Re: drm/bridge: anx7625: Set downstream sink into normal status

[Pin-yen Lin]

Reviewed-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>


On Wed, Mar 2, 2022 at 8:09 PM Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
>
> As downstream sink was set into standby mode while bridge disabled,
> this patch used for setting downstream sink into normal status
> while enable bridge.
>
> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 9aab879a8851..963eaf73ecab 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -919,12 +919,20 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
>  {
>         int ret;
>         struct device *dev = &ctx->client->dev;
> +       u8 data;
>
>         if (!ctx->display_timing_valid) {
>                 DRM_DEV_ERROR(dev, "mipi not set display timing yet.\n");
>                 return;
>         }
>
> +       dev_info(dev, "set downstream sink into normal\n");
> +       /* Downstream sink enter into normal mode */
> +       data = 1;
> +       ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> +       if (ret < 0)
> +               dev_err(dev, "IO error : set sink into normal mode fail\n");
> +
>         /* Disable HDCP */
>         anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
>