Re: [PATCH] serial: amba-pl011: do not request memory region twice

[Lino Sanfilippo]

Hi,

On 26.11.21 at 16:28, Greg KH wrote:
> On Fri, Nov 26, 2021 at 03:39:25PM +0100, Lino Sanfilippo wrote:
>> The driver attempts to request and release the IO memory region for a uart
>> port twice:
>>
>> First during the probe() function devm_ioremap_resource() is used to
>> allocate and map the ports memory.
>> Then a combo of pl011_config_port() and pl011_release_port() is used to
>> request/release the same memory area. These functions are called by the
>> serial core as soon as the uart is registered/unregistered.
>>
>> However since the allocation request via devm_ioremap_resource() already
>> succeeds, the attempt to claim the memory again via pl011_config_port()
>> fails. This failure remains unnoticed, since the concerning return value is
>> not evaluated.
>> Later at module unload also the attempt to release the unclaimed memory
>> in pl011_release_port() fails. This time the failure results in a “Trying
>> to free nonexistent resource" warning printed by the serial core.
>>
>> Fix these issues by removing the callbacks that implement the redundant
>> memory allocation/release.
>>
>> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
>> ---
>>
>> This patch was tested on a 5.10 Raspberry Pi kernel with a CM3.
>
> What commit id does this change fix?
>
> thanks,
>
> greg k-h
>

AFAICS its commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") which
changed  devm_ioremap() in pl011_setup_port() to  devm_ioremap_resource().
Since the latter not only remaps but also requests the memory region it
collides with the memory request in pl011_config_port(). I will add an appropriate
Fixes tag for this.

Regards,
Lino