Re: [PATCH v2 4/4] dt-bindings: display/panel: Add Leadtek ltk035c5444t

[Rob Herring]

On Tue, Mar 08, 2022 at 02:06:43PM +0100, Christophe Branchereau wrote:
> Add binding for the leadtek ltk035c5444t, which is a 640x480
> mipi-dbi over spi / 24-bit RGB panel based on the newvision
> NV03052C chipset.
> 
> It is found in the Anbernic RG350M mips handheld.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
> ---
>  .../panel/leadtek,ltk035c5444t-spi.yaml       | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml

We have 18 SPI based panels already:

$ git grep -i 'spi.* {' Documentation/devicetree/bindings/display/panel/
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml:    spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml:    spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml:    spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml:    spi {
Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml:    spi {
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml:    spi {
Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml:    spi {
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml:    spi {
Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml:    spi0 {
Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml:    spi {
Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml:    spi {
Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml:    spi {
Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml:    spi {
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml:    spi {
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml:    spi {
Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml:    spi {
Documentation/devicetree/bindings/display/panel/tpo,td.yaml:    spi {
Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml:    spi {

Most except for the Samsung ones look like they'd fit in our definition 
of 'simple panels' which primarily means 1 supply.

So I think it is time for a panel-simple-spi.yaml binding to combine all 
these. But I'm not going to make the person adding the 19th case to do 
that, and this otherwise looks fine:

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

With one nit fixed below:

> 
> diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
> new file mode 100644
> index 000000000000..9b6f1810adab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t-spi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
> +
> +maintainers:
> +  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> +  - Christophe Branchereau <cbranchereau@xxxxxxxxx>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> +  compatible:
> +    const: leadtek,ltk035c5444t-spi

'-spi' is redundant, so drop.

> +
> +  backlight: true
> +  port: true
> +  power-supply: true
> +  reg: true
> +  reset-gpios: true
> +
> +required:
> +  - compatible
> +  - power-supply
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        panel@0 {
> +            compatible = "leadtek,ltk035c5444t-spi";

And update the example...

> +            reg = <0>;
> +
> +            spi-3wire;
> +            spi-max-frequency = <3125000>;
> +
> +            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
> +
> +            backlight = <&backlight>;
> +            power-supply = <&vcc>;
> +
> +            port {
> +                panel_input: endpoint {
> +                    remote-endpoint = <&panel_output>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.34.1
> 
>