Re: [PATCH] usb: xhci: make XHCI_STOP_EP_CMD_TIMEOUT a module parameter
From: Martin Kepplinger
Date: Fri Mar 04 2022 - 06:52:33 EST
Am Freitag, dem 04.03.2022 um 12:30 +0100 schrieb Martin Kepplinger:
> On the Librem 5 imx8mq system we've seen the stop endpoint command
> time out regularly which results in the hub dying.
sorry this is pretty useless information. We see this on an internal
USB2642 USB 2.0 Hub by Microchip.
>
> While on the one hand we see "Port resume timed out, port 1-1: 0xfe3"
> before this and on the other hand driver-comments suggest that the
> driver
> might be able to recover instead of dying here, Sarah seemed to have
> a
> workaround for this particulator problem in mind already:
>
> Make it a module parameter. So while it might not be the root cause
> for
> the problem, do this to give users a workaround.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> ---
> drivers/usb/host/xhci-ring.c | 2 +-
> drivers/usb/host/xhci.c | 8 +++++++-
> drivers/usb/host/xhci.h | 3 +--
> 3 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-
> ring.c
> index d0b6806275e0..e631d408e6b2 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -1133,7 +1133,7 @@ static void xhci_handle_cmd_stop_ep(struct
> xhci_hcd *xhci, int slot_id,
> xhci_stop_watchdog_timer_in_irq(xhci,
> ep);
>
> mod_timer(&ep->stop_cmd_timer,
> - jiffies + XHCI_STOP_EP_CMD_TIMEOUT
> * HZ);
> + jiffies + xhci->stop_ep_cmd_timeout
> * HZ);
> xhci_queue_stop_endpoint(xhci, command,
> slot_id, ep_index, 0);
> xhci_ring_cmd_db(xhci);
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index a1c781f70d02..37fd05e75dcf 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -37,6 +37,11 @@ static unsigned long long quirks;
> module_param(quirks, ullong, S_IRUGO);
> MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as
> default");
>
> +static unsigned int stop_ep_cmd_timeout = 5;
> +module_param(stop_ep_cmd_timeout, uint, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(stop_ep_cmd_timeout,
> + "Stop endpoint command timeout (secs) for URB cancel
> watchdog. default=5");
> +
> static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
> {
> struct xhci_segment *seg = ring->first_seg;
> @@ -1849,7 +1854,7 @@ static int xhci_urb_dequeue(struct usb_hcd
> *hcd, struct urb *urb, int status)
> }
> ep->ep_state |= EP_STOP_CMD_PENDING;
> ep->stop_cmd_timer.expires = jiffies +
> - XHCI_STOP_EP_CMD_TIMEOUT * HZ;
> + xhci->stop_ep_cmd_timeout * HZ;
> add_timer(&ep->stop_cmd_timer);
> xhci_queue_stop_endpoint(xhci, command, urb->dev-
> >slot_id,
> ep_index, 0);
> @@ -5288,6 +5293,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
> xhci_get_quirks_t get_quirks)
> xhci->hcc_params2 = readl(&xhci->cap_regs-
> >hcc_params2);
>
> xhci->quirks |= quirks;
> + xhci->stop_ep_cmd_timeout = stop_ep_cmd_timeout;
>
> get_quirks(dev, xhci);
>
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 8a0026ee9524..80c9ced4a276 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1674,8 +1674,6 @@ struct urb_priv {
> #define ERST_NUM_SEGS 1
> /* Poll every 60 seconds */
> #define POLL_TIMEOUT 60
> -/* Stop endpoint command timeout (secs) for URB cancellation
> watchdog timer */
> -#define XHCI_STOP_EP_CMD_TIMEOUT 5
> /* XXX: Make these module parameters */
>
> struct s3_save {
> @@ -1899,6 +1897,7 @@ struct xhci_hcd {
> #define XHCI_BROKEN_D3COLD BIT_ULL(41)
> #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
>
> + unsigned int stop_ep_cmd_timeout;
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> struct xhci_port *hw_ports;