Re: [PATCH v5 2/3] dt-bindings: iio: frequency: add admv1013 doc

[Jonathan Cameron]

On Tue, 23 Nov 2021 13:53:35 +0200
Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:

> Add device tree bindings for the ADMV1013 Upconverter.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>

Hi Antoniu

One comment inline + as noted in the ABI, I think the freq_mode
belongs in here as something like adi,input-mode or something like that.

Thanks,

Jonathan

> ---
>  - remove powerdown properties from the dt bindings
>  - update quad-se-mode property using strings enum
>  .../bindings/iio/frequency/adi,admv1013.yaml  | 87 +++++++++++++++++++
>  1 file changed, 87 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
> new file mode 100644
> index 000000000000..adbff58cbbf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADMV1013 Microwave Upconverter
> +
> +maintainers:
> +  - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> +
> +description: |
> +   Wideband, microwave upconverter optimized for point to point microwave
> +   radio designs operating in the 24 GHz to 44 GHz frequency range.
> +
> +   https://www.analog.com/en/products/admv1013.html
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,admv1013
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 1000000
> +
> +  clocks:
> +    description:
> +      Definition of the external clock.
> +    minItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: lo_in
> +
> +  clock-output-names:
> +    maxItems: 1

Does it provide a clock?  Whilst there is a high frequency output I'm not
sure anyone would term it a clock or that it would be helfpul to manage
it like that... 

> +
> +  vcm-supply:
> +    description:
> +      Analog voltage regulator.
> +
> +  adi,detector-enable:
> +    description:
> +      Enable the Envelope Detector available at output pins VENV_P and
> +      VENV_N. Disable to reduce power consumption.
> +    type: boolean
> +
> +  adi,quad-se-mode:
> +    description:
> +      Switch the LO path from differential to single-ended operation.
> +      se-neg - Single-Ended Mode, Negative Side Disabled.
> +      se-pos - Single-Ended Mode, Positive Side Disabled.
> +      diff - Differential Mode.
> +    enum: [se-neg, se-pos, diff]
> +
> +  '#clock-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - vcm-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      admv1013@0{
> +        compatible = "adi,admv1013";
> +        reg = <0>;
> +        spi-max-frequency = <1000000>;
> +        clocks = <&admv1013_lo>;
> +        clock-names = "lo_in";
> +        vcm-supply = <&vcm>;
> +        adi,quad-se-mode = "diff";
> +        adi,detector-enable;
> +      };
> +    };
> +...