[PATCH 3/4] arm64: dts: qcom: sdm630: order regs according to bindings

[Krzysztof Kozlowski]

The CAMSS DTSI device node, which came after the bindings were merged,
got the regs ordered differently then specified in the bindings:

  sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:0: 'csi_clk_mux' was expected

Reordering them to match bindings should not cause ABI issues, because
the driver relies on names, not ordering.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 8f623238c238..594a802e9429 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1842,32 +1842,32 @@ pil-reloc@94c {
 
 		camss: camss@ca00000 {
 			compatible = "qcom,sdm660-camss";
-			reg = <0x0c824000 0x1000>,
+			reg = <0x0ca00020 0x10>,
+			      <0x0ca30000 0x100>,
+			      <0x0ca30400 0x100>,
+			      <0x0ca30800 0x100>,
+			      <0x0ca30c00 0x100>,
+			      <0x0c824000 0x1000>,
 			      <0x0ca00120 0x4>,
 			      <0x0c825000 0x1000>,
 			      <0x0ca00124 0x4>,
 			      <0x0c826000 0x1000>,
 			      <0x0ca00128 0x4>,
-			      <0x0ca30000 0x100>,
-			      <0x0ca30400 0x100>,
-			      <0x0ca30800 0x100>,
-			      <0x0ca30c00 0x100>,
 			      <0x0ca31000 0x500>,
-			      <0x0ca00020 0x10>,
 			      <0x0ca10000 0x1000>,
 			      <0x0ca14000 0x1000>;
-			reg-names = "csiphy0",
+			reg-names = "csi_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "csiphy0",
 				    "csiphy0_clk_mux",
 				    "csiphy1",
 				    "csiphy1_clk_mux",
 				    "csiphy2",
 				    "csiphy2_clk_mux",
-				    "csid0",
-				    "csid1",
-				    "csid2",
-				    "csid3",
 				    "ispif",
-				    "csi_clk_mux",
 				    "vfe0",
 				    "vfe1";
 			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
-- 
2.32.0