Re: [PATCH] PCI: xgene: Fix IB window setup

[Stéphane Graber]

On Mon, Nov 29, 2021 at 12:36 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
> broke PCI support on XGene. The cause is the IB resources are now sorted
> in address order instead of being in DT dma-ranges order. The result is
> which inbound registers are used for each region are swapped. I don't
> know the details about this h/w, but it appears that IB region 0
> registers can't handle a size greater than 4GB. In any case, limiting
> the size for region 0 is enough to get back to the original assignment
> of dma-ranges to regions.
>
> Reported-by: Stéphane Graber <stgraber@xxxxxxxxxx>
> Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
> Link: https://lore.kernel.org/all/CA+enf=v9rY_xnZML01oEgKLmvY1NGBUUhnSJaETmXtDtXfaczA@xxxxxxxxxxxxxx/
> Cc: stable@xxxxxxxxxxxxxxx # v5.5+
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>

I've been running with this exact change on top of the latest 5.12
stable release for a few days now, so can confirm that on my hardware
it's behaving perfectly (on 4 different servers).

Tested-by: Stéphane Graber <stgraber@xxxxxxxxxx>

> ---
>  drivers/pci/controller/pci-xgene.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
> index 56d0d50338c8..d83dbd977418 100644
> --- a/drivers/pci/controller/pci-xgene.c
> +++ b/drivers/pci/controller/pci-xgene.c
> @@ -465,7 +465,7 @@ static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
>                 return 1;
>         }
>
> -       if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
> +       if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
>                 *ib_reg_mask |= (1 << 0);
>                 return 0;
>         }
> --
> 2.32.0
>