2 s boot time regression between 5.17 and 5.18-rc4?

From: Paul Menzel
Date: Sun May 15 2022 - 18:09:37 EST

Next message: Steven Rostedt: "Re: [PATCH mm] tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate"
Previous message: Steven Rostedt: "Re: [PATCH mm v2] tracing: incorrect gfp_t conversion"
Next in thread: Jason A. Donenfeld: "Re: 2 s boot time regression between 5.17 and 5.18-rc4?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Dear Linux folks,

Looking at the timestamps I only just noticed a two second regression. The line below

systemd[1]: Created slice Slice /system/getty.

is logged two seconds later. I haven’t debugged yet, and wanted to report it early. (No idea if it’s even related to the random subsystem.)

### 5.17-rc8

```
[ 0.000000] Linux version 5.17.0-rc8-00254-g24544474c7a3 (root@45e877da5b3e) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #292 SMP PREEMPT Sat Mar 19 17:58:03 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0 apic=verbose
[…]
[ 0.495882] Run /sbin/init as init process
[ 0.495883] with arguments:
[ 0.495884] /sbin/init
[ 0.495885] noisapnp
[ 0.495886] with environment:
[ 0.495887] HOME=/
[ 0.495887] TERM=linux
[ 0.495888] BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3
[ 0.508902] random: random: 1
[ 0.508906] random: random: 2
[ 0.508906] random: random: 3
[ 0.508907] random: random: 4
[ 0.535152] random: random: 1
[ 0.535155] random: random: 2
[ 0.535156] random: random: 3
[ 0.535157] random: random: 4
[ 0.535158] random: fast init done
[ 0.656129] systemd[1]: Inserted module 'autofs4'
[ 0.670092] NET: Registered PF_INET6 protocol family
[ 0.670798] Segment Routing with IPv6
[ 0.670817] In-situ OAM (IOAM) with IPv6
[ 0.688171] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 0.688462] systemd[1]: Detected architecture x86-64.
[ 0.689648] systemd[1]: Hostname set to <kodi>.
[ 0.882098] systemd[1]: Queued start job for default target Graphical Interface.
[ 0.882399] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.884599] systemd[1]: Created slice Slice /system/getty.
[…]
```

### 5.18-rc4+ (based on commit 38d741cb70b3 (Merge tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm)

```
[ 0.000000] Linux version 5.18.0-rc4-00303-g7c523829a82e (root@4beb429beb4a) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #349 SMP PREEMPT_DYNAMIC Fri Apr 29 06:33:06 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc4-00303-g7c523829a82e root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0
[…]
[ 0.536857] Run /sbin/init as init process
[ 0.536859] with arguments:
[ 0.536860] /sbin/init
[ 0.536861] noisapnp
[ 0.536862] with environment:
[ 0.536862] HOME=/
[ 0.536863] TERM=linux
[ 0.536864] BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc4-00303-g7c523829a82e
[ 0.592103] random: fast init done
[ 0.708529] systemd[1]: Inserted module 'autofs4'
[ 0.720889] NET: Registered PF_INET6 protocol family
[ 0.721601] Segment Routing with IPv6
[ 0.721619] In-situ OAM (IOAM) with IPv6
[ 0.737764] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 0.738077] systemd[1]: Detected architecture x86-64.
[ 0.739470] systemd[1]: Hostname set to <kodi>.
[ 0.931002] systemd[1]: Queued start job for default target Graphical Interface.
[ 1.434543] tsc: Refined TSC clocksource calibration: 3900.224 MHz
[ 1.434549] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns
[ 1.434562] clocksource: Switched to clocksource tsc
[ 2.826543] random: crng init done
[ 2.828295] systemd[1]: Created slice Slice /system/getty.
[…]
```

I am going to be away from the system for a week, but maybe I find time to try to reproduce it in QEMU.

Kind regards,

Paul[ 0.000000] Linux version 5.18.0-rc6-00260-gf0589ee09bbb (root@4beb429beb4a) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #357 SMP PREEMPT_DYNAMIC Sun May 15 05:35:50 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00260-gf0589ee09bbb root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x142/0x210 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fe43fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fe44000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.16-955-g441b1ed6ba 05/15/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 5885661
[ 0.000000] tsc: Detected 3900.000 MHz processor
[ 0.000547] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000550] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000554] last_pfn = 0x17f000 max_arch_pfn = 0x400000000
[ 0.000689] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000898] last_pfn = 0x5fe44 max_arch_pfn = 0x400000000
[ 0.004692] Using GB pages for direct mapping
[ 0.004878] ACPI: Early table checksum verification disabled
[ 0.004882] ACPI: RSDP 0x00000000000F6830 000024 (v02 COREv4)
[ 0.004886] ACPI: XSDT 0x000000005FE4A0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004892] ACPI: FACP 0x000000005FE4BBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004898] ACPI: DSDT 0x000000005FE4A280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925)
[ 0.004901] ACPI: FACS 0x000000005FE4A240 000040
[ 0.004904] ACPI: FACS 0x000000005FE4A240 000040
[ 0.004906] ACPI: SSDT 0x000000005FE4BCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[ 0.004909] ACPI: MCFG 0x000000005FE4BD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004912] ACPI: APIC 0x000000005FE4BDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004915] ACPI: HPET 0x000000005FE4BE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004918] ACPI: HEST 0x000000005FE4BE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004921] ACPI: IVRS 0x000000005FE4C030 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.004924] ACPI: SSDT 0x000000005FE4C0A0 00051F (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.004927] ACPI: SSDT 0x000000005FE4C5C0 0006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.004930] ACPI: VFCT 0x000000005FE4CC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004932] ACPI: Reserving FACP table memory at [mem 0x5fe4bbc0-0x5fe4bcd3]
[ 0.004934] ACPI: Reserving DSDT table memory at [mem 0x5fe4a280-0x5fe4bbb9]
[ 0.004935] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f]
[ 0.004936] ACPI: Reserving FACS table memory at [mem 0x5fe4a240-0x5fe4a27f]
[ 0.004937] ACPI: Reserving SSDT table memory at [mem 0x5fe4bce0-0x5fe4bd69]
[ 0.004938] ACPI: Reserving MCFG table memory at [mem 0x5fe4bd70-0x5fe4bdab]
[ 0.004939] ACPI: Reserving APIC table memory at [mem 0x5fe4bdb0-0x5fe4be11]
[ 0.004940] ACPI: Reserving HPET table memory at [mem 0x5fe4be20-0x5fe4be57]
[ 0.004941] ACPI: Reserving HEST table memory at [mem 0x5fe4be60-0x5fe4c02f]
[ 0.004942] ACPI: Reserving IVRS table memory at [mem 0x5fe4c030-0x5fe4c09f]
[ 0.004943] ACPI: Reserving SSDT table memory at [mem 0x5fe4c0a0-0x5fe4c5be]
[ 0.004944] ACPI: Reserving SSDT table memory at [mem 0x5fe4c5c0-0x5fe4cc71]
[ 0.004945] ACPI: Reserving VFCT table memory at [mem 0x5fe4cc80-0x5fe5bee8]
[ 0.005002] No NUMA configuration found
[ 0.005003] Faking a node at [mem 0x0000000000000000-0x000000017effffff]
[ 0.005009] NODE_DATA(0) allocated [mem 0x17efe9000-0x17effffff]
[ 0.017179] Zone ranges:
[ 0.017181] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.017184] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.017185] Normal [mem 0x0000000100000000-0x000000017effffff]
[ 0.017187] Device empty
[ 0.017188] Movable zone start for each node
[ 0.017190] Early memory node ranges
[ 0.017190] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.017192] node 0: [mem 0x0000000000100000-0x000000005fe43fff]
[ 0.017193] node 0: [mem 0x0000000100000000-0x000000017effffff]
[ 0.017196] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff]
[ 0.017203] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.017260] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.030004] On node 0, zone Normal: 444 pages in unavailable ranges
[ 0.030071] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.030195] ACPI: PM-Timer IO Port: 0x818
[ 0.030202] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.030210] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.030214] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.030216] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.030219] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.030220] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.030226] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.030227] smpboot: smpboot: XXX end of prefill_possible_map
[ 0.030228] After prefill_possible_map
[ 0.030229] After init_cpu_to_node
[ 0.030230] After init_gi_nodes
[ 0.030232] After io_apic_init_mappings
[ 0.030233] After x86_init.hyper.guest_late_init
[ 0.030242] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.030243] After e820
[ 0.030245] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.034244] After unwind_init
[ 0.034245] After setup_arch
[ 0.034257] After setup_command_line
[ 0.034258] After setup_nr_cpu_ids
[ 0.034258] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.034726] percpu: Embedded 54 pages/cpu s183656 r8192 d29336 u1048576
[ 0.034741] pcpu-alloc: s183656 r8192 d29336 u1048576 alloc=1*2097152
[ 0.034744] pcpu-alloc: [0] 0 1
[ 0.034771] After setup_per_cpu_areas
[ 0.034772] After smp_perpare_boot_cpu
[ 0.034773] After boot_cpu_hotplug_init
[ 0.034776] Fallback order for Node 0: 0
[ 0.034779] Built 1 zonelists, mobility grouping on. Total pages: 898442
[ 0.034780] Policy zone: Normal
[ 0.034782] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00260-gf0589ee09bbb root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0
[ 0.034865] Unknown kernel command line parameters "noisapnp BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00260-gf0589ee09bbb", will be passed to user space.
[ 0.035660] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.036058] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.036087] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.076705] Memory: 3483292K/3651464K available (14343K kernel code, 2334K rwdata, 4284K rodata, 1700K init, 6316K bss, 167912K reserved, 0K cma-reserved)
[ 0.077163] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.077200] After mm_init
[ 0.077201] ftrace: allocating 35143 entries in 138 pages
[ 0.084300] ftrace: allocated 138 pages with 3 groups
[ 0.084419] Dynamic Preempt: full
[ 0.084421] After sched_init
[ 0.084494] rcu: Preemptible hierarchical RCU implementation.
[ 0.084495] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.084497] Trampoline variant of Tasks RCU enabled.
[ 0.084498] Rude variant of Tasks RCU enabled.
[ 0.084498] Tracing variant of Tasks RCU enabled.
[ 0.084499] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.084500] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.084512] After rcu_init
[ 0.093802] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.094070] After add_latent_entropy
[ 0.094073] After add_device_randomness
[ 0.094075] After boot_init_stack_canary
[ 0.094133] spurious 8259A interrupt: IRQ7.
[ 0.094157] Console: colour dummy device 80x25
[ 0.094168] printk: console [tty0] enabled
[ 0.094209] ACPI: Core revision 20211217
[ 0.094416] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.094432] APIC: Switch to symmetric I/O mode setup
[ 0.128937] APIC: Done
[ 0.128939] Before apic_bsb_setup
[ 0.129312] check_timer begin
[ 0.129313] check_timer after local_irq_disable
[ 0.129438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.146433] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706eb6a54e6, max_idle_ns: 881591026581 ns
[ 0.146443] Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.00 BogoMIPS (lpj=15600000)
[ 0.146446] pid_max: default: 32768 minimum: 301
[ 0.146556] LSM: Security Framework initializing
[ 0.146709] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.146726] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.147302] Bit 30 in CPUID ECX not set.
[ 0.147331] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.147333] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.147340] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.147342] Spectre V2 : Mitigation: Retpolines
[ 0.147342] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.147344] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.147346] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.148329] Freeing SMP alternatives memory: 40K
[ 0.148332] After check_bugs
[ 0.148334] After acpi_subsystem_init
[ 0.148334] After arch_post_acpi_subsys_init
[ 0.148336] After rcu_scheduler_starting
[ 0.148418] After find_task_by_pid_ns and PF_NO_SETAFFINITY
[ 0.148424] After numa_default_policy
[ 0.148452] After rcu_read_lock
[ 0.148453] After rcu_read_unlock
[ 0.148453] After kthreadd_done
[ 0.148464] smpboot: Start of smp_prepare_cpus_common
[ 0.148466] smpboot: smpboot: zalloc 0
[ 0.148467] smpboot: smpboot: zalloc 1
[ 0.148468] smpboot: smpboot: After set_sched_topology()
[ 0.148470] smpboot: smpboot: After smp_sanity_check()
[ 0.148471] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev()
[ 0.256482] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev()
[ 0.256484] smpboot: smp_get_logical_apicid()
[ 0.256484] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.256766] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.256769] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.256807] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.256845] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.256880] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.256885] ... version: 0
[ 0.256886] ... bit width: 48
[ 0.256887] ... generic registers: 6
[ 0.256887] ... value mask: 0000ffffffffffff
[ 0.256888] ... max period: 00007fffffffffff
[ 0.256889] ... fixed-purpose events: 0
[ 0.256890] ... event mask: 000000000000003f
[ 0.256990] rcu: Hierarchical SRCU implementation.
