Re: [PATCH v3 5/6] dt-bindings: net: dsa: make reset optional and add rgmii-mode to mt7531

[Krzysztof Kozlowski]

On 08/05/2022 19:04, Peter Geis wrote:
> On Sun, May 8, 2022 at 8:12 AM Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> wrote:
>>>
>>> I think the issue is more for the description itself.
>>>
>>> Devicetree is only meant to describe the hardware and does in general don't
>>> care how any firmware (Linux-kernel, *BSD, etc) handles it. So going with
>>> "the kernel does it this way" is not a valid reason for a binding change ;-) .

Exactly. The argument in commit msg was not matching the change, because
driver implementation should not be (mostly) a reason for such changes.

>>>
>>> Instead in general want to reason that there are boards without this reset
>>> facility and thus make it optional for those.
>>
>> if only the wording is the problem i try to rephrase it from hardware PoV.
>>
>> maybe something like this?
>>
>> https://github.com/frank-w/BPI-R2-4.14/commits/5.18-mt7531-mainline2/Documentation/devicetree/bindings/net/dsa/mediatek%2Cmt7530.yaml

Looks ok.

>>
>> Another way is maybe increasing the delay after the reset (to give more time all
>> come up again), but imho it is no good idea resetting the gmac/mdio-bus from the
>> child device.
>>
>> have not looked into the gmac driver if this always  does the initial reset to
>> have a "clean state". In this initial reset the switch will be resetted too
>> and does not need an additional one which needs the gmac/mdio initialization
>> to be done again.
> 
> For clarification, the reset gpio line is purely to reset the phy.
> If having the switch driver own the reset gpio instead of the gmac
> breaks initialization that means there's a bug in the gmac driver
> handling phy init.
> In testing I've seen issues moving the reset line to the mdio node
> with other phys and the stmmac gmac driver, so I do believe this is
> the case.

Yes, this seems reasonable, although Frank mentioned that reset is
shared with gmac, so it resets some part of it as well?




Best regards,
Krzysztof