[PATCH v3 07/20] power: supply: bq25890: Enable charging on boards where we skip reset

[Hans de Goede]

On boards where the "linux,skip-reset" boolean property is set we don't
reset the charger; and on some boards where the fw takes care of
initalizition F_CHG_CFG is set to 0 before handing control over to the OS.

Explicitly set F_CHG_CFG to 1 on boards where we don't reset the charger,
so that charging is always enabled on these boards, like it is always
enabled on boards where we do reset the charger.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/power/supply/bq25890_charger.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index ff8419945618..aa643f533295 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -713,6 +713,17 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 			dev_dbg(bq->dev, "Reset failed %d\n", ret);
 			return ret;
 		}
+	} else {
+		/*
+		 * Ensure charging is enabled, on some boards where the fw
+		 * takes care of initalizition F_CHG_CFG is set to 0 before
+		 * handing control over to the OS.
+		 */
+		ret = bq25890_field_write(bq, F_CHG_CFG, 1);
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Enabling charging failed %d\n", ret);
+			return ret;
+		}
 	}
 
 	/* disable watchdog */
-- 
2.33.1