Re: [PATCH v2 4/4] dt-bindings: display/panel: Add Leadtek ltk035c5444t

From: Paul Cercueil
Date: Fri Mar 11 2022 - 08:05:31 EST


Hi Rob,

Le jeu., mars 10 2022 at 16:30:26 -0600, Rob Herring <robh@xxxxxxxxxx> a écrit :
On Tue, Mar 08, 2022 at 02:06:43PM +0100, Christophe Branchereau wrote:
Add binding for the leadtek ltk035c5444t, which is a 640x480
mipi-dbi over spi / 24-bit RGB panel based on the newvision
NV03052C chipset.

It is found in the Anbernic RG350M mips handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
---
.../panel/leadtek,ltk035c5444t-spi.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml

We have 18 SPI based panels already:

$ git grep -i 'spi.* {' Documentation/devicetree/bindings/display/panel/
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml: spi {
Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml: spi {
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml: spi {
Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml: spi {
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml: spi {
Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml: spi0 {
Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml: spi {
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml: spi {
Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml: spi {
Documentation/devicetree/bindings/display/panel/tpo,td.yaml: spi {
Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml: spi {

Most except for the Samsung ones look like they'd fit in our definition
of 'simple panels' which primarily means 1 supply.

So I think it is time for a panel-simple-spi.yaml binding to combine all
these. But I'm not going to make the person adding the 19th case to do
that, and this otherwise looks fine:

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

I actually thought you sent a patch for this already (I remember you talking about it last a binding for a new SPI panel has been added).

I will work on it next week - provided Cristophe's patch has been merged before.

Cheers,
-Paul


With one nit fixed below:


diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
new file mode 100644
index 000000000000..9b6f1810adab
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+ - Christophe Branchereau <cbranchereau@xxxxxxxxx>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: leadtek,ltk035c5444t-spi

'-spi' is redundant, so drop.

+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "leadtek,ltk035c5444t-spi";

And update the example...

+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
--
2.34.1