Re: [PATCH v3 1/2] dt-bindings: interconnect: Add MediaTek CCI dt-bindings

From: Chen-Yu Tsai
Date: Mon Apr 25 2022 - 23:18:26 EST


On Mon, Apr 25, 2022 at 8:56 PM Johnson Wang <johnson.wang@xxxxxxxxxxxx> wrote:
>
> Add devicetree binding of MediaTek CCI on MT8183 and MT8186.
>
> Signed-off-by: Johnson Wang <johnson.wang@xxxxxxxxxxxx>
> Signed-off-by: Jia-Wei Chang <jia-wei.chang@xxxxxxxxxxxx>
> ---
> .../bindings/interconnect/mediatek,cci.yaml | 139 ++++++++++++++++++
> 1 file changed, 139 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
>
> diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
> new file mode 100644
> index 000000000000..e5221e17d11b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
> @@ -0,0 +1,139 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
> +
> +maintainers:
> + - Jia-Wei Chang <jia-wei.chang@xxxxxxxxxxxx>
> +
> +description: |
> + MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
> + MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
> + hardware. It can also optimize the voltage to reduce the power consumption.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-cci
> + - mediatek,mt8186-cci
> +
> + clocks:
> + items:
> + - description:
> + The multiplexer for clock input of CPU cluster.

of the bus, not CPU cluster.

> + - description:
> + A parent of "cpu" clock which is used as an intermediate clock source
> + when the original CPU is under transition and not stable yet.

This really should be handled in the clk controller, and not by every device
that happens to take a clock from a mux with upstream PLLs that can change
in clock rate. The end device hardware only takes one clock input. That's it.

> +
> + clock-names:
> + items:
> + - const: cci
> + - const: intermediate
> +
> + operating-points-v2: true
> + opp-table: true
> +
> + proc-supply:
> + description:
> + Phandle of the regulator for CCI that provides the supply voltage.
> +
> + sram-supply:
> + description:
> + Phandle of the regulator for sram of CCI that provides the supply
> + voltage. When it presents, the cci devfreq driver needs to do

When it is present, the implementation needs to ...

ChenYu

> + "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
> + SoC specific needs. When absent, the voltage scaling flow is handled by
> + hardware, hence no software "voltage tracking" is needed.
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - operating-points-v2
> + - proc-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + cci: cci {
> + compatible = "mediatek,mt8183-cci";
> + clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
> + clock-names = "cci", "intermediate";
> + operating-points-v2 = <&cci_opp>;
> + proc-supply = <&mt6358_vproc12_reg>;
> + };
> +
> + cci_opp: opp-table-cci {
> + compatible = "operating-points-v2";
> + opp-shared;
> + opp2_00: opp-273000000 {
> + opp-hz = /bits/ 64 <273000000>;
> + opp-microvolt = <650000>;
> + };
> + opp2_01: opp-338000000 {
> + opp-hz = /bits/ 64 <338000000>;
> + opp-microvolt = <687500>;
> + };
> + opp2_02: opp-403000000 {
> + opp-hz = /bits/ 64 <403000000>;
> + opp-microvolt = <718750>;
> + };
> + opp2_03: opp-463000000 {
> + opp-hz = /bits/ 64 <463000000>;
> + opp-microvolt = <756250>;
> + };
> + opp2_04: opp-546000000 {
> + opp-hz = /bits/ 64 <546000000>;
> + opp-microvolt = <800000>;
> + };
> + opp2_05: opp-624000000 {
> + opp-hz = /bits/ 64 <624000000>;
> + opp-microvolt = <818750>;
> + };
> + opp2_06: opp-689000000 {
> + opp-hz = /bits/ 64 <689000000>;
> + opp-microvolt = <850000>;
> + };
> + opp2_07: opp-767000000 {
> + opp-hz = /bits/ 64 <767000000>;
> + opp-microvolt = <868750>;
> + };
> + opp2_08: opp-845000000 {
> + opp-hz = /bits/ 64 <845000000>;
> + opp-microvolt = <893750>;
> + };
> + opp2_09: opp-871000000 {
> + opp-hz = /bits/ 64 <871000000>;
> + opp-microvolt = <906250>;
> + };
> + opp2_10: opp-923000000 {
> + opp-hz = /bits/ 64 <923000000>;
> + opp-microvolt = <931250>;
> + };
> + opp2_11: opp-962000000 {
> + opp-hz = /bits/ 64 <962000000>;
> + opp-microvolt = <943750>;
> + };
> + opp2_12: opp-1027000000 {
> + opp-hz = /bits/ 64 <1027000000>;
> + opp-microvolt = <975000>;
> + };
> + opp2_13: opp-1092000000 {
> + opp-hz = /bits/ 64 <1092000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp2_14: opp-1144000000 {
> + opp-hz = /bits/ 64 <1144000000>;
> + opp-microvolt = <1025000>;
> + };
> + opp2_15: opp-1196000000 {
> + opp-hz = /bits/ 64 <1196000000>;
> + opp-microvolt = <1050000>;
> + };
> + };
> --
> 2.18.0
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek