Re: [PATCH] tty: serial: Use fifo in 8250 console driver

[Jiri Slaby]

On 25. 01. 22, 10:08, Jiri Slaby wrote:
> On 25. 01. 22, 9:39, Jon Hunter wrote:
> > On 29/10/2021 21:14, wander@xxxxxxxxxx wrote:
> > > From: Wander Lairson Costa <wander@xxxxxxxxxx>
> > >
> > > Note: I am using a small test app + driver located at [0] for the
> > > problem description. serco is a driver whose write function dispatches
> > > to the serial controller. sertest is a user-mode app that writes n bytes
> > > to the serial console using the serco driver.
...
> > > Signed-off-by: Wander Lairson Costa <wander@xxxxxxxxxx>
> >
> >
> > On the current mainline and -next branches, I have noticed that the
> > serial output on many of our Tegra boards is corrupted and so
> > parsing the serial output is failing.
> >
> > Before this change the serial console would appear as follows ...
> >
> > [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd071]
> > [    0.000000] Linux version 5.16.0-rc6-00091-gadbfddc757ae 
> > (jonathanh@jonathanh-vm-01) (aarch64-linux-gnu-gcc (Linaro GCC 
> > 6.4-2017.08) 6.4.1 20170707, GNU ld (Linaro_Binutils-2017.08) 
> > 2.27.0.20161019) #15 SMP PREEMPT Tue Jan 25 00:15:25 PST 2022
> > [    0.000000] Machine model: NVIDIA Jetson TX1 Developer Kit
> >
> > And now I see ...
> >
> > [    0.000000] Booting Linux on physicalfd071]
> > [    0.000000] Linux version 5.16.0-rc6-athanh@j-linux-g017.08) 
> > Linaro_B20161019n 25 00:[    0.000000] Machine model: NVIDIA Jet[ 
> > 0.000000] efi: UEFI not found.
> > [    0.000000] NUMA: No NUMA configurati[    0.000000] NUMA: Faking a 
> > node at [m00000001[    0.000000] NUMA: NODE_DATA [mem 0x17[    
> > 0.000000] Zone ranges:
> >
> > Bisecting is pointing to this commit. Let me know if there are any
> > tests I can run. Otherwise we may need to disable this at least
> > for Tegra.
>
>
> The test is bogus:
>          use_fifo = (up->capabilities & UART_CAP_FIFO) &&
>                  port->fifosize > 1 &&
>                  (serial_port_in(port, UART_FCR) & UART_FCR_ENABLE_FIFO)
>
> FCR is write only. Reading it, one gets IIR contents.

In particular, the test is checking whether there is no interrupt 
pending (UART_FCR_ENABLE_FIFO == UART_IIR_NO_INT). So it oscillates 
between use_fifo and not, depending on the interrupt state of the chip.

Could you change it into something like this:
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3396,7 +3396,7 @@ void serial8250_console_write(struct 
uart_8250_port *up, const char *s,

        use_fifo = (up->capabilities & UART_CAP_FIFO) &&
                port->fifosize > 1 &&
-               (serial_port_in(port, UART_FCR) & UART_FCR_ENABLE_FIFO) &&
+               (up->fcr & UART_FCR_ENABLE_FIFO) &&
                /*
                 * After we put a data in the fifo, the controller will 
send
                 * it regardless of the CTS state. Therefore, only use fifo


And see whether it fixes the issue. Anyway, of what port type is the 
serial port (what says dmesg/setserial about that)?

thanks,
--
js
suse labs