Re: [PATCH] mfd: Kconfig: change INTEL_SOC_PMIC_CHTDC_TI to bool

[Lee Jones]

On Wed, 24 Nov 2021, Hans de Goede wrote:

> Hi,
> 
> On 11/24/21 16:40, Lee Jones wrote:
> > On Fri, 29 Oct 2021, Mauro Carvalho Chehab wrote:
> > 
> >> The INTEL_SOC_PMIC_CHTDC_TI should be initialized early, before
> >> loading the fbcon driver, as otherwise the i915 driver will
> >> fail to configure pwm:
> >>
> >> [   13.674287] fb0: switching to inteldrmfb from EFI VGA
> >> [   13.682380] Console: switching to colour dummy device 80x25
> >> [   13.682468] i915 0000:00:02.0: vgaarb: deactivate vga console
> >> [   13.682686] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> >> [   13.685773] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> >> [   13.686219] i915 0000:00:02.0: [drm] *ERROR* Failed to configure the pwm chip
> >> [   13.699572] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
> >> [   13.739044] fbcon: i915drmfb (fb0) is primary device
> >> [   14.037792] intel_soc_pmic_exec_mipi_pmic_seq_element: No PMIC registered
> >> ...
> >> [   24.621403] intel_pmic_install_opregion_handler: Ask to register OpRegion for bus ID=PMI2, HID=INT33F5
> >> [   24.630540] intel_pmic_install_opregion_handler: OpRegion registered
> >>
> >> (some extra debug printk's were added to the above)
> >>
> >> As suggested by Hans, this patch also addresses an issue with
> >> the dependencies, as, for this driver to be a bool, it also
> >> need the I2C core and the I2C_DESIGNWARE driver to be builtin.
> >>
> >> Suggested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> >> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> >> ---
> >>  drivers/mfd/Kconfig | 6 +++++-
> >>  1 file changed, 5 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index ca0edab91aeb..f9092c79c4e8 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -632,7 +632,7 @@ config INTEL_SOC_PMIC_CHTWC
> >>  config INTEL_SOC_PMIC_CHTDC_TI
> >>  	tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC"
> >>  	depends on GPIOLIB
> >> -	depends on I2C
> >> +	depends on I2C = y && I2C_DESIGNWARE_PLATFORM=y
> > 
> > The lack of formatting consistency here is eating me up inside!
> > 
> >>  	depends on ACPI
> >>  	depends on X86
> >>  	select MFD_CORE
> >> @@ -642,6 +642,10 @@ config INTEL_SOC_PMIC_CHTDC_TI
> >>  	  Select this option for supporting Dollar Cove (TI version) PMIC
> >>  	  device that is found on some Intel Cherry Trail systems.
> >>  
> >> +	  This option is a bool as it provides an ACPI OpRegion which must be
> >> +	  available before any devices using it are probed. This option also
> >> +	  needs the designware-i2c driver to be builtin for the same reason.
> > 
> > Is there no way around this?
> 
> No unfortunately not, the ACPI device-scan is done really early,
> and in ACPI everything is a function, including e.g. _HID,
> so I've seen _HID method-s reading e.g. GPIOs. So while the
> initial ACPI scan is figuring out what sort of devices it
> is dealing with, we already need working GPIOs (for example).
> 
> Various early ACPI code (AML / the DSDT) tends to access the
> PMICs OpRegion and various problems happen when it is not
> available. For the same reason the other BYT/CHT related
> INTEL_SOC_PMIC_FOO options are already bools.
> 
> I guess that the DSDTs for other Intel SoCs then the BYT/CHT
> SoCs might be a bit cleaner. BYT/CHT was Intel's first serious
> attempt at standard x86 tablet SoC and this shows in various
> places.

Thanks for the explanation.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog