index e13c2a9762b8..fe6e6f50151d 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1816,7 +1816,7 @@
>   		};
>   		pins2 {
>   			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>   
> @@ -1826,7 +1826,7 @@
>   		};
>   		pins2 {
>   			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>   
> @@ -1971,7 +1971,7 @@
>   		pins2 {
>   			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
>   				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>   
> @@ -1988,7 +1988,7 @@
>   		};
>   		pins3 {
>   			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>   
> @@ -2012,7 +2012,7 @@
>   		pins2 {
>   			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
>   				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>   
> @@ -2029,7 +2029,7 @@
>   		};
>   		pins3 {
>   			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> -			bias-disable;
> +			bias-pull-up;
>   		};
>   	};
>