[ 0.257989] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.258091] smp: Bringing up secondary CPUs ...
[ 0.258326] x86: Booting SMP configuration:
[ 0.258327] .... node #0, CPUs: #1
[ 0.032375] Bit 30 in CPUID ECX not set.
[ 0.258456] After schedule_preempt_disabled
[ 0.258531] smp: Brought up 1 node, 2 CPUs
[ 0.258531] smpboot: Max logical packages: 1
[ 0.258531] smpboot: Total of 2 processors activated (15600.00 BogoMIPS)
[ 0.259063] devtmpfs: initialized
[ 0.259063] x86/mm: Memory block size: 128MB
[ 0.261055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.261055] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.261055] pinctrl core: initialized pinctrl subsystem
[ 0.262509] PM: RTC time: 13:01:30, date: 2022-05-15
[ 0.262952] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.263383] audit: initializing netlink subsys (disabled)
[ 0.263406] audit: type=2000 audit(1652619690.140:1): state=initialized audit_enabled=0 res=1
[ 0.263406] thermal_sys: Registered thermal governor 'fair_share'
[ 0.263406] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.263406] thermal_sys: Registered thermal governor 'step_wise'
[ 0.263406] thermal_sys: Registered thermal governor 'user_space'
[ 0.263406] cpuidle: using governor ladder
[ 0.263406] cpuidle: using governor menu
[ 0.263406] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.263406] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.263406] PCI: Using configuration type 1 for base access
[ 0.269951] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.269971] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.269971] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.270524] cryptd: max_cpu_qlen set to 1000
[ 0.270667] ACPI: Added _OSI(Module Device)
[ 0.270668] ACPI: Added _OSI(Processor Device)
[ 0.270669] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.270670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.270675] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.270679] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.270683] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.284564] ACPI: DSDT successfully acquired and loaded

[ 0.289668] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.293507] ACPI: Interpreter enabled
[ 0.293545] ACPI: PM: (supports S0 S1 S3 S5)
[ 0.293547] ACPI: Using IOAPIC for interrupt routing
[ 0.293634] HEST: Table parsing has been initialized.
[ 0.293678] GHES: Failed to enable APEI firmware first mode.
[ 0.293680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.294357] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.305766] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305781] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.306006] acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.306042] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.306261] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.310439] PCI host bridge to bus 0000:00
[ 0.310439] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.310439] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.310439] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff]
[ 0.310439] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.310439] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.310439] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.310439] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.310439] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[ 0.310439] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.310439] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff]
[ 0.310439] pci 0000:00:01.0: reg 0x18: [mem 0xf0180000-0xf01bffff]
[ 0.310439] pci 0000:00:01.0: enabling Extended Tags
[ 0.310439] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.310439] pci 0000:00:01.0: supports D1 D2
[ 0.310439] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.310439] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff]
[ 0.310439] pci 0000:00:01.1: enabling Extended Tags
[ 0.310439] pci 0000:00:01.1: supports D1 D2
[ 0.310439] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.310439] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417]
[ 0.310439] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423]
[ 0.310439] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f]
[ 0.310439] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427]
[ 0.310439] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f]
[ 0.310439] pci 0000:00:11.0: reg 0x24: [mem 0xf01cc000-0xf01cc7ff]
[ 0.310439] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.310439] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff]
[ 0.310439] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.310439] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff]
[ 0.310439] pci 0000:00:12.2: supports D1 D2
[ 0.310439] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.310439] pci 0000:00:12.2: pme_poll = true
[ 0.310439] pci 0000:00:12.2: after device_set_wakeup_capable()
[ 0.310439] pci 0000:00:12.2: after pci_pme_active()
[ 0.310439] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.310439] pci 0000:00:13.0: reg 0x10: [mem 0xf01c9000-0xf01c9fff]
[ 0.310439] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.310439] pci 0000:00:13.2: reg 0x10: [mem 0xf01ce000-0xf01ce0ff]
[ 0.310439] pci 0000:00:13.2: supports D1 D2
[ 0.310439] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.310439] pci 0000:00:13.2: pme_poll = true
[ 0.310439] pci 0000:00:13.2: after device_set_wakeup_capable()
[ 0.310439] pci 0000:00:13.2: after pci_pme_active()
[ 0.310439] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.310439] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.310439] pci 0000:00:14.2: reg 0x10: [mem 0xf01c4000-0xf01c7fff 64bit]
[ 0.310439] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.310439] pci 0000:00:14.2: pme_poll = true
[ 0.310439] pci 0000:00:14.2: after device_set_wakeup_capable()
[ 0.310439] pci 0000:00:14.2: after pci_pme_active()
[ 0.314572] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.315045] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.315416] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.315430] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff]
[ 0.315802] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.315830] pci 0000:00:15.0: enabling Extended Tags
[ 0.315879] pci 0000:00:15.0: supports D1 D2
[ 0.316284] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.316316] pci 0000:00:15.1: enabling Extended Tags
[ 0.316363] pci 0000:00:15.1: supports D1 D2
[ 0.316768] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.316797] pci 0000:00:15.2: enabling Extended Tags
[ 0.316844] pci 0000:00:15.2: supports D1 D2
[ 0.316994] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.317008] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff]
[ 0.317383] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.317396] pci 0000:00:16.2: reg 0x10: [mem 0xf01cf000-0xf01cf0ff]
[ 0.317468] pci 0000:00:16.2: supports D1 D2
[ 0.317469] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.317470] pci 0000:00:16.2: pme_poll = true
[ 0.317471] pci 0000:00:16.2: after device_set_wakeup_capable()
[ 0.317475] pci 0000:00:16.2: after pci_pme_active()
[ 0.317800] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.317931] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.318058] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.318187] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.318544] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.318676] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.318823] pci_bus 0000:01: extended config space not accessible
[ 0.318920] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.318931] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.318935] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.318939] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff] (subtractive decode)
[ 0.318943] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.319036] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.319160] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.319196] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit]
[ 0.319388] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.319390] pci 0000:03:00.0: pme_poll = true
[ 0.319391] pci 0000:03:00.0: after device_set_wakeup_capable()
[ 0.319396] pci 0000:03:00.0: after pci_pme_active()
[ 0.319435] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.330487] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.330499] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.330509] pci 0000:00:15.2: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.330677] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.330695] pci 0000:04:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 0.330716] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.330730] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.330847] pci 0000:04:00.0: supports D1 D2
[ 0.330849] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330850] pci 0000:04:00.0: pme_poll = true
[ 0.330851] pci 0000:04:00.0: after device_set_wakeup_capable()
[ 0.330855] pci 0000:04:00.0: after pci_pme_active()
[ 0.342492] pci 0000:00:15.2: PCI bridge to [bus 04-ff]
[ 0.342502] pci 0000:00:15.2: bridge window [io 0x0000-0x0fff]
[ 0.342505] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.342510] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.342514] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.343588] ACPI: PCI: Interrupt link INTA configured for IRQ 0
[ 0.343836] ACPI: PCI: Interrupt link INTB configured for IRQ 0
[ 0.344083] ACPI: PCI: Interrupt link INTC configured for IRQ 0
[ 0.344329] ACPI: PCI: Interrupt link INTD configured for IRQ 0
[ 0.344572] ACPI: PCI: Interrupt link INTE configured for IRQ 0
[ 0.344815] ACPI: PCI: Interrupt link INTF configured for IRQ 0
[ 0.345058] ACPI: PCI: Interrupt link INTG configured for IRQ 0
[ 0.345300] ACPI: PCI: Interrupt link INTH configured for IRQ 0
[ 0.345789] iommu: Default domain type: Translated
[ 0.345791] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.346239] SCSI subsystem initialized
[ 0.346267] libata version 3.00 loaded.
[ 0.346267] ACPI: bus type USB registered
[ 0.346267] usbcore: registered new interface driver usbfs
[ 0.346267] usbcore: registered new interface driver hub
[ 0.346267] usbcore: registered new device driver usb
[ 0.346922] PCI: Using ACPI for IRQ routing
[ 0.348489] PCI: pci_cache_line_size set to 64 bytes
[ 0.348541] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.348546] e820: reserve RAM buffer [mem 0x5fe44000-0x5fffffff]
[ 0.348549] e820: reserve RAM buffer [mem 0x17f000000-0x17fffffff]
[ 0.348597] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.348602] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.350544] clocksource: Switched to clocksource tsc-early
[ 0.392164] VFS: Disk quotas dquot_6.6.0
[ 0.392218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392450] pnp: PnP ACPI init
[ 0.393128] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.393983] pnp: PnP ACPI: found 2 devices
[ 0.404964] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.405201] NET: Registered PF_INET protocol family
[ 0.405346] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.406871] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.406894] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.406960] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.407061] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.407135] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.407161] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.407288] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.407330] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[ 0.407335] pci 0000:00:15.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.407340] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.407351] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.407358] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.407362] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.407373] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref]
[ 0.407386] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref]
[ 0.407398] pci 0000:04:00.0: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.407403] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.407405] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.407409] pci 0000:00:15.2: bridge window [mem 0x80000000-0x800fffff 64bit pref]
[ 0.407415] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407417] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.407419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.407420] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
[ 0.407422] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407423] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.407425] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.407426] pci_bus 0000:01: resource 7 [mem 0x80000000-0xffffffff]
[ 0.407428] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.407429] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.407430] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref]
[ 0.407624] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.408110] pci 0000:00:12.0: AMD USB device
[ 0.408138] pci 0000:00:12.0: AMD USB ohci handoff
[ 0.408873] pci 0000:00:12.2: AMD USB device
[ 0.408889] pci 0000:00:12.2: AMD USB ehci handoff
[ 0.409231] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.409623] pci 0000:00:13.0: AMD USB device
[ 0.409641] pci 0000:00:13.0: AMD USB ohci handoff
[ 0.410459] pci 0000:00:13.2: AMD USB device
[ 0.410480] pci 0000:00:13.2: AMD USB ehci handoff
[ 0.410820] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.411216] pci 0000:00:14.5: AMD USB device
[ 0.411233] pci 0000:00:14.5: AMD USB ohci handoff
[ 0.411982] pci 0000:00:16.0: AMD USB device
[ 0.411998] pci 0000:00:16.0: AMD USB ohci handoff
[ 0.412723] pci 0000:00:16.2: AMD USB device
[ 0.412738] pci 0000:00:16.2: AMD USB ehci handoff
[ 0.413080] pci 0000:00:16.2: PME# does not work under D3, disabling it
[ 0.413622] pci 0000:03:00.0: AMD USB xhci handoff
[ 0.413769] PCI: CLS 64 bytes, default 64
[ 0.413798] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround
[ 0.414374] pci 0000:00:01.0: Adding to iommu group 0
[ 0.414407] pci 0000:00:01.1: Adding to iommu group 0
[ 0.414456] pci 0000:00:11.0: Adding to iommu group 1
[ 0.414512] pci 0000:00:12.0: Adding to iommu group 2
[ 0.414544] pci 0000:00:12.2: Adding to iommu group 2
[ 0.414600] pci 0000:00:13.0: Adding to iommu group 3
[ 0.414631] pci 0000:00:13.2: Adding to iommu group 3
[ 0.414695] pci 0000:00:14.0: Adding to iommu group 4
[ 0.414727] pci 0000:00:14.2: Adding to iommu group 4
[ 0.414758] pci 0000:00:14.3: Adding to iommu group 4
[ 0.414808] pci 0000:00:14.4: Adding to iommu group 5
[ 0.414856] pci 0000:00:14.5: Adding to iommu group 6
[ 0.414918] pci 0000:00:15.0: Adding to iommu group 7
[ 0.414950] pci 0000:00:15.1: Adding to iommu group 7
[ 0.414981] pci 0000:00:15.2: Adding to iommu group 7
[ 0.415036] pci 0000:00:16.0: Adding to iommu group 8
[ 0.415068] pci 0000:00:16.2: Adding to iommu group 8
[ 0.415140] pci 0000:00:18.0: Adding to iommu group 9
[ 0.415172] pci 0000:00:18.1: Adding to iommu group 9
[ 0.415203] pci 0000:00:18.2: Adding to iommu group 9
[ 0.415235] pci 0000:00:18.3: Adding to iommu group 9
[ 0.415267] pci 0000:00:18.4: Adding to iommu group 9
[ 0.415299] pci 0000:00:18.5: Adding to iommu group 9
[ 0.415325] pci 0000:03:00.0: Adding to iommu group 7
[ 0.415350] pci 0000:04:00.0: Adding to iommu group 7
[ 0.421557] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.421562] AMD-Vi: Extended features (0x800000853): PreF PPR GT IA
[ 0.421567] AMD-Vi: Interrupt remapping enabled
[ 0.421865] software IO TLB: tearing down default memory pool
[ 0.423846] LVT offset 0 assigned for vector 0x400
[ 0.423905] perf: AMD IBS detected (0x000000ff)
[ 0.423916] amd_uncore: 4 amd_nb counters detected
[ 0.425685] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[ 0.434769] zbud: loaded
[ 0.436763] NET: Registered PF_ALG protocol family
[ 0.436773] Key type asymmetric registered
[ 0.436774] Asymmetric key parser 'x509' registered
[ 0.437180] alg: self-tests disabled
[ 0.437256] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.437314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.437364] io scheduler mq-deadline registered
[ 0.437365] io scheduler kyber registered
[ 0.438791] pcieport 0000:00:15.0: PME: Signaling with IRQ 25
[ 0.439108] pcieport 0000:00:15.1: PME: Signaling with IRQ 26
[ 0.439223] pcieport 0000:00:15.2: enabling device (0000 -> 0003)
[ 0.439758] pcieport 0000:00:15.2: PME: Signaling with IRQ 27
[ 0.440251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.440356] ACPI: button: Power Button [PWRF]
[ 0.440461] ACPI: \_SB_.P000: Found 2 idle states
[ 0.440739] ACPI: \_SB_.P001: Found 2 idle states
[ 0.443054] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.443058] ACPI: thermal: Thermal Zone [TZ00] (16 C)
[ 0.443608] Non-volatile memory driver v1.3
[ 0.443684] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.444128] ahci 0000:00:11.0: version 3.0
[ 0.444709] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode
[ 0.444714] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 0.448151] scsi host0: ahci
[ 0.448697] scsi host1: ahci
[ 0.449122] scsi host2: ahci
[ 0.449547] scsi host3: ahci
[ 0.450057] scsi host4: ahci
[ 0.450497] scsi host5: ahci
[ 0.450925] scsi host6: ahci
[ 0.451345] scsi host7: ahci
[ 0.451589] ata port1: DUMMY
[ 0.451591] ata port2: DUMMY
[ 0.451592] ata port3: DUMMY
[ 0.451594] ata port4: DUMMY
[ 0.451595] ata port5: DUMMY
[ 0.451596] ata port6: DUMMY
[ 0.451598] ata port7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19
[ 0.451600] ata port8: DUMMY
[ 0.451822] ACPI: bus type drm_connector registered
[ 0.452325] i8042: PNP: No PS/2 controller found.
