[PATCH 5.4 43/92] pinctrl: armada-37xx: Correct PWM pins definitions

[Greg Kroah-Hartman]

From: Marek Behún <kabel@xxxxxxxxxx>

commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream.

The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).

The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"

This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".

Change the "pwmN" groups to support "led" function.

Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.

Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@xxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt |    8 ++--
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c                               |   17 ++++------
 2 files changed, 12 insertions(+), 13 deletions(-)

--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -166,10 +166,14 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_GPIO("jtag", 20, 5, BIT(0), "jtag"),
 	PIN_GRP_GPIO("sdio0", 8, 3, BIT(1), "sdio"),
 	PIN_GRP_GPIO("emmc_nb", 27, 9, BIT(2), "emmc"),
-	PIN_GRP_GPIO("pwm0", 11, 1, BIT(3), "pwm"),
-	PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
-	PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
-	PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
+	PIN_GRP_GPIO_3("pwm0", 11, 1, BIT(3) | BIT(20), 0, BIT(20), BIT(3),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm1", 12, 1, BIT(4) | BIT(21), 0, BIT(21), BIT(4),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm2", 13, 1, BIT(5) | BIT(22), 0, BIT(22), BIT(5),
+		       "pwm", "led"),
+	PIN_GRP_GPIO_3("pwm3", 14, 1, BIT(6) | BIT(23), 0, BIT(23), BIT(6),
+		       "pwm", "led"),
 	PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
 	PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
 	PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
@@ -183,11 +187,6 @@ static struct armada_37xx_pin_group arma
 	PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
 		      BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
 		      18, 2, "gpio", "uart"),
-	PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
-	PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
-	PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
-	PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
-
 };
 
 static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {