[PATCH net-next 1/4] net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio configuration

From: Maxime Chevallier
Date: Thu Nov 25 2021 - 10:50:04 EST


The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.

Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 80e4b500695e..46b7604805f7 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -38,6 +38,7 @@
#include <net/ipv6.h>
#include <net/tso.h>
#include <net/page_pool.h>
+#include <net/pkt_cls.h>
#include <linux/bpf_trace.h>

/* Registers */
@@ -4908,14 +4909,14 @@ static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
}

static int mvneta_setup_mqprio(struct net_device *dev,
- struct tc_mqprio_qopt *qopt)
+ struct tc_mqprio_qopt_offload *mqprio)
{
struct mvneta_port *pp = netdev_priv(dev);
u8 num_tc;
int i;

- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
- num_tc = qopt->num_tc;
+ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
+ num_tc = mqprio->qopt.num_tc;

if (num_tc > rxq_number)
return -EINVAL;
@@ -4926,13 +4927,15 @@ static int mvneta_setup_mqprio(struct net_device *dev,
return 0;
}

- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
+ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
+ sizeof(pp->prio_tc_map));

mvneta_setup_rx_prio_map(pp);

- netdev_set_num_tc(dev, qopt->num_tc);
- for (i = 0; i < qopt->num_tc; i++)
- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
+ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
+ for (i = 0; i < mqprio->qopt.num_tc; i++)
+ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
+ mqprio->qopt.offset[i]);

return 0;
}
--
2.25.4