Re: [PATCH printk v5 1/1] printk: extend console_lock for per-console locking

[Petr Mladek]

On Wed 2022-04-27 18:21:16, John Ogness wrote:
> Hi Marek,
> 
> On 2022-04-27, Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> wrote:
> > Here is the full serial console log:
> >
> > https://pastebin.com/E5CDH88L
> 
> Here are a few ideas from me:
> 
> 1. For next-20220427 the printk-threaded series was slightly changed. I
> do not expect it to work any different, but I would prefer we are
> debugging the current version. If possible, could you move to
> next-20220427?
> 
> 2. I noticed you boot with the kernel boot arguments "earlycon" and
> "no_console_suspend". Could you try booting without this? I expect this
> will make no difference.
> 
> 3. It looks like the problem happens quite late in the boot process. I
> expect it is due to some userspace process that is running that is
> interacting with printk (either /dev/kmsg or /proc/kmsg) and is causing
> problems. If you boot with init=/bin/sh then I expect the system is
> running fine. (You don't have much of a system running, but it should
> not hang.) We need to isolate which userspace process is triggering the
> issue.

Interesting idea.


> 4. Have you tried issuing magic sysrq commands on the serial line? (For
> example, sending a break signal and then the letter 't' or sending a
> break signal and then the letter 'c'?) That might trigger various dumps
> so that we can see the system state.

I see that sshd is started. If you are able to connect the system
with the frozen login via ssh then it might be easier to trigger
sysrq via procfs, for example:

  #> echo t >/proc/sysrq-trigger

"sysrq t" should print state of all processes. It might show what process
is hanging and where.


> 5. You are not running a VT console, so the graphics driver should not
> be affecting the printk subsystem at all. I expect your autologin is
> also starting various services and programs. If you disable the
> automatic login and instead manually login (perhaps as another user) can
> you manually start those services one at a time to see at what point the
> system hangs?

Yeah, I am not able to reproduce it and some more clues would help.

Best Regards,
Petr