RE: [PATCH net-next v9 2/2] net: ethernet: Add driver for Sunplus SP7021

[Wells Lu 呂芳騰]

Hi Stephen,


> > +int spl2sw_rx_poll(struct napi_struct *napi, int budget) {
> > +	struct spl2sw_common *comm = container_of(napi, struct spl2sw_common, rx_napi);
> > +	struct spl2sw_mac_desc *desc, *h_desc;
> > +	struct net_device_stats *stats;
> > +	struct sk_buff *skb, *new_skb;
> > +	struct spl2sw_skb_info *sinfo;
> > +	int budget_left = budget;
> > +	u32 rx_pos, pkg_len;
> > +	u32 num, rx_count;
> > +	s32 queue;
> > +	u32 mask;
> > +	int port;
> > +	u32 cmd;
> > +
> > +	/* Process high-priority queue and then low-priority queue. */
> > +	for (queue = 0; queue < RX_DESC_QUEUE_NUM; queue++) {
> > +		rx_pos = comm->rx_pos[queue];
> > +		rx_count = comm->rx_desc_num[queue];
> > +
> > +		for (num = 0; num < rx_count && budget_left; num++) {
> > +			sinfo = comm->rx_skb_info[queue] + rx_pos;
> > +			desc = comm->rx_desc[queue] + rx_pos;
> > +			cmd = desc->cmd1;
> > +
> > +			if (cmd & RXD_OWN)
> > +				break;
> > +
> > +			port = FIELD_GET(RXD_PKT_SP, cmd);
> > +			if (port < MAX_NETDEV_NUM && comm->ndev[port])
> > +				stats = &comm->ndev[port]->stats;
> > +			else
> > +				goto spl2sw_rx_poll_rec_err;
> > +
> > +			pkg_len = FIELD_GET(RXD_PKT_LEN, cmd);
> > +			if (unlikely((cmd & RXD_ERR_CODE) || pkg_len < ETH_ZLEN + 4)) {
> > +				stats->rx_length_errors++;
> > +				stats->rx_dropped++;
> > +				goto spl2sw_rx_poll_rec_err;
> > +			}
> > +
> > +			dma_unmap_single(&comm->pdev->dev, sinfo->mapping,
> > +					 comm->rx_desc_buff_size, DMA_FROM_DEVICE);
> > +
> > +			skb = sinfo->skb;
> > +			skb_put(skb, pkg_len - 4); /* Minus FCS */
> > +			skb->ip_summed = CHECKSUM_NONE;
> > +			skb->protocol = eth_type_trans(skb, comm->ndev[port]);
> > +			netif_receive_skb(skb);
> > +
> > +			stats->rx_packets++;
> > +			stats->rx_bytes += skb->len;
> > +
> > +			/* Allocate a new skb for receiving. */
> > +			new_skb = netdev_alloc_skb(NULL, comm->rx_desc_buff_size);
> > +			if (unlikely(!new_skb)) {
> > +				desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> > +					     RXD_EOR : 0;
> > +				sinfo->skb = NULL;
> > +				sinfo->mapping = 0;
> > +				desc->addr1 = 0;
> > +				goto spl2sw_rx_poll_alloc_err;
> > +			}
> > +
> > +			sinfo->mapping = dma_map_single(&comm->pdev->dev, new_skb->data,
> > +							comm->rx_desc_buff_size,
> > +							DMA_FROM_DEVICE);
> > +			if (dma_mapping_error(&comm->pdev->dev, sinfo->mapping)) {
> > +				dev_kfree_skb_irq(new_skb);
> > +				desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> > +					     RXD_EOR : 0;
> > +				sinfo->skb = NULL;
> > +				sinfo->mapping = 0;
> > +				desc->addr1 = 0;
> > +				goto spl2sw_rx_poll_alloc_err;
> > +			}
> > +
> > +			sinfo->skb = new_skb;
> > +			desc->addr1 = sinfo->mapping;
> > +
> > +spl2sw_rx_poll_rec_err:
> > +			desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> > +				     RXD_EOR | comm->rx_desc_buff_size :
> > +				     comm->rx_desc_buff_size;
> > +
> > +			wmb();	/* Set RXD_OWN after other fields are effective. */
> > +			desc->cmd1 = RXD_OWN;
> > +
> > +spl2sw_rx_poll_alloc_err:
> > +			/* Move rx_pos to next position */
> > +			rx_pos = ((rx_pos + 1) == comm->rx_desc_num[queue]) ? 0 : rx_pos +
> > +1;
> > +
> > +			budget_left--;
> > +
> > +			/* If there are packets in high-priority queue,
> > +			 * stop processing low-priority queue.
> > +			 */
> > +			if (queue == 1 && !(h_desc->cmd1 & RXD_OWN))
> > +				break;
> > +		}
> > +
> > +		comm->rx_pos[queue] = rx_pos;
> > +
> > +		/* Save pointer to last rx descriptor of high-priority queue. */
> > +		if (queue == 0)
> > +			h_desc = comm->rx_desc[queue] + rx_pos;
> > +	}
> > +
> > +	wmb();	/* make sure settings are effective. */
> > +	mask = readl(comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> > +	mask &= ~MAC_INT_RX;
> > +	writel(mask, comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> > +
> > +	napi_complete(napi);
> > +	return 0;
> > +}
> > +
> > +int spl2sw_tx_poll(struct napi_struct *napi, int budget) {
> > +	struct spl2sw_common *comm = container_of(napi, struct spl2sw_common, tx_napi);
> > +	struct spl2sw_skb_info *skbinfo;
> > +	struct net_device_stats *stats;
> > +	int budget_left = budget;
> > +	u32 tx_done_pos;
> > +	u32 mask;
> > +	u32 cmd;
> > +	int i;
> > +
> > +	spin_lock(&comm->tx_lock);
> > +
> > +	tx_done_pos = comm->tx_done_pos;
> > +	while (((tx_done_pos != comm->tx_pos) || (comm->tx_desc_full == 1)) && budget_left)
> {
> > +		cmd = comm->tx_desc[tx_done_pos].cmd1;
> > +		if (cmd & TXD_OWN)
> > +			break;
> > +
> > +		skbinfo = &comm->tx_temp_skb_info[tx_done_pos];
> > +		if (unlikely(!skbinfo->skb))
> > +			goto spl2sw_tx_poll_next;
> > +
> > +		i = ffs(FIELD_GET(TXD_VLAN, cmd)) - 1;
> > +		if (i < MAX_NETDEV_NUM && comm->ndev[i])
> > +			stats = &comm->ndev[i]->stats;
> > +		else
> > +			goto spl2sw_tx_poll_unmap;
> > +
> > +		if (unlikely(cmd & (TXD_ERR_CODE))) {
> > +			stats->tx_errors++;
> > +		} else {
> > +			stats->tx_packets++;
> > +			stats->tx_bytes += skbinfo->len;
> > +		}
> > +
> > +spl2sw_tx_poll_unmap:
> > +		dma_unmap_single(&comm->pdev->dev, skbinfo->mapping, skbinfo->len,
> > +				 DMA_TO_DEVICE);
> > +		skbinfo->mapping = 0;
> > +		dev_kfree_skb_irq(skbinfo->skb);
> > +		skbinfo->skb = NULL;
> > +
> > +spl2sw_tx_poll_next:
> > +		/* Move tx_done_pos to next position */
> > +		tx_done_pos = ((tx_done_pos + 1) == TX_DESC_NUM) ? 0 : tx_done_pos
> > ++ 1;
> > +
> > +		if (comm->tx_desc_full == 1)
> > +			comm->tx_desc_full = 0;
> > +
> > +		budget_left--;
> > +	}
> > +
> > +	comm->tx_done_pos = tx_done_pos;
> > +	if (!comm->tx_desc_full)
> > +		for (i = 0; i < MAX_NETDEV_NUM; i++)
> > +			if (comm->ndev[i])
> > +				if (netif_queue_stopped(comm->ndev[i]))
> > +					netif_wake_queue(comm->ndev[i]);
> > +
> > +	spin_unlock(&comm->tx_lock);
> > +
> > +	wmb();			/* make sure settings are effective. */
> > +	mask = readl(comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> > +	mask &= ~MAC_INT_TX;
> > +	writel(mask, comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> > +
> > +	napi_complete(napi);
> > +	return 0;
> > +}
> 
> This doesn't look like it is doing NAPI properly.
> 
> The driver is supposed to return the amount of packets processed.
> If budget is used, it should return budget.

I'll modify code to return the amount of processed packets:

	return budge - budget_left;


Thank you for your review.


Best regards,
Wells