[ 0.452325] i8042: Probing ports directly.
[ 0.454946] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.455054] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.455277] mousedev: PS/2 mouse device common for all mice
[ 0.455404] rtc_cmos 00:01: RTC can wake from S4
[ 0.455894] rtc_cmos 00:01: registered as rtc0
[ 0.455916] rtc_cmos 00:01: setting system clock to 2022-05-15T13:01:31 UTC (1652619691)
[ 0.455987] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 0.456120] device-mapper: uevent: version 1.0.3
[ 0.456332] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@xxxxxxxxxx
[ 0.456743] hid: raw HID events driver (C) Jiri Kosina
[ 0.456834] usbcore: registered new interface driver usbhid
[ 0.456836] usbhid: USB HID core driver
[ 0.456954] Initializing XFRM netlink socket
[ 0.456964] NET: Registered PF_PACKET protocol family
[ 0.456971] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 0.457377] microcode: CPU0: patch_level=0x0600111f
[ 0.457387] microcode: CPU1: patch_level=0x0600111f
[ 0.457478] microcode: Microcode Update Driver: v2.2.
[ 0.457482] IPI shorthand broadcast: enabled
[ 0.457494] AVX version of gcm_enc/dec engaged.
[ 0.457529] AES CTR mode by8 optimization enabled
[ 0.457982] sched_clock: Marking stable (429580718, 28375657)->(460705733, -2749358)
[ 0.458343] registered taskstats version 1
[ 0.458525] zswap: loaded using pool lzo/zbud
[ 0.458690] kmemleak: Kernel memory leak detector initialized (mem pool available: 15686)
[ 0.458692] kmemleak: Automatic memory scanning thread started
[ 0.458692] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.462934] ata link7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.463219] ata dev7.0: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 0.463224] ata dev7.0: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 0.463429] ata dev7.0: configured for UDMA/133
[ 0.463565] Key type encrypted registered
[ 0.463745] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 0.464560] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 0.464579] sd 6:0:0:0: [sda] Write Protect is off
[ 0.464584] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.464610] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.466272] sda: sda1 sda2 sda3
[ 0.466708] PM: Magic number: 6:460:28
[ 0.466960] sd 6:0:0:0: [sda] Attached SCSI disk
[ 0.476948] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[ 0.476992] VFS: Mounted root (ext4 filesystem) on device 8:3.
[ 0.479080] devtmpfs: mounted
[ 0.479096] After kernel_init_freeable
[ 0.482903] Freeing unused kernel image (initmem) memory: 1700K
[ 0.502098] Write protecting the kernel read-only data: 22528k
[ 0.502716] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.503228] Freeing unused kernel image (rodata/data gap) memory: 1860K
[ 0.543346] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.543352] rodata_test: all tests were successful
[ 0.543353] After mark_readonly
[ 0.543353] After pti_finalize
[ 0.543364] rcu_end_inkernel_boot
[ 0.543371] Run /sbin/init as init process
[ 0.543373] with arguments:
[ 0.543374] /sbin/init
[ 0.543375] noisapnp
[ 0.543376] with environment:
[ 0.543377] HOME=/
[ 0.543377] TERM=linux
[ 0.543378] BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00260-gf0589ee09bbb
[ 0.596298] random: fast init done
[ 0.707175] systemd[1]: Inserted module 'autofs4'
[ 0.719405] NET: Registered PF_INET6 protocol family
[ 0.720134] Segment Routing with IPv6
[ 0.720153] In-situ OAM (IOAM) with IPv6
[ 0.739076] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 0.739378] systemd[1]: Detected architecture x86-64.
[ 0.740749] systemd[1]: Hostname set to <kodi>.
[ 0.933071] systemd[1]: Queued start job for default target Graphical Interface.
[ 1.434445] tsc: Refined TSC clocksource calibration: 3900.224 MHz
[ 1.434453] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns
[ 1.434467] clocksource: Switched to clocksource tsc
[ 2.838446] random: crng init done
[ 2.840310] systemd[1]: Created slice Slice /system/getty.
[ 2.841251] systemd[1]: Created slice Slice /system/modprobe.
[ 2.841882] systemd[1]: Created slice User and Session Slice.
[ 2.842033] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.842138] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.842578] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.842621] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.842663] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.842706] systemd[1]: Reached target Path Units.
[ 2.842735] systemd[1]: Reached target Remote File Systems.
[ 2.842753] systemd[1]: Reached target Slice Units.
[ 2.842802] systemd[1]: Reached target Swaps.
[ 2.842840] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.843128] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.843266] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.843533] systemd[1]: Listening on Journal Audit Socket.
[ 2.843752] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.843974] systemd[1]: Listening on Journal Socket.
[ 2.844200] systemd[1]: Listening on Network Service Netlink Socket.
[ 2.844983] systemd[1]: Listening on udev Control Socket.
[ 2.845217] systemd[1]: Listening on udev Kernel Socket.
[ 2.847434] systemd[1]: Mounting Huge Pages File System...
[ 2.849879] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.852660] systemd[1]: Mounting Kernel Debug File System...
[ 2.855367] systemd[1]: Mounting Kernel Trace File System...
[ 2.858301] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.861243] systemd[1]: Starting Load Kernel Module configfs...
[ 2.865122] systemd[1]: Starting Load Kernel Module drm...
[ 2.868136] systemd[1]: Starting Load Kernel Module fuse...
[ 2.868245] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 2.868291] systemd[1]: Reached target Local File Systems.
[ 2.868388] systemd[1]: Load AppArmor profiles was skipped because of a failed condition check (ConditionSecurity=apparmor).
[ 2.872698] systemd[1]: Set Up Additional Binary Formats was skipped because all trigger condition checks failed.
[ 2.877901] fuse: init (API version 7.36)
[ 2.878019] systemd[1]: Starting Journal Service...
[ 2.878144] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 2.881156] systemd[1]: Starting Load/Save Random Seed...
[ 2.881312] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 2.884304] systemd[1]: Starting Apply Kernel Variables...
[ 2.887200] systemd[1]: Starting Create System Users...
[ 2.889983] systemd[1]: Starting Coldplug All udev Devices...
[ 2.915765] systemd[1]: Mounted Huge Pages File System.
[ 2.916015] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.916324] systemd[1]: Mounted Kernel Debug File System.
[ 2.916556] systemd[1]: Mounted Kernel Trace File System.
[ 2.916957] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.917568] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.917805] systemd[1]: Finished Load Kernel Module configfs.
[ 2.918677] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.919036] systemd[1]: Finished Load Kernel Module drm.
[ 2.919822] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.920145] systemd[1]: Finished Load Kernel Module fuse.
[ 2.920686] systemd[1]: Finished Load/Save Random Seed.
[ 2.921187] systemd[1]: Finished Apply Kernel Variables.
[ 2.921533] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 2.924620] systemd[1]: Mounting FUSE Control File System...
[ 2.928026] systemd[1]: Mounting Kernel Configuration File System...
[ 2.928110] systemd[1]: Store a System Token in an EFI Variable was skipped because of a failed condition check (ConditionPathExists=/sys/firmware/efi/efivars/LoaderFeatures-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 2.928207] systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id).
[ 2.932756] systemd[1]: Mounted FUSE Control File System.
[ 2.951792] systemd[1]: Finished Create System Users.
[ 2.953763] systemd[1]: Mounted Kernel Configuration File System.
[ 2.956810] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.000144] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.004901] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 3.032192] systemd[1]: Started Journal Service.
[ 3.045073] systemd-journald[135]: Received client request to flush runtime journal.
