Re: [PATCH 1/2] mm/memory_hotplug: Export shrink span functions for zone and node

[David Hildenbrand]

On 27.01.22 10:41, Jonghyeon Kim wrote:
> On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
>> On 26.01.22 18:00, Jonghyeon Kim wrote:
>>> Export shrink_zone_span() and update_pgdat_span() functions to head
>>> file. We need to update real number of spanned pages for NUMA nodes and
>>> zones when we add memory device node such as device dax memory.
>>>
>>
>> Can you elaborate a bit more what you intend to fix?
>>
>> Memory onlining/offlining is reponsible for updating the node/zone span,
>> and that's triggered when the dax/kmem mamory gets onlined/offlined.
>>
> Sure, sorry for the lack of explanation of the intended fix.
> 
> Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
> cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
> is no problem because node/zone contain these additional non-visible memory
> devices to the system.
> But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
> to new NUMA node(but CPU-less). I think there is no need to hold
> zone[ZONE_DEVICE] pages on the original node.
> 
> Additionally, spanned pages are also used to calculate the end pfn of a node.
> Thus, it is needed to maintain accurate page stats for node/zone.
> 
> My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
> (DC persistent memory modules) with App-Direct mode.
> 
> Below are my test results.
> 
> Before memory onlining:
> 
> 	# ndctl create-namespace --mode=devdax
> 	# ndctl create-namespace --mode=devdax
> 	# cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> 	Node 0, zone      DMA	        spanned  4095
> 	Node 0, zone    DMA32	        spanned  1044480
> 	Node 0, zone   Normal	        spanned  7864320
> 	Node 0, zone  Movable	        spanned  0
> 	Node 0, zone   Device	        spanned  66060288
> 	Node 1, zone      DMA	        spanned  0
> 	Node 1, zone    DMA32	        spanned  0
> 	Node 1, zone   Normal	        spanned  8388608
> 	Node 1, zone  Movable	        spanned  0
> 	Node 1, zone   Device	        spanned  66060288
> 
> After memory onlining:
> 
> 	# daxctl reconfigure-device --mode=system-ram --no-online dax0.0
> 	# daxctl reconfigure-device --mode=system-ram --no-online dax1.0
> 
> 	# cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> 	Node 0, zone      DMA	        spanned  4095
> 	Node 0, zone    DMA32	        spanned  1044480
> 	Node 0, zone   Normal	        spanned  7864320
> 	Node 0, zone  Movable	        spanned  0
> 	Node 0, zone   Device	        spanned  66060288
> 	Node 1, zone      DMA	        spanned  0
> 	Node 1, zone    DMA32	        spanned  0
> 	Node 1, zone   Normal	        spanned  8388608
> 	Node 1, zone  Movable	        spanned  0
> 	Node 1, zone   Device	        spanned  66060288
> 	Node 2, zone      DMA	        spanned  0
> 	Node 2, zone    DMA32	        spanned  0
> 	Node 2, zone   Normal	        spanned  65011712
> 	Node 2, zone  Movable	        spanned  0
> 	Node 2, zone   Device	        spanned  0
> 	Node 3, zone      DMA	        spanned  0
> 	Node 3, zone    DMA32	        spanned  0
> 	Node 3, zone   Normal	        spanned  65011712
> 	Node 3, zone  Movable	        spanned  0
> 	Node 3, zone   Device	        spanned  0
> 
> As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
> This causes problem that Node 0 and Node 2 have same end of pfn values, also 
> Node 1 and Node 3 have same problem.

Thanks for the information, that makes it clearer.

While this unfortunate, the node/zone span is something fairly
unreliable/unusable for user space. Nodes and zones can overlap just easily.

What counts are present/managed pages in the node/zone.

So at least I don't count this as something that "needs fixing",
it's more something that's nice to handle better if easily possible.

See below.

> 
>>> Signed-off-by: Jonghyeon Kim <tome01@xxxxxxxxxx>
>>> ---
>>>  include/linux/memory_hotplug.h | 3 +++
>>>  mm/memory_hotplug.c            | 6 ++++--
>>>  2 files changed, 7 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
>>> index be48e003a518..25c7f60c317e 100644
>>> --- a/include/linux/memory_hotplug.h
>>> +++ b/include/linux/memory_hotplug.h
>>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
>>>  extern void remove_pfn_range_from_zone(struct zone *zone,
>>>  				       unsigned long start_pfn,
>>>  				       unsigned long nr_pages);
>>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> +			     unsigned long end_pfn);
>>> +extern void update_pgdat_span(struct pglist_data *pgdat);
>>>  extern bool is_memblock_offlined(struct memory_block *mem);
>>>  extern int sparse_add_section(int nid, unsigned long pfn,
>>>  		unsigned long nr_pages, struct vmem_altmap *altmap);
>>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>>> index 2a9627dc784c..38f46a9ef853 100644
>>> --- a/mm/memory_hotplug.c
>>> +++ b/mm/memory_hotplug.c
>>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
>>>  	return 0;
>>>  }
>>>  
>>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>  			     unsigned long end_pfn)
>>>  {
>>>  	unsigned long pfn;
>>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>  		}
>>>  	}
>>>  }
>>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
>>
>> Exporting both as symbols feels very wrong. This is memory
>> onlining/offlining internal stuff.
> 
> I agree with you that your comment. I will find another approach to avoid
> directly using onlining/offlining internal stuff while updating node/zone span.

IIRC, to handle what you intend to handle properly want to look into teaching
remove_pfn_range_from_zone() to handle zone_is_zone_device().

There is a big fat comment:

	/*
	 * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
	 * we will not try to shrink the zones - which is okay as
	 * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
	 */
	if (zone_is_zone_device(zone))
		return;


Similarly, try_offline_node() spells this out:

	/*
	 * If the node still spans pages (especially ZONE_DEVICE), don't
	 * offline it. A node spans memory after move_pfn_range_to_zone(),
	 * e.g., after the memory block was onlined.
	 */
	if (pgdat->node_spanned_pages)
		return;


So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
try_offline_node() implicitly.

Trying to update the node span manually without teaching node/zone shrinking code how to
handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
won't work if the range of interest is still surrounded by other ranges.

-- 
Thanks,

David / dhildenb