[PATCH] drm/bridge: anx7625: Set downstream sink into normal status

[Xin Ji]

As downstream sink was set into standby mode while bridge disabled,
this patch used for setting downstream sink into normal status
while enable bridge.

Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 9aab879a8851..963eaf73ecab 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -919,12 +919,20 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
 {
 	int ret;
 	struct device *dev = &ctx->client->dev;
+	u8 data;
 
 	if (!ctx->display_timing_valid) {
 		DRM_DEV_ERROR(dev, "mipi not set display timing yet.\n");
 		return;
 	}
 
+	dev_info(dev, "set downstream sink into normal\n");
+	/* Downstream sink enter into normal mode */
+	data = 1;
+	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+	if (ret < 0)
+		dev_err(dev, "IO error : set sink into normal mode fail\n");
+
 	/* Disable HDCP */
 	anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
 
-- 
2.25.1