[ 3.214312] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.355960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.358021] ehci-pci: EHCI PCI platform driver
[ 3.358664] QUIRK: Enable AMD PLL fix
[ 3.358715] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.358746] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.358760] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.358768] ehci-pci 0000:00:12.2: debug port 1
[ 3.358937] ehci-pci 0000:00:12.2: irq 17, io mem 0xf01cd000
[ 3.374492] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.376892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 3.376898] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.376901] usb usb1: Product: EHCI Host Controller
[ 3.376902] usb usb1: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ehci_hcd
[ 3.376904] usb usb1: SerialNumber: 0000:00:12.2
[ 3.377457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.380106] ohci-pci: OHCI PCI platform driver
[ 3.380918] hub 1-0:1.0: USB hub found
[ 3.380949] hub 1-0:1.0: 5 ports detected
[ 3.383432] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.383439] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 3.386271] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 3.389006] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.389031] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.389045] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.389054] ehci-pci 0000:00:13.2: debug port 1
[ 3.389189] ehci-pci 0000:00:13.2: irq 17, io mem 0xf01ce000
[ 3.402606] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.406416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 3.406423] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.406425] usb usb2: Product: EHCI Host Controller
[ 3.406428] usb usb2: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ehci_hcd
[ 3.406430] usb usb2: SerialNumber: 0000:00:13.2
[ 3.409949] hub 2-0:1.0: USB hub found
[ 3.409980] hub 2-0:1.0: 5 ports detected
[ 3.413700] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 3.413723] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 3.413734] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.413743] ehci-pci 0000:00:16.2: debug port 1
[ 3.413874] ehci-pci 0000:00:16.2: irq 17, io mem 0xf01cf000
[ 3.426476] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.428302] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 3.428309] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.428312] usb usb3: Product: EHCI Host Controller
[ 3.428314] usb usb3: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ehci_hcd
[ 3.428315] usb usb3: SerialNumber: 0000:00:16.2
[ 3.429963] hub 3-0:1.0: USB hub found
[ 3.429998] hub 3-0:1.0: 4 ports detected
[ 3.439163] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 3.439188] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 3.439330] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000
[ 3.439331] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.439338] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.439354] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 3.439357] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 3.439430] ohci-pci 0000:00:12.0: irq 18, io mem 0xf01c8000
[ 3.439438] ohci-pci 0000:00:13.0: irq 18, io mem 0xf01c9000
[ 3.439446] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.439465] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 3.439545] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000
[ 3.484776] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 3.503365] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18
[ 3.503372] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.503374] usb usb5: Product: OHCI PCI host controller
[ 3.503376] usb usb5: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ohci_hcd
[ 3.503378] usb usb5: SerialNumber: 0000:00:12.0
[ 3.503831] hub 5-0:1.0: USB hub found
[ 3.503858] hub 5-0:1.0: 5 ports detected
[ 3.510947] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18
[ 3.510954] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.510956] usb usb7: Product: OHCI PCI host controller
[ 3.510959] usb usb7: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ohci_hcd
[ 3.510961] usb usb7: SerialNumber: 0000:00:14.5
[ 3.518593] hub 7-0:1.0: USB hub found
[ 3.518932] hub 7-0:1.0: 2 ports detected
[ 3.519675] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18
[ 3.519679] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.519682] usb usb6: Product: OHCI PCI host controller
[ 3.519684] usb usb6: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ohci_hcd
[ 3.519685] usb usb6: SerialNumber: 0000:00:13.0
[ 3.520138] hub 6-0:1.0: USB hub found
[ 3.520167] hub 6-0:1.0: 5 ports detected
[ 3.521117] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18
[ 3.521122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.521124] usb usb4: Product: OHCI PCI host controller
[ 3.521126] usb usb4: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb ohci_hcd
[ 3.521128] usb usb4: SerialNumber: 0000:00:16.0
[ 3.521580] hub 4-0:1.0: USB hub found
[ 3.521612] hub 4-0:1.0: 4 ports detected
[ 3.577866] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 3.577894] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 3.599614] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[ 3.620185] r8169 0000:04:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 28
[ 3.620194] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.653483] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 3.662521] fbcon: Taking over console
[ 3.663924] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 3.663931] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.663934] usb usb8: Product: xHCI Host Controller
[ 3.663936] usb usb8: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb xhci-hcd
[ 3.663938] usb usb8: SerialNumber: 0000:03:00.0
[ 3.672668] 1
[ 3.672720] 2
[ 3.673221] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 3.673231] 3
[ 3.673232] 4
[ 3.673233] 5
[ 3.673233] 7
[ 3.673239] 8
[ 3.673240] 9
[ 3.673894] 1
[ 3.673944] 2
[ 3.674687] 3
[ 3.674691] 4
[ 3.674692] 5
[ 3.674692] 7
[ 3.674695] 8
[ 3.674695] 9
[ 3.702140] [drm] radeon kernel modesetting enabled.
[ 3.707486] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[ 3.707802] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[ 3.708017] hub 8-0:1.0: USB hub found
[ 3.708736] hub 8-0:1.0: 2 ports detected
[ 3.715777] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1002:0x9996 0x00).
[ 3.715786] radeon 0000:00:01.0: vram limit (0) must be a power of 2
[ 3.715861] ATOM BIOS: 113
[ 3.715973] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 3.715976] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 3.715985] [drm] Detected VRAM RAM=512M, BAR=256M
[ 3.715986] [drm] RAM width 64bits DDR
[ 3.716091] [drm] radeon: 512M of VRAM memory ready
[ 3.716098] [drm] radeon: 1024M of GTT memory ready.
[ 3.716143] [drm] Loading ARUBA Microcode
[ 3.717526] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 3.717548] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 3.717562] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 3.717646] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.717779] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 3.717782] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.717785] usb usb9: Product: xHCI Host Controller
[ 3.717787] usb usb9: Manufacturer: Linux 5.18.0-rc6-00260-gf0589ee09bbb xhci-hcd
[ 3.717788] usb usb9: SerialNumber: 0000:03:00.0
[ 3.718372] hub 9-0:1.0: USB hub found
[ 3.718410] hub 9-0:1.0: 2 ports detected
[ 3.735170] [drm] Internal thermal controller without fan control
[ 3.735535] [drm] radeon: dpm initialized
[ 3.739155] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 3.739915] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 3.739921] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.739924] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.739927] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.739928] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.739930] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.739932] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.739934] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.739935] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.739937] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 3.761219] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 3.761569] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 3.773921] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3
[ 3.790274] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[ 3.791956] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 3.792317] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 3.792611] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 3.792910] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 3.793202] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 3.793491] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 3.800198] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 3.818428] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[ 3.822893] [drm] GART: Done restoring entries
[ 3.822898] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 3.823132] radeon 0000:00:01.0: WB enabled
[ 3.823135] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 3.823514] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 3.870469] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 3.872045] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
[ 3.872052] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
[ 3.872055] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
[ 3.872058] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
[ 3.872060] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 3.872062] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
[ 3.876238] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[ 3.876246] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2)
[ 3.878713] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 3.898895] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 3.899084] radeon 0000:00:01.0: radeon: using MSI.
[ 3.899151] [drm] radeon: irq initialized.
[ 3.932488] [drm] ring test on 0 succeeded in 3 usecs
[ 3.932500] [drm] ring test on 3 succeeded in 4 usecs
[ 3.932507] [drm] ring test on 4 succeeded in 4 usecs
[ 3.946622] [drm] ring test on 5 succeeded in 2 usecs
[ 3.948624] [drm] UVD initialized successfully.
[ 3.954225] r8169 0000:04:00.0 enp4s0: Link is Down
[ 4.058185] [drm] ring test on 6 succeeded in 18 usecs
[ 4.058200] [drm] ring test on 7 succeeded in 4 usecs
[ 4.058201] [drm] VCE initialized successfully.
[ 4.058374] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.058424] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.058477] [drm] ib test on ring 4 succeeded in 0 usecs
[ 4.074597] [drm] ib test on ring 5 succeeded
[ 4.090571] [drm] ib test on ring 6 succeeded in 1 usecs
[ 4.091600] usb 5-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 4.091606] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.091608] usb 5-1: Product: Dell QuietKey Keyboard
[ 4.091610] usb 5-1: Manufacturer: DELL
[ 4.099343] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:413C:2106.0001/input/input11
[ 4.106544] [drm] ib test on ring 7 succeeded in 1 usecs
[ 4.109099] [drm] Radeon Display Connectors
[ 4.109103] [drm] Connector 0:
[ 4.109105] [drm] DP-1
[ 4.109106] [drm] HPD1
[ 4.109107] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 4.109109] [drm] Encoders:
[ 4.109110] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.109111] [drm] Connector 1:
[ 4.109112] [drm] VGA-1
[ 4.109113] [drm] HPD2
[ 4.109114] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.109116] [drm] Encoders:
[ 4.109116] [drm] CRT1: INTERNAL_UNIPHY2
[ 4.109117] [drm] CRT1: NUTMEG
[ 4.109118] [drm] Connector 2:
[ 4.109119] [drm] HDMI-A-1
[ 4.109120] [drm] HPD3
[ 4.109121] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 4.109123] [drm] Encoders:
[ 4.109123] [drm] DFP2: INTERNAL_UNIPHY
[ 4.159161] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-1/input0
[ 4.389091] [drm] fb mappable at 0xE03E9000
[ 4.389097] [drm] vram apper at 0xE0000000
[ 4.389099] [drm] size 5242880
[ 4.389101] [drm] fb depth is 24
[ 4.389102] [drm] pitch is 5120
[ 4.389545] fbcon: radeondrmfb (fb0) is primary device
[ 4.579420] Console: switching to colour frame buffer device 160x64
[ 4.581477] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 4.594707] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 4.610702] usb 5-2: new low-speed USB device number 3 using ohci-pci
[ 4.712767] [drm] amdgpu kernel modesetting enabled.
[ 4.806602] usb 5-2: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 4.806608] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.806610] usb 5-2: Product: Optical USB Mouse
[ 4.806612] usb 5-2: Manufacturer: Logitech
[ 4.814718] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:046D:C016.0002/input/input12
[ 4.815620] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
[ 6.563885] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.563904] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 41.218751] systemd-journald[135]: Time jumped backwards, rotating.
[ 0.000000] Linux version 5.17.0-rc8-00254-g24544474c7a3 (root@45e877da5b3e) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #292 SMP PREEMPT Sat Mar 19 17:58:03 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0 apic=verbose
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x142/0x210 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fe45fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fe46000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.16-284-g1be475bd6f 03/19/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 5880767
[ 0.000000] tsc: Detected 3899.948 MHz processor
[ 0.000550] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000553] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000557] last_pfn = 0x17f000 max_arch_pfn = 0x400000000
[ 0.000697] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000903] last_pfn = 0x5fe46 max_arch_pfn = 0x400000000
[ 0.000909] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000922] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000932] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.004608] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.004632] Using GB pages for direct mapping
[ 0.004805] ACPI: Early table checksum verification disabled
[ 0.004808] ACPI: RSDP 0x00000000000F6830 000024 (v02 COREv4)
[ 0.004813] ACPI: XSDT 0x000000005FE4C0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004819] ACPI: FACP 0x000000005FE4DBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004825] ACPI: DSDT 0x000000005FE4C280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925)
[ 0.004829] ACPI: FACS 0x000000005FE4C240 000040
[ 0.004831] ACPI: FACS 0x000000005FE4C240 000040
[ 0.004834] ACPI: SSDT 0x000000005FE4DCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[ 0.004837] ACPI: MCFG 0x000000005FE4DD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004840] ACPI: APIC 0x000000005FE4DDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004843] ACPI: HPET 0x000000005FE4DE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004846] ACPI: HEST 0x000000005FE4DE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004849] ACPI: IVRS 0x000000005FE4E030 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.004852] ACPI: SSDT 0x000000005FE4E0A0 00051F (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.004855] ACPI: SSDT 0x000000005FE4E5C0 0006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.004858] ACPI: VFCT 0x000000005FE4EC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004861] ACPI: Reserving FACP table memory at [mem 0x5fe4dbc0-0x5fe4dcd3]
[ 0.004862] ACPI: Reserving DSDT table memory at [mem 0x5fe4c280-0x5fe4dbb9]
[ 0.004863] ACPI: Reserving FACS table memory at [mem 0x5fe4c240-0x5fe4c27f]
[ 0.004865] ACPI: Reserving FACS table memory at [mem 0x5fe4c240-0x5fe4c27f]
[ 0.004866] ACPI: Reserving SSDT table memory at [mem 0x5fe4dce0-0x5fe4dd69]
[ 0.004867] ACPI: Reserving MCFG table memory at [mem 0x5fe4dd70-0x5fe4ddab]
[ 0.004868] ACPI: Reserving APIC table memory at [mem 0x5fe4ddb0-0x5fe4de11]
[ 0.004869] ACPI: Reserving HPET table memory at [mem 0x5fe4de20-0x5fe4de57]
[ 0.004870] ACPI: Reserving HEST table memory at [mem 0x5fe4de60-0x5fe4e02f]
[ 0.004871] ACPI: Reserving IVRS table memory at [mem 0x5fe4e030-0x5fe4e09f]
[ 0.004872] ACPI: Reserving SSDT table memory at [mem 0x5fe4e0a0-0x5fe4e5be]
[ 0.004873] ACPI: Reserving SSDT table memory at [mem 0x5fe4e5c0-0x5fe4ec71]
[ 0.004874] ACPI: Reserving VFCT table memory at [mem 0x5fe4ec80-0x5fe5dee8]
[ 0.004883] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.004932] No NUMA configuration found
[ 0.004933] Faking a node at [mem 0x0000000000000000-0x000000017effffff]
[ 0.004939] NODE_DATA(0) allocated [mem 0x17efe9000-0x17effffff]
[ 0.017110] Zone ranges:
[ 0.017113] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.017115] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.017117] Normal [mem 0x0000000100000000-0x000000017effffff]
[ 0.017119] Device empty
[ 0.017120] Movable zone start for each node
[ 0.017121] Early memory node ranges
[ 0.017122] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.017123] node 0: [mem 0x0000000000100000-0x000000005fe45fff]
[ 0.017125] node 0: [mem 0x0000000100000000-0x000000017effffff]
[ 0.017127] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff]
[ 0.017135] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.017192] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.030079] On node 0, zone Normal: 442 pages in unavailable ranges
[ 0.030146] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.030269] ACPI: PM-Timer IO Port: 0x818
[ 0.030276] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.030284] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.030287] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.030289] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 4, APIC INT 02
[ 0.030291] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.030293] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 4, APIC INT 09
[ 0.030295] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 4, APIC INT 01
[ 0.030297] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 4, APIC INT 03
[ 0.030298] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 4, APIC INT 04
[ 0.030300] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 4, APIC INT 05
[ 0.030301] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 4, APIC INT 06
[ 0.030302] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 4, APIC INT 07
[ 0.030304] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 4, APIC INT 08
[ 0.030305] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 4, APIC INT 0a
[ 0.030307] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 4, APIC INT 0b
[ 0.030308] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 4, APIC INT 0c
[ 0.030309] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 4, APIC INT 0d
[ 0.030311] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 4, APIC INT 0e
[ 0.030312] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 4, APIC INT 0f
[ 0.030314] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.030316] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.030321] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.030322] smpboot: smpboot: XXX end of prefill_possible_map
[ 0.030323] After prefill_possible_map
[ 0.030324] After init_cpu_to_node
[ 0.030325] After init_gi_nodes
[ 0.030327] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.030328] After io_apic_init_mappings
[ 0.030329] After x86_init.hyper.guest_late_init
[ 0.030339] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.030341] After e820
[ 0.030343] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.034368] After unwind_init
[ 0.034369] After setup_arch
[ 0.034380] After setup_command_line
[ 0.034381] After setup_nr_cpu_ids
[ 0.034382] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.034842] percpu: Embedded 54 pages/cpu s182424 r8192 d30568 u1048576
[ 0.034858] pcpu-alloc: s182424 r8192 d30568 u1048576 alloc=1*2097152
[ 0.034861] pcpu-alloc: [0] 0 1
[ 0.034889] After setup_per_cpu_areas
[ 0.034890] After smp_perpare_boot_cpu
[ 0.034891] After boot_cpu_hotplug_init
[ 0.034894] Fallback order for Node 0: 0
[ 0.034897] Built 1 zonelists, mobility grouping on. Total pages: 898444
[ 0.034899] Policy zone: Normal
[ 0.034900] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0 apic=verbose
[ 0.034983] Unknown kernel command line parameters "noisapnp BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3", will be passed to user space.
[ 0.035777] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.036178] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.036206] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.076833] Memory: 3483300K/3651472K available (14343K kernel code, 2335K rwdata, 4292K rodata, 1700K init, 6272K bss, 167912K reserved, 0K cma-reserved)
[ 0.077261] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.077296] After mm_init
[ 0.077297] ftrace: allocating 35509 entries in 139 pages
[ 0.084407] ftrace: allocated 139 pages with 4 groups
[ 0.084524] Dynamic Preempt: full
[ 0.084525] After sched_init
[ 0.084595] rcu: Preemptible hierarchical RCU implementation.
[ 0.084596] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.084598] Trampoline variant of Tasks RCU enabled.
[ 0.084598] Rude variant of Tasks RCU enabled.
[ 0.084599] Tracing variant of Tasks RCU enabled.
[ 0.084600] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.084601] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.084611] After rcu_init
[ 0.093962] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.094338] random: crng_init_try_arch_early failed with i = 4, X86_FEATURE_RDRAND = no
[ 0.094341] random: crng_init_try_arch_early failed with i = 5, X86_FEATURE_RDRAND = no
[ 0.094342] random: crng_init_try_arch_early failed with i = 6, X86_FEATURE_RDRAND = no
[ 0.094343] random: crng_init_try_arch_early failed with i = 7, X86_FEATURE_RDRAND = no
[ 0.094344] random: crng_init_try_arch_early failed with i = 8, X86_FEATURE_RDRAND = no
[ 0.094345] random: crng_init_try_arch_early failed with i = 9, X86_FEATURE_RDRAND = no
[ 0.094346] random: crng_init_try_arch_early failed with i = 10, X86_FEATURE_RDRAND = no
[ 0.094346] random: crng_init_try_arch_early failed with i = 11, X86_FEATURE_RDRAND = no
[ 0.094347] random: crng_init_try_arch_early failed with i = 12, X86_FEATURE_RDRAND = no
[ 0.094348] random: crng_init_try_arch_early failed with i = 13, X86_FEATURE_RDRAND = no
[ 0.094349] random: crng_init_try_arch_early failed with i = 14, X86_FEATURE_RDRAND = no
[ 0.094350] random: crng_init_try_arch_early failed with i = 15, X86_FEATURE_RDRAND = no
[ 0.094351] After add_latent_entropy
[ 0.094353] After add_device_randomness
[ 0.094355] After boot_init_stack_canary
[ 0.094409] spurious 8259A interrupt: IRQ7.
[ 0.094432] Console: colour dummy device 80x25
[ 0.094444] printk: console [tty0] enabled
[ 0.094484] ACPI: Core revision 20211217
[ 0.094721] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.094738] APIC: Switch to symmetric I/O mode setup
[ 0.129240] APIC: Done
[ 0.129243] Before apic_bsb_setup
[ 0.129245] masked ExtINT on CPU#0
[ 0.129389] ENABLING IO-APIC IRQs
[ 0.129415] init IO_APIC IRQs
[ 0.129416] apic 4 pin 0 not connected
[ 0.129448] IOAPIC[0]: Preconfigured routing entry (4-1 -> IRQ 1 Level:0 ActiveLow:0)
[ 0.129472] IOAPIC[0]: Preconfigured routing entry (4-2 -> IRQ 0 Level:0 ActiveLow:0)
[ 0.129485] IOAPIC[0]: Preconfigured routing entry (4-3 -> IRQ 3 Level:0 ActiveLow:0)
[ 0.129498] IOAPIC[0]: Preconfigured routing entry (4-4 -> IRQ 4 Level:0 ActiveLow:0)
[ 0.129511] IOAPIC[0]: Preconfigured routing entry (4-5 -> IRQ 5 Level:0 ActiveLow:0)
[ 0.129523] IOAPIC[0]: Preconfigured routing entry (4-6 -> IRQ 6 Level:0 ActiveLow:0)
[ 0.129536] IOAPIC[0]: Preconfigured routing entry (4-7 -> IRQ 7 Level:0 ActiveLow:0)
[ 0.129551] IOAPIC[0]: Preconfigured routing entry (4-8 -> IRQ 8 Level:0 ActiveLow:0)
[ 0.129563] IOAPIC[0]: Preconfigured routing entry (4-9 -> IRQ 9 Level:1 ActiveLow:1)
[ 0.129575] IOAPIC[0]: Preconfigured routing entry (4-10 -> IRQ 10 Level:0 ActiveLow:0)
[ 0.129588] IOAPIC[0]: Preconfigured routing entry (4-11 -> IRQ 11 Level:0 ActiveLow:0)
[ 0.129601] IOAPIC[0]: Preconfigured routing entry (4-12 -> IRQ 12 Level:0 ActiveLow:0)
[ 0.129613] IOAPIC[0]: Preconfigured routing entry (4-13 -> IRQ 13 Level:0 ActiveLow:0)
[ 0.129626] IOAPIC[0]: Preconfigured routing entry (4-14 -> IRQ 14 Level:0 ActiveLow:0)
[ 0.129638] IOAPIC[0]: Preconfigured routing entry (4-15 -> IRQ 15 Level:0 ActiveLow:0)
[ 0.129640] apic 4 pin 16 not connected
[ 0.129641] apic 4 pin 17 not connected
[ 0.129642] apic 4 pin 18 not connected
[ 0.129642] apic 4 pin 19 not connected
[ 0.129643] apic 4 pin 20 not connected
[ 0.129643] apic 4 pin 21 not connected
[ 0.129644] apic 4 pin 22 not connected
[ 0.129645] apic 4 pin 23 not connected
[ 0.129646] check_timer begin
[ 0.129647] check_timer after local_irq_disable
[ 0.129877] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.134740] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706e53e385c, max_idle_ns: 881591184227 ns
[ 0.134749] Calibrating delay loop (skipped), value calculated using timer frequency.. 7799.89 BogoMIPS (lpj=3899948)
[ 0.134752] pid_max: default: 32768 minimum: 301
[ 0.134859] LSM: Security Framework initializing
[ 0.134973] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.134991] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.135552] Bit 30 in CPUID ECX not set.
[ 0.135580] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.135581] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.135588] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.135591] Spectre V2 : Mitigation: Retpolines
[ 0.135591] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.135593] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.135595] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.136603] Freeing SMP alternatives memory: 40K
[ 0.136607] After check_bugs
[ 0.136609] After acpi_subsystem_init
[ 0.136609] After arch_post_acpi_subsys_init
[ 0.136610] After rcu_scheduler_starting
[ 0.136689] After find_task_by_pid_ns and PF_NO_SETAFFINITY
[ 0.136694] After numa_default_policy
[ 0.136719] After rcu_read_lock
[ 0.136720] After rcu_read_unlock
[ 0.136721] After kthreadd_done
[ 0.136732] smpboot: Start of smp_prepare_cpus_common
[ 0.136734] smpboot: smpboot: zalloc 0
[ 0.136735] smpboot: smpboot: zalloc 1
[ 0.136735] smpboot: smpboot: After set_sched_topology()
[ 0.136737] smpboot: smpboot: After smp_sanity_check()
[ 0.136738] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev()
[ 0.136748] Using local APIC timer interrupts.
calibrating APIC timer ...
[ 0.136749] Before while loop, LAPIC_CAL_LOOPS = 100
[ 0.191744] random: random: 1
[ 0.191745] random: random: 2
[ 0.191746] random: random: 3
[ 0.191746] random: random: 4
[ 0.238752] ... lapic delta = 624992, lapic_cal_loops = 101
[ 0.238753] ... PM-Timer delta = 357929
[ 0.238753] ... PM-Timer result ok
[ 0.238754] ..... delta 624992
[ 0.238755] ..... mult: 26839250
[ 0.238755] ..... calibration result: 99998
[ 0.238756] ..... CPU clock speed is 3899.0947 MHz.
[ 0.238757] ..... host bus clock speed is 99.0998 MHz.
[ 0.238763] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev()
[ 0.238764] smpboot: smp_get_logical_apicid()
[ 0.238764] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.239007] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.239009] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.239045] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.239080] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.239113] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.239118] ... version: 0
[ 0.239119] ... bit width: 48
[ 0.239120] ... generic registers: 6
[ 0.239120] ... value mask: 0000ffffffffffff
[ 0.239121] ... max period: 00007fffffffffff
[ 0.239122] ... fixed-purpose events: 0
[ 0.239123] ... event mask: 000000000000003f
[ 0.239221] rcu: Hierarchical SRCU implementation.
[ 0.240173] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.240271] smp: Bringing up secondary CPUs ...
[ 0.240509] x86: Booting SMP configuration:
[ 0.240510] .... node #0, CPUs: #1
[ 0.034422] masked ExtINT on CPU#1
[ 0.034422] Bit 30 in CPUID ECX not set.
