[PATCH] S8036 DTS changes:

[Ali El-Haj-Mahmoud]

- Allow VUART and SuperIO to coexist.
- Minor formatting.
---
 .../linux-aspeed/aspeed-bmc-tyan-s8036.dts    | 23 +++++++++++++++----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/meta-tyan/meta-s8036/recipes-kernel/linux/linux-aspeed/aspeed-bmc-tyan-s8036.dts b/meta-tyan/meta-s8036/recipes-kernel/linux/linux-aspeed/aspeed-bmc-tyan-s8036.dts
index 30b68ce89..7f650f6c8 100644
--- a/meta-tyan/meta-s8036/recipes-kernel/linux/linux-aspeed/aspeed-bmc-tyan-s8036.dts
+++ b/meta-tyan/meta-s8036/recipes-kernel/linux/linux-aspeed/aspeed-bmc-tyan-s8036.dts
@@ -127,10 +127,23 @@
 	status = "okay";
 };
 
+&uart_routing {
+	status = "okay";
+};
+
 &vuart {
 	status = "okay";
-	aspeed,lpc-io-reg = <0x3f8>;
-	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &lpc_ctrl {
@@ -340,7 +353,7 @@
 
 &kcs1 {
 	status = "okay";
-   aspeed,lpc-io-reg = <0xca8>;
+	aspeed,lpc-io-reg = <0xca8>;
 };
 
 &kcs3 {
@@ -385,7 +398,7 @@
 	/*A6*/		"",
 	/*A7*/		"",
 	/*B0-B7*/	"","","","","","","","",
-   /*C0-C7*/  	"","","","","","","","",
+	/*C0-C7*/  	"","","","","","","","",
 	/*D0*/		"",
 	/*D1*/		"",
 	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
@@ -447,6 +460,6 @@
 	/*AA5*/		"",
 	/*AA6*/		"",
 	/*AA7*/		"BMC_ASSERT_BMC_READY",
-   /*AB0*/     "BMC_SPD_SEL", 
+	/*AB0*/     "BMC_SPD_SEL", 
 	/*AB1-AB7*/	"","","","","","","";
 };
-- 
2.34.0.rc2.393.gf8c9666880-goog