Re: [patch 17/22] PCI/MSI: Split out !IRQDOMAIN code

[Cédric Le Goater]

On 11/27/21 02:19, Thomas Gleixner wrote:
> Split out the non irqdomain code into its own file.
>
> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> ---
>   drivers/pci/msi/Makefile |    5 ++--
>   drivers/pci/msi/legacy.c |   51 +++++++++++++++++++++++++++++++++++++++++++++++
>   drivers/pci/msi/msi.c    |   46 ------------------------------------------
>   3 files changed, 54 insertions(+), 48 deletions(-)
>
> --- a/drivers/pci/msi/Makefile
> +++ b/drivers/pci/msi/Makefile
> @@ -1,5 +1,6 @@
>   # SPDX-License-Identifier: GPL-2.0
>   #
>   # Makefile for the PCI/MSI
> -obj-$(CONFIG_PCI)		+= pcidev_msi.o
> -obj-$(CONFIG_PCI_MSI)		+= msi.o
> +obj-$(CONFIG_PCI)			+= pcidev_msi.o
> +obj-$(CONFIG_PCI_MSI)			+= msi.o
> +obj-$(CONFIG_PCI_MSI_ARCH_FALLBACKS)	+= legacy.o
> --- /dev/null
> +++ b/drivers/pci/msi/legacy.c
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCI Message Signaled Interrupt (MSI).
> + *
> + * Legacy architecture specific setup and teardown mechanism.
> + */
> +#include "msi.h"


I am getting a :

../drivers/pci/msi/legacy.c:7:10: fatal error: msi.h: No such file or directory
    7 | #include "msi.h"

which seems to be fixed later.

C.

> +
> +/* Arch hooks */
> +int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +{
> +	return -EINVAL;
> +}
> +
> +void __weak arch_teardown_msi_irq(unsigned int irq)
> +{
> +}
> +
> +int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> +	struct msi_desc *desc;
> +	int ret;
> +
> +	/*
> +	 * If an architecture wants to support multiple MSI, it needs to
> +	 * override arch_setup_msi_irqs()
> +	 */
> +	if (type == PCI_CAP_ID_MSI && nvec > 1)
> +		return 1;
> +
> +	for_each_pci_msi_entry(desc, dev) {
> +		ret = arch_setup_msi_irq(dev, desc);
> +		if (ret)
> +			return ret < 0 ? ret : -ENOSPC;
> +	}
> +
> +	return 0;
> +}
> +
> +void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
> +{
> +	struct msi_desc *desc;
> +	int i;
> +
> +	for_each_pci_msi_entry(desc, dev) {
> +		if (desc->irq) {
> +			for (i = 0; i < entry->nvec_used; i++)
> +				arch_teardown_msi_irq(desc->irq + i);
> +		}
> +	}
> +}
> --- a/drivers/pci/msi/msi.c
> +++ b/drivers/pci/msi/msi.c
> @@ -50,52 +50,6 @@ static void pci_msi_teardown_msi_irqs(st
>   #define pci_msi_teardown_msi_irqs	arch_teardown_msi_irqs
>   #endif
>   
> -#ifdef CONFIG_PCI_MSI_ARCH_FALLBACKS
> -/* Arch hooks */
> -int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> -{
> -	return -EINVAL;
> -}
> -
> -void __weak arch_teardown_msi_irq(unsigned int irq)
> -{
> -}
> -
> -int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> -{
> -	struct msi_desc *entry;
> -	int ret;
> -
> -	/*
> -	 * If an architecture wants to support multiple MSI, it needs to
> -	 * override arch_setup_msi_irqs()
> -	 */
> -	if (type == PCI_CAP_ID_MSI && nvec > 1)
> -		return 1;
> -
> -	for_each_pci_msi_entry(entry, dev) {
> -		ret = arch_setup_msi_irq(dev, entry);
> -		if (ret < 0)
> -			return ret;
> -		if (ret > 0)
> -			return -ENOSPC;
> -	}
> -
> -	return 0;
> -}
> -
> -void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
> -{
> -	int i;
> -	struct msi_desc *entry;
> -
> -	for_each_pci_msi_entry(entry, dev)
> -		if (entry->irq)
> -			for (i = 0; i < entry->nvec_used; i++)
> -				arch_teardown_msi_irq(entry->irq + i);
> -}
> -#endif /* CONFIG_PCI_MSI_ARCH_FALLBACKS */
> -
>   /*
>    * PCI 2.3 does not specify mask bits for each MSI interrupt.  Attempting to
>    * mask all MSI interrupts by clearing the MSI enable bit does not work