[ 0.240778] After schedule_preempt_disabled
[ 0.241757] smp: Brought up 1 node, 2 CPUs
[ 0.241760] smpboot: Max logical packages: 1
[ 0.241761] smpboot: Total of 2 processors activated (15599.79 BogoMIPS)
[ 0.242367] devtmpfs: initialized
[ 0.242367] x86/mm: Memory block size: 128MB
[ 0.244926] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.244935] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.245086] pinctrl core: initialized pinctrl subsystem
[ 0.245217] PM: RTC time: 18:26:20, date: 2022-03-19
[ 0.245518] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.245518] audit: initializing netlink subsys (disabled)
[ 0.245795] audit: type=2000 audit(1647714380.118:1): state=initialized audit_enabled=0 res=1
[ 0.246122] thermal_sys: Registered thermal governor 'fair_share'
[ 0.246123] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.246124] thermal_sys: Registered thermal governor 'step_wise'
[ 0.246125] thermal_sys: Registered thermal governor 'user_space'
[ 0.246147] cpuidle: using governor menu
[ 0.246917] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.246922] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.246955] PCI: Using configuration type 1 for base access
[ 0.252811] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.252851] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.252851] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.252874] cryptd: max_cpu_qlen set to 1000
[ 0.254028] ACPI: Added _OSI(Module Device)
[ 0.254032] ACPI: Added _OSI(Processor Device)
[ 0.254033] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.254035] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254041] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.254047] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.254052] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.267024] ACPI: DSDT successfully acquired and loaded

[ 0.272101] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.275595] ACPI: Interpreter enabled
[ 0.275595] ACPI: PM: (supports S0 S1 S3 S5)
[ 0.275595] ACPI: Using IOAPIC for interrupt routing
[ 0.275595] HEST: Table parsing has been initialized.
[ 0.275595] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.276930] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.291858] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.291872] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.292084] acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.292120] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.292333] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.292869] PCI host bridge to bus 0000:00
[ 0.292875] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.292882] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.292886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff]
[ 0.292890] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.292894] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.292932] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.293262] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.293416] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[ 0.293424] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.293429] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff]
[ 0.293433] pci 0000:00:01.0: reg 0x18: [mem 0xf0180000-0xf01bffff]
[ 0.293449] pci 0000:00:01.0: enabling Extended Tags
[ 0.293467] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.293486] pci 0000:00:01.0: supports D1 D2
[ 0.293622] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.293630] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff]
[ 0.293635] pci 0000:00:01.1: enabling Extended Tags
[ 0.293635] pci 0000:00:01.1: supports D1 D2
[ 0.293635] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.293635] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417]
[ 0.293635] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423]
[ 0.293635] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f]
[ 0.293635] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427]
[ 0.293635] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f]
[ 0.293635] pci 0000:00:11.0: reg 0x24: [mem 0xf01cc000-0xf01cc7ff]
[ 0.293635] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.293635] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff]
[ 0.293713] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.293726] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff]
[ 0.293802] pci 0000:00:12.2: supports D1 D2
[ 0.293804] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.293805] pci 0000:00:12.2: pme_poll = true
[ 0.293806] pci 0000:00:12.2: after device_set_wakeup_capable()
[ 0.293809] pci 0000:00:12.2: after pci_pme_active()
[ 0.294120] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.294134] pci 0000:00:13.0: reg 0x10: [mem 0xf01c9000-0xf01c9fff]
[ 0.294487] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.294500] pci 0000:00:13.2: reg 0x10: [mem 0xf01ce000-0xf01ce0ff]
[ 0.294570] pci 0000:00:13.2: supports D1 D2
[ 0.294571] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.294573] pci 0000:00:13.2: pme_poll = true
[ 0.294574] pci 0000:00:13.2: after device_set_wakeup_capable()
[ 0.294576] pci 0000:00:13.2: after pci_pme_active()
[ 0.294900] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.295242] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.295259] pci 0000:00:14.2: reg 0x10: [mem 0xf01c4000-0xf01c7fff 64bit]
[ 0.295319] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.295320] pci 0000:00:14.2: pme_poll = true
[ 0.295321] pci 0000:00:14.2: after device_set_wakeup_capable()
[ 0.295324] pci 0000:00:14.2: after pci_pme_active()
[ 0.295631] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.296007] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.296348] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.296362] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff]
[ 0.296720] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.296766] pci 0000:00:15.0: enabling Extended Tags
[ 0.297749] pci 0000:00:15.0: supports D1 D2
[ 0.297749] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.297749] pci 0000:00:15.1: enabling Extended Tags
[ 0.297749] pci 0000:00:15.1: supports D1 D2
[ 0.297749] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.297749] pci 0000:00:15.2: enabling Extended Tags
[ 0.297811] pci 0000:00:15.2: supports D1 D2
[ 0.297955] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.297969] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff]
[ 0.298325] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.298338] pci 0000:00:16.2: reg 0x10: [mem 0xf01cf000-0xf01cf0ff]
[ 0.298409] pci 0000:00:16.2: supports D1 D2
[ 0.298410] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.298412] pci 0000:00:16.2: pme_poll = true
[ 0.298412] pci 0000:00:16.2: after device_set_wakeup_capable()
[ 0.298415] pci 0000:00:16.2: after pci_pme_active()
[ 0.298728] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.298868] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.298992] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.299119] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.299413] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.299541] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.299680] pci_bus 0000:01: extended config space not accessible
[ 0.299781] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.299792] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.299795] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.299799] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff] (subtractive decode)
[ 0.299802] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.299891] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.300013] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.300049] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit]
[ 0.300238] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.300240] pci 0000:03:00.0: pme_poll = true
[ 0.300241] pci 0000:03:00.0: after device_set_wakeup_capable()
[ 0.300246] pci 0000:03:00.0: after pci_pme_active()
[ 0.300284] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.303814] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.303825] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.303834] pci 0000:00:15.2: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.304003] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.304021] pci 0000:04:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 0.304042] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.304056] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.304173] pci 0000:04:00.0: supports D1 D2
[ 0.304174] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304175] pci 0000:04:00.0: pme_poll = true
[ 0.304177] pci 0000:04:00.0: after device_set_wakeup_capable()
[ 0.304181] pci 0000:04:00.0: after pci_pme_active()
[ 0.307816] pci 0000:00:15.2: PCI bridge to [bus 04-ff]
[ 0.307826] pci 0000:00:15.2: bridge window [io 0x0000-0x0fff]
[ 0.307829] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.307834] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.307838] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.308924] ACPI: PCI: Interrupt link INTA configured for IRQ 0
[ 0.309161] ACPI: PCI: Interrupt link INTB configured for IRQ 0
[ 0.309396] ACPI: PCI: Interrupt link INTC configured for IRQ 0
[ 0.309629] ACPI: PCI: Interrupt link INTD configured for IRQ 0
[ 0.309873] ACPI: PCI: Interrupt link INTE configured for IRQ 0
[ 0.310112] ACPI: PCI: Interrupt link INTF configured for IRQ 0
[ 0.310348] ACPI: PCI: Interrupt link INTG configured for IRQ 0
[ 0.310580] ACPI: PCI: Interrupt link INTH configured for IRQ 0
[ 0.311067] iommu: Default domain type: Translated
[ 0.311069] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.311512] SCSI subsystem initialized
[ 0.311813] libata version 3.00 loaded.
[ 0.311877] ACPI: bus type USB registered
[ 0.311950] usbcore: registered new interface driver usbfs
[ 0.312775] usbcore: registered new interface driver hub
[ 0.312796] usbcore: registered new device driver usb
[ 0.313215] PCI: Using ACPI for IRQ routing
[ 0.315104] PCI: pci_cache_line_size set to 64 bytes
[ 0.315161] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.315169] e820: reserve RAM buffer [mem 0x5fe46000-0x5fffffff]
[ 0.315172] e820: reserve RAM buffer [mem 0x17f000000-0x17fffffff]
[ 0.315221] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.315226] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.316849] clocksource: Switched to clocksource tsc-early
[ 0.356769] VFS: Disk quotas dquot_6.6.0
[ 0.356821] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.357063] pnp: PnP ACPI init
[ 0.357728] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.358545] pnp: PnP ACPI: found 2 devices
[ 0.369133] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.369364] NET: Registered PF_INET protocol family
[ 0.369518] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.371040] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.371063] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.371159] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.371293] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.371376] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.371399] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.371549] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.371588] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[ 0.371593] pci 0000:00:15.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.371598] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.371609] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.371616] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.371620] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.371631] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref]
[ 0.371644] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref]
[ 0.371655] pci 0000:04:00.0: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.371660] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.371662] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.371667] pci 0000:00:15.2: bridge window [mem 0x80000000-0x800fffff 64bit pref]
[ 0.371673] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.371675] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.371676] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.371678] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
[ 0.371680] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.371681] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.371682] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.371684] pci_bus 0000:01: resource 7 [mem 0x80000000-0xffffffff]
[ 0.371685] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.371687] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.371688] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref]
[ 0.371869] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.372346] IOAPIC[0]: Preconfigured routing entry (4-18 -> IRQ 18 Level:1 ActiveLow:1)
[ 0.372353] pci 0000:00:12.0: AMD USB device
[ 0.372379] pci 0000:00:12.0: AMD USB ohci handoff
[ 0.373079] IOAPIC[0]: Preconfigured routing entry (4-17 -> IRQ 17 Level:1 ActiveLow:1)
[ 0.373093] pci 0000:00:12.2: AMD USB device
[ 0.373109] pci 0000:00:12.2: AMD USB ehci handoff
[ 0.373452] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.373819] IOAPIC[0]: Preconfigured routing entry (4-18 -> IRQ 18 Level:1 ActiveLow:1)
[ 0.373831] pci 0000:00:13.0: AMD USB device
[ 0.373849] pci 0000:00:13.0: AMD USB ohci handoff
[ 0.374543] IOAPIC[0]: Preconfigured routing entry (4-17 -> IRQ 17 Level:1 ActiveLow:1)
[ 0.374556] pci 0000:00:13.2: AMD USB device
[ 0.374571] pci 0000:00:13.2: AMD USB ehci handoff
[ 0.374904] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.375285] IOAPIC[0]: Preconfigured routing entry (4-18 -> IRQ 18 Level:1 ActiveLow:1)
[ 0.375297] pci 0000:00:14.5: AMD USB device
[ 0.375314] pci 0000:00:14.5: AMD USB ohci handoff
[ 0.376026] IOAPIC[0]: Preconfigured routing entry (4-18 -> IRQ 18 Level:1 ActiveLow:1)
[ 0.376038] pci 0000:00:16.0: AMD USB device
[ 0.376056] pci 0000:00:16.0: AMD USB ohci handoff
[ 0.376764] IOAPIC[0]: Preconfigured routing entry (4-17 -> IRQ 17 Level:1 ActiveLow:1)
[ 0.376778] pci 0000:00:16.2: AMD USB device
[ 0.376793] pci 0000:00:16.2: AMD USB ehci handoff
[ 0.377181] pci 0000:00:16.2: PME# does not work under D3, disabling it
[ 0.377636] IOAPIC[0]: Preconfigured routing entry (4-17 -> IRQ 17 Level:1 ActiveLow:1)
[ 0.377807] pci 0000:03:00.0: AMD USB xhci handoff
[ 0.377919] PCI: CLS 64 bytes, default 64
[ 0.377945] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround
[ 0.378454] IOAPIC[0]: Preconfigured routing entry (4-16 -> IRQ 16 Level:1 ActiveLow:1)
[ 0.378527] pci 0000:00:01.0: Adding to iommu group 0
[ 0.378558] pci 0000:00:01.1: Adding to iommu group 0
[ 0.378605] pci 0000:00:11.0: Adding to iommu group 1
[ 0.378658] pci 0000:00:12.0: Adding to iommu group 2
[ 0.378687] pci 0000:00:12.2: Adding to iommu group 2
[ 0.378740] pci 0000:00:13.0: Adding to iommu group 3
[ 0.378769] pci 0000:00:13.2: Adding to iommu group 3
[ 0.378827] pci 0000:00:14.0: Adding to iommu group 4
[ 0.378856] pci 0000:00:14.2: Adding to iommu group 4
[ 0.378885] pci 0000:00:14.3: Adding to iommu group 4
[ 0.378932] pci 0000:00:14.4: Adding to iommu group 5
[ 0.378977] pci 0000:00:14.5: Adding to iommu group 6
[ 0.379035] pci 0000:00:15.0: Adding to iommu group 7
[ 0.379071] pci 0000:00:15.1: Adding to iommu group 7
[ 0.379100] pci 0000:00:15.2: Adding to iommu group 7
[ 0.379155] pci 0000:00:16.0: Adding to iommu group 8
[ 0.379184] pci 0000:00:16.2: Adding to iommu group 8
[ 0.379253] pci 0000:00:18.0: Adding to iommu group 9
[ 0.379283] pci 0000:00:18.1: Adding to iommu group 9
[ 0.379312] pci 0000:00:18.2: Adding to iommu group 9
[ 0.379343] pci 0000:00:18.3: Adding to iommu group 9
[ 0.379373] pci 0000:00:18.4: Adding to iommu group 9
[ 0.379405] pci 0000:00:18.5: Adding to iommu group 9
[ 0.379428] pci 0000:03:00.0: Adding to iommu group 7
[ 0.379452] pci 0000:04:00.0: Adding to iommu group 7
[ 0.385432] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.385437] AMD-Vi: Extended features (0x800000853): PreF PPR GT IA
[ 0.385441] AMD-Vi: Interrupt remapping enabled
[ 0.385717] software IO TLB: tearing down default memory pool
[ 0.387636] LVT offset 0 assigned for vector 0x400
[ 0.387684] perf: AMD IBS detected (0x000000ff)
[ 0.387695] amd_uncore: 4 amd_nb counters detected
[ 0.389396] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[ 0.397908] zbud: loaded
[ 0.399802] NET: Registered PF_ALG protocol family
[ 0.399812] Key type asymmetric registered
[ 0.399814] Asymmetric key parser 'x509' registered
[ 0.400223] alg: self-tests disabled
[ 0.400305] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.400360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.400417] io scheduler mq-deadline registered
[ 0.400418] io scheduler kyber registered
[ 0.401722] pcieport 0000:00:15.0: PME: Signaling with IRQ 25
[ 0.402022] pcieport 0000:00:15.1: PME: Signaling with IRQ 26
[ 0.402163] pcieport 0000:00:15.2: enabling device (0000 -> 0003)
[ 0.402693] pcieport 0000:00:15.2: PME: Signaling with IRQ 27
[ 0.403173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.403279] ACPI: button: Power Button [PWRF]
[ 0.403385] ACPI: \_SB_.P000: Found 2 idle states
[ 0.403666] ACPI: \_SB_.P001: Found 2 idle states
[ 0.405853] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.405858] ACPI: thermal: Thermal Zone [TZ00] (14 C)
[ 0.405996] GHES: Failed to enable APEI firmware first mode.
[ 0.406488] Non-volatile memory driver v1.3
[ 0.406658] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.407082] ahci 0000:00:11.0: version 3.0
[ 0.407512] IOAPIC[0]: Preconfigured routing entry (4-19 -> IRQ 19 Level:1 ActiveLow:1)
[ 0.407656] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode
[ 0.407659] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 0.410411] scsi host0: ahci
[ 0.410924] scsi host1: ahci
[ 0.411356] scsi host2: ahci
[ 0.411769] scsi host3: ahci
[ 0.412194] scsi host4: ahci
[ 0.412620] scsi host5: ahci
[ 0.413024] scsi host6: ahci
[ 0.413453] scsi host7: ahci
[ 0.413693] ata1: DUMMY
[ 0.413694] ata2: DUMMY
[ 0.413695] ata3: DUMMY
[ 0.413695] ata4: DUMMY
[ 0.413696] ata5: DUMMY
[ 0.413697] ata6: DUMMY
[ 0.413699] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19
[ 0.413701] ata8: DUMMY
[ 0.413955] ACPI: bus type drm_connector registered
[ 0.414464] i8042: PNP: No PS/2 controller found.
[ 0.414465] i8042: Probing ports directly.
[ 0.416768] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.416863] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.417076] mousedev: PS/2 mouse device common for all mice
[ 0.417207] rtc_cmos 00:01: RTC can wake from S4
[ 0.417671] rtc_cmos 00:01: registered as rtc0
[ 0.417693] rtc_cmos 00:01: setting system clock to 2022-03-19T18:26:20 UTC (1647714380)
[ 0.417757] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 0.417882] device-mapper: uevent: version 1.0.3
[ 0.418079] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@xxxxxxxxxx
[ 0.418135] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.418415] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 0.418418] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 0.418624] ata7.00: configured for UDMA/133
[ 0.419018] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 0.419163] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.420576] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 0.420595] sd 6:0:0:0: [sda] Write Protect is off
[ 0.420600] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.420622] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.420721] fbcon: Deferring console take-over
[ 0.420723] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.420815] hid: raw HID events driver (C) Jiri Kosina
[ 0.420921] usbcore: registered new interface driver usbhid
[ 0.420923] usbhid: USB HID core driver
[ 0.421070] Initializing XFRM netlink socket
[ 0.421080] NET: Registered PF_PACKET protocol family
[ 0.421088] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 0.421718] microcode: CPU0: patch_level=0x0600111f
[ 0.421730] microcode: CPU1: patch_level=0x0600111f
[ 0.421829] microcode: Microcode Update Driver: v2.2.
[ 0.421834] IPI shorthand broadcast: enabled
[ 0.421844] ... APIC ID: 10000000 (10)
[ 0.421845] ... APIC VERSION: 80050010
[ 0.421847] 0000000000000000000000000000000000000000000000000000000000000000
[ 0.421852] 0000000000000000000000000000000000000000000000000000000000000000
[ 0.421856] 0000000000000000000000000000000000000000000000000000000000000000

[ 0.421861] number of MP IRQ sources: 15.
[ 0.421862] number of IO-APIC #4 registers: 24.
[ 0.421863] testing the IO APIC.......................
[ 0.421867] IO APIC #4......
[ 0.421868] .... register #00: 04000000
[ 0.421869] ....... : physical APIC id: 04
[ 0.421870] ....... : Delivery Type: 0
[ 0.421870] ....... : LTS : 0
[ 0.421871] .... register #01: 00178021
[ 0.421871] ....... : max redirection entries: 17
[ 0.421872] ....... : PRQ implemented: 1
[ 0.421873] ....... : IO APIC version: 21
[ 0.421873] .... register #02: 04000000
[ 0.421874] ....... : arbitration: 04
[ 0.421875] .... register #03: 04018021
[ 0.421875] ....... : Boot DT : 1
[ 0.421876] .... IRQ redirection table:
[ 0.421876] IOAPIC 0:
[ 0.421880] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421884] pin01, enabled , edge , high, V(01), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421887] pin02, enabled , edge , high, V(02), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421891] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421894] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421898] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421901] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421904] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421908] pin08, enabled , edge , high, V(08), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421911] pin09, enabled , level, low , V(09), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421914] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421918] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421921] pin0c, enabled , edge , high, V(0C), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421924] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421927] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421931] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421934] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421937] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421941] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421944] pin13, enabled , level, low , V(13), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421947] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421950] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421954] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421957] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.421958] IRQ to pin mappings:
[ 0.421960] IRQ0 -> 0:2
[ 0.421961] IRQ1 -> 0:1
[ 0.421963] IRQ3 -> 0:3
[ 0.421964] IRQ4 -> 0:4
[ 0.421966] IRQ5 -> 0:5
[ 0.421967] IRQ6 -> 0:6
[ 0.421969] IRQ7 -> 0:7
[ 0.421970] IRQ8 -> 0:8
[ 0.421971] IRQ9 -> 0:9
[ 0.421973] IRQ10 -> 0:10
[ 0.421974] IRQ11 -> 0:11
[ 0.421976] IRQ12 -> 0:12
[ 0.421977] IRQ13 -> 0:13
[ 0.421979] IRQ14 -> 0:14
[ 0.421980] IRQ15 -> 0:15
[ 0.421981] IRQ16 -> 0:16
[ 0.421983] IRQ17 -> 0:17
[ 0.421984] IRQ19 -> 0:19
[ 0.421986] .................................... done.
[ 0.422001] AVX version of gcm_enc/dec engaged.
[ 0.422031] AES CTR mode by8 optimization enabled
[ 0.422599] sched_clock: Marking stable (389148776, 33422154)->(424163152, -1592222)
[ 0.422651] sda: sda1 sda2 sda3
[ 0.423298] sd 6:0:0:0: [sda] Attached SCSI disk
[ 0.423300] registered taskstats version 1
[ 0.423515] zswap: loaded using pool lzo/zbud
[ 0.423712] kmemleak: Kernel memory leak detector initialized (mem pool available: 15686)
[ 0.423713] kmemleak: Automatic memory scanning thread started
[ 0.423714] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.428502] Key type encrypted registered
[ 0.431027] PM: Magic number: 14:692:443
[ 0.432427] random: random: 1
[ 0.432429] random: random: 2
[ 0.432430] random: random: 3
[ 0.432431] random: random: 4
[ 0.441406] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[ 0.441445] VFS: Mounted root (ext4 filesystem) on device 8:3.
[ 0.443271] devtmpfs: mounted
[ 0.443288] After kernel_init_freeable
[ 0.446628] Freeing unused kernel image (initmem) memory: 1700K
[ 0.455343] Write protecting the kernel read-only data: 22528k
[ 0.455955] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.456486] Freeing unused kernel image (rodata/data gap) memory: 1852K
[ 0.495855] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.495860] rodata_test: all tests were successful
[ 0.495860] After mark_readonly
[ 0.495861] After pti_finalize
[ 0.495874] rcu_end_inkernel_boot
[ 0.495882] Run /sbin/init as init process
[ 0.495883] with arguments:
[ 0.495884] /sbin/init
[ 0.495885] noisapnp
[ 0.495886] with environment:
[ 0.495887] HOME=/
[ 0.495887] TERM=linux
[ 0.495888] BOOT_IMAGE=/boot/vmlinuz-5.17.0-rc8-00254-g24544474c7a3
[ 0.508902] random: random: 1
[ 0.508906] random: random: 2
[ 0.508906] random: random: 3
[ 0.508907] random: random: 4
[ 0.535152] random: random: 1
[ 0.535155] random: random: 2
[ 0.535156] random: random: 3
[ 0.535157] random: random: 4
[ 0.535158] random: fast init done
[ 0.656129] systemd[1]: Inserted module 'autofs4'
[ 0.670092] NET: Registered PF_INET6 protocol family
[ 0.670798] Segment Routing with IPv6
[ 0.670817] In-situ OAM (IOAM) with IPv6
[ 0.688171] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 0.688462] systemd[1]: Detected architecture x86-64.
[ 0.689648] systemd[1]: Hostname set to <kodi>.
[ 0.882098] systemd[1]: Queued start job for default target Graphical Interface.
[ 0.882399] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.884599] systemd[1]: Created slice Slice /system/getty.
[ 0.884762] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.885584] systemd[1]: Created slice Slice /system/modprobe.
[ 0.885619] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.886910] systemd[1]: Created slice User and Session Slice.
[ 0.887084] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 0.887190] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 0.887586] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 0.887624] systemd[1]: Reached target Local Encrypted Volumes.
[ 0.887669] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 0.887717] systemd[1]: Reached target Path Units.
[ 0.887756] systemd[1]: Reached target Remote File Systems.
[ 0.887779] systemd[1]: Reached target Slice Units.
[ 0.887822] systemd[1]: Reached target Swaps.
[ 0.887868] systemd[1]: Reached target Local Verity Protected Volumes.
[ 0.888282] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 0.888409] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 0.888702] systemd[1]: Listening on Journal Audit Socket.
[ 0.888933] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.889198] systemd[1]: Listening on Journal Socket.
[ 0.889452] systemd[1]: Listening on Network Service Netlink Socket.
[ 0.890157] systemd[1]: Listening on udev Control Socket.
[ 0.890368] systemd[1]: Listening on udev Kernel Socket.
[ 0.892598] systemd[1]: Mounting Huge Pages File System...
[ 0.895078] systemd[1]: Mounting POSIX Message Queue File System...
[ 0.897735] systemd[1]: Mounting Kernel Debug File System...
[ 0.900379] systemd[1]: Mounting Kernel Trace File System...
[ 0.903430] systemd[1]: Starting Create List of Static Device Nodes...
[ 0.911804] systemd[1]: Starting Load Kernel Module configfs...
[ 0.914343] systemd[1]: Starting Load Kernel Module drm...
[ 0.916995] systemd[1]: Starting Load Kernel Module fuse...
[ 0.917103] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 0.917168] systemd[1]: Reached target Local File Systems.
[ 0.917261] systemd[1]: Load AppArmor profiles was skipped because of a failed condition check (ConditionSecurity=apparmor).
[ 0.918475] systemd[1]: Set Up Additional Binary Formats was skipped because all trigger condition checks failed.
[ 0.923068] systemd[1]: Starting Journal Service...
[ 0.923377] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 0.928393] fuse: init (API version 7.36)
[ 0.929515] systemd[1]: Starting Load/Save Random Seed...
[ 0.929666] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 0.932486] systemd[1]: Starting Apply Kernel Variables...
[ 0.935459] systemd[1]: Starting Create System Users...
[ 0.938288] systemd[1]: Starting Coldplug All udev Devices...
[ 0.957746] systemd[1]: Mounted Huge Pages File System.
[ 0.958678] systemd[1]: Mounted POSIX Message Queue File System.
[ 0.959287] systemd[1]: Mounted Kernel Debug File System.
[ 0.961365] systemd[1]: Mounted Kernel Trace File System.
[ 0.961861] systemd[1]: Finished Create List of Static Device Nodes.
[ 0.962643] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 0.963074] systemd[1]: Finished Load Kernel Module configfs.
[ 0.963827] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 0.964738] systemd[1]: Finished Load Kernel Module drm.
[ 0.965663] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 0.965938] systemd[1]: Finished Load Kernel Module fuse.
[ 0.966461] systemd[1]: Finished Apply Kernel Variables.
[ 0.971156] systemd[1]: Mounting FUSE Control File System...
[ 0.976535] systemd[1]: Mounting Kernel Configuration File System...
[ 0.977343] systemd[1]: Finished Create System Users.
[ 0.980350] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.990000] systemd[1]: Mounted FUSE Control File System.
[ 0.998545] systemd[1]: Mounted Kernel Configuration File System.
[ 1.019766] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.028151] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 1.081869] systemd[1]: Started Journal Service.
[ 1.094209] systemd-journald[134]: Received client request to flush runtime journal.
[ 1.288563] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.440771] tsc: Refined TSC clocksource calibration: 3900.223 MHz
[ 1.440779] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns
[ 1.440818] clocksource: Switched to clocksource tsc
[ 1.456053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.458306] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.458312] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 1.460635] ehci-pci: EHCI PCI platform driver
[ 1.461199] QUIRK: Enable AMD PLL fix
[ 1.461246] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.461278] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.461290] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.461299] ehci-pci 0000:00:12.2: debug port 1
[ 1.461427] ehci-pci 0000:00:12.2: irq 17, io mem 0xf01cd000
[ 1.465600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.467060] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.468195] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.471940] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 1.471948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.471950] usb usb1: Product: EHCI Host Controller
[ 1.471952] usb usb1: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ehci_hcd
[ 1.471954] usb usb1: SerialNumber: 0000:00:12.2
[ 1.474714] hub 1-0:1.0: USB hub found
[ 1.474756] hub 1-0:1.0: 5 ports detected
[ 1.475539] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.475560] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.475572] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.475581] ehci-pci 0000:00:13.2: debug port 1
[ 1.475662] ehci-pci 0000:00:13.2: irq 17, io mem 0xf01ce000
[ 1.481769] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.481993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 1.481997] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482000] usb usb2: Product: EHCI Host Controller
[ 1.482002] usb usb2: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ehci_hcd
[ 1.482003] usb usb2: SerialNumber: 0000:00:13.2
[ 1.482447] hub 2-0:1.0: USB hub found
[ 1.482476] hub 2-0:1.0: 5 ports detected
[ 1.483459] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.483482] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.483494] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.483503] ehci-pci 0000:00:16.2: debug port 1
[ 1.483587] ehci-pci 0000:00:16.2: irq 17, io mem 0xf01cf000
[ 1.489769] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.489998] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 1.490002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.490004] usb usb3: Product: EHCI Host Controller
[ 1.490006] usb usb3: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ehci_hcd
[ 1.490007] usb usb3: SerialNumber: 0000:00:16.2
[ 1.490448] hub 3-0:1.0: USB hub found
[ 1.490481] hub 3-0:1.0: 4 ports detected
[ 1.498328] ohci-pci: OHCI PCI platform driver
[ 1.498998] IOAPIC[0]: Preconfigured routing entry (4-18 -> IRQ 18 Level:1 ActiveLow:1)
[ 1.499052] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.499074] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.499206] ohci-pci 0000:00:12.0: irq 18, io mem 0xf01c8000
[ 1.502899] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.502929] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.503009] ohci-pci 0000:00:13.0: irq 18, io mem 0xf01c9000
[ 1.503702] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.503723] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.503891] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000
[ 1.511602] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.511627] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.511713] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000
[ 1.515038] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.562602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[ 1.562608] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.562611] usb usb6: Product: OHCI PCI host controller
[ 1.562613] usb usb6: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ohci_hcd
[ 1.562615] usb usb6: SerialNumber: 0000:00:14.5
[ 1.567171] hub 6-0:1.0: USB hub found
[ 1.567202] hub 6-0:1.0: 2 ports detected
[ 1.567857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[ 1.567862] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567864] usb usb5: Product: OHCI PCI host controller
[ 1.567866] usb usb5: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ohci_hcd
[ 1.567867] usb usb5: SerialNumber: 0000:00:13.0
[ 1.568311] hub 5-0:1.0: USB hub found
[ 1.568340] hub 5-0:1.0: 5 ports detected
[ 1.569267] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[ 1.569273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.569275] usb usb4: Product: OHCI PCI host controller
[ 1.569277] usb usb4: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ohci_hcd
[ 1.569279] usb usb4: SerialNumber: 0000:00:12.0
[ 1.569699] hub 4-0:1.0: USB hub found
[ 1.569729] hub 4-0:1.0: 5 ports detected
[ 1.570769] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[ 1.570775] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570777] usb usb7: Product: OHCI PCI host controller
[ 1.570779] usb usb7: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 ohci_hcd
[ 1.570781] usb usb7: SerialNumber: 0000:00:16.0
[ 1.571211] hub 7-0:1.0: USB hub found
[ 1.571239] hub 7-0:1.0: 4 ports detected
[ 1.605056] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[ 1.616355] 1
[ 1.616400] 2
[ 1.616911] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 1.616923] 3
[ 1.616924] 4
[ 1.616925] 5
[ 1.616925] 7
[ 1.616929] 8
[ 1.616929] 9
[ 1.616997] 1
[ 1.617036] 2
[ 1.617519] 3
[ 1.617523] 4
[ 1.617523] 5
[ 1.617524] 7
[ 1.617526] 8
[ 1.617526] 9
[ 1.618790] r8169 0000:04:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 28
[ 1.618797] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.621183] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.621205] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 1.656949] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[ 1.657261] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[ 1.661689] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 1.662486] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 1.662493] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.662496] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.662499] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 1.662500] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 1.662502] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 1.662503] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 1.662505] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 1.662507] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 1.662508] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 1.687177] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3
[ 1.687472] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[ 1.688854] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.697989] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 1.698348] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 1.698686] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 1.699214] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 1.699603] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 1.699959] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 1.700167] [drm] radeon kernel modesetting enabled.
[ 1.710682] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 1.710690] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.712174] usb usb8: Product: xHCI Host Controller
[ 1.712180] usb usb8: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 xhci-hcd
[ 1.712248] usb usb8: SerialNumber: 0000:03:00.0
[ 1.719300] hub 8-0:1.0: USB hub found
[ 1.720839] hub 8-0:1.0: 2 ports detected
[ 1.723384] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.723402] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 1.723413] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.723490] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.723617] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[ 1.723621] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.723623] usb usb9: Product: xHCI Host Controller
[ 1.723625] usb usb9: Manufacturer: Linux 5.17.0-rc8-00254-g24544474c7a3 xhci-hcd
[ 1.723627] usb usb9: SerialNumber: 0000:03:00.0
[ 1.729993] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1002:0x9996 0x00).
[ 1.730068] ATOM BIOS: 113
[ 1.730180] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.730185] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 1.730199] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.730202] [drm] RAM width 64bits DDR
[ 1.730319] [drm] radeon: 512M of VRAM memory ready
[ 1.730326] [drm] radeon: 1024M of GTT memory ready.
[ 1.730381] [drm] Loading ARUBA Microcode
[ 1.733339] hub 9-0:1.0: USB hub found
[ 1.733388] hub 9-0:1.0: 2 ports detected
[ 1.777845] [drm] Internal thermal controller without fan control
[ 1.778193] [drm] radeon: dpm initialized
[ 1.791880] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 1.791939] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.822030] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 1.863773] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 1.890929] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[ 1.900590] [drm] GART: Done restoring entries
[ 1.900598] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 1.901362] radeon 0000:00:01.0: WB enabled
[ 1.901368] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 1.909764] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 1.933344] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
[ 1.933352] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
[ 1.933354] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
[ 1.933356] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
[ 1.933358] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 1.933360] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
[ 1.933646] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 1.943666] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[ 1.943674] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2)
[ 1.943681] fbcon: Taking over console
[ 1.945219] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 1.946362] radeon 0000:00:01.0: radeon: using MSI.
[ 1.946511] [drm] radeon: irq initialized.
[ 1.967288] [drm] ring test on 0 succeeded in 3 usecs
[ 1.967298] [drm] ring test on 3 succeeded in 4 usecs
[ 1.967305] [drm] ring test on 4 succeeded in 3 usecs
[ 1.976139] r8169 0000:04:00.0 enp4s0: Link is Down
[ 1.981405] [drm] ring test on 5 succeeded in 2 usecs
[ 1.983422] [drm] UVD initialized successfully.
[ 2.029853] usb 4-1: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 2.029857] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.029860] usb 4-1: Product: Optical USB Mouse
[ 2.029862] usb 4-1: Manufacturer: Logitech
[ 2.037393] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:046D:C016.0001/input/input11
[ 2.038027] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-1/input0
[ 2.109345] [drm] ring test on 6 succeeded in 18 usecs
[ 2.109360] [drm] ring test on 7 succeeded in 3 usecs
[ 2.109361] [drm] VCE initialized successfully.
[ 2.109547] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.109599] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.109648] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.121768] [drm] ib test on ring 5 succeeded
[ 2.134773] [drm] ib test on ring 6 succeeded in 1 usecs
[ 2.145774] [drm] ib test on ring 7 succeeded in 1 usecs
[ 2.148053] [drm] Radeon Display Connectors
[ 2.148057] [drm] Connector 0:
[ 2.148058] [drm] DP-1
[ 2.148059] [drm] HPD1
[ 2.148059] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.148062] [drm] Encoders:
[ 2.148063] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.148064] [drm] Connector 1:
[ 2.148065] [drm] VGA-1
[ 2.148066] [drm] HPD2
[ 2.148066] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.148068] [drm] Encoders:
[ 2.148069] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.148070] [drm] CRT1: NUTMEG
[ 2.148071] [drm] Connector 2:
[ 2.148072] [drm] HDMI-A-1
[ 2.148072] [drm] HPD3
[ 2.148073] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.148075] [drm] Encoders:
[ 2.148075] [drm] DFP2: INTERNAL_UNIPHY
[ 2.279036] [drm] fb mappable at 0xE03E9000
[ 2.279040] [drm] vram apper at 0xE0000000
[ 2.279041] [drm] size 5242880
[ 2.279042] [drm] fb depth is 24
[ 2.279043] [drm] pitch is 5120
[ 2.279291] fbcon: radeondrmfb (fb0) is primary device
[ 2.289757] random: crng init done
[ 2.289760] random: 7 urandom warning(s) missed due to ratelimiting
[ 2.364936] Console: switching to colour frame buffer device 160x64
[ 2.370652] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 2.374013] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 2.505292] [drm] amdgpu kernel modesetting enabled.
[ 2.591837] usb 4-2: new low-speed USB device number 3 using ohci-pci
[ 2.756914] usb 4-2: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 2.756924] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.756928] usb 4-2: Product: Dell QuietKey Keyboard
[ 2.756932] usb 4-2: Manufacturer: DELL
[ 2.766116] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:413C:2106.0002/input/input12
[ 2.820325] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-2/input0
[ 4.622261] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 4.622280] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready

Next message: Steven Rostedt: "Re: [PATCH mm] tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate"
Previous message: Steven Rostedt: "Re: [PATCH mm v2] tracing: incorrect gfp_t conversion"
Next in thread: Jason A. Donenfeld: "Re: 2 s boot time regression between 5.17 and 5.18-rc4?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]