Re: [PATCH 04/49] iio: fix opencoded for_each_set_bit()

From: Jonathan Cameron
Date: Sat Jun 04 2022 - 11:32:35 EST


On Fri, 11 Feb 2022 18:17:37 +0100
Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> wrote:

> Le 10/02/2022 à 23:48, Yury Norov a écrit :
> > iio_simple_dummy_trigger_h() is mostly an opencoded for_each_set_bit().
> > Using for_each_set_bit() make code much cleaner, and more effective.
> >
> > Signed-off-by: Yury Norov <yury.norov-Re5JQEeQqe8AvxtiuMwx3w@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/iio/dummy/iio_simple_dummy_buffer.c | 48 ++++++++-------------
> > 1 file changed, 19 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/iio/dummy/iio_simple_dummy_buffer.c b/drivers/iio/dummy/iio_simple_dummy_buffer.c
> > index d81c2b2dad82..3bc1b7529e2a 100644
> > --- a/drivers/iio/dummy/iio_simple_dummy_buffer.c
> > +++ b/drivers/iio/dummy/iio_simple_dummy_buffer.c
> > @@ -45,41 +45,31 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
> > {
> > struct iio_poll_func *pf = p;
> > struct iio_dev *indio_dev = pf->indio_dev;
> > + int i = 0, j;
> > u16 *data;
> >
> > data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> > if (!data)
> > goto done;
> >
> > - if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) {
> > - /*
> > - * Three common options here:
> > - * hardware scans: certain combinations of channels make
> > - * up a fast read. The capture will consist of all of them.
> > - * Hence we just call the grab data function and fill the
> > - * buffer without processing.
> > - * software scans: can be considered to be random access
> > - * so efficient reading is just a case of minimal bus
> > - * transactions.
> > - * software culled hardware scans:
> > - * occasionally a driver may process the nearest hardware
> > - * scan to avoid storing elements that are not desired. This
> > - * is the fiddliest option by far.
> > - * Here let's pretend we have random access. And the values are
> > - * in the constant table fakedata.
> > - */
> > - int i, j;
> > -
> > - for (i = 0, j = 0;
> > - i < bitmap_weight(indio_dev->active_scan_mask,
> > - indio_dev->masklength);
> > - i++, j++) {
> > - j = find_next_bit(indio_dev->active_scan_mask,
> > - indio_dev->masklength, j);
> > - /* random access read from the 'device' */
> > - data[i] = fakedata[j];
> > - }
> > - }
> > + /*
> > + * Three common options here:
> > + * hardware scans: certain combinations of channels make
> > + * up a fast read. The capture will consist of all of them.
> > + * Hence we just call the grab data function and fill the
> > + * buffer without processing.
> > + * software scans: can be considered to be random access
> > + * so efficient reading is just a case of minimal bus
> > + * transactions.
> > + * software culled hardware scans:
> > + * occasionally a driver may process the nearest hardware
> > + * scan to avoid storing elements that are not desired. This
> > + * is the fiddliest option by far.
> > + * Here let's pretend we have random access. And the values are
> > + * in the constant table fakedata.
> > + */
>
> Nitpicking: you could take advantage of the tab you save to use the full
> width of the line and save some lines of code.

Tweaked whilst applying.

Sorry this one took so long. I marked it as a patch that I'd revisit if and
tidy up if there was no v2 sent, but then managed to forget about it until
I came to do a clean out of patchwork today.

Anyhow, now applied to the togreg branch of iio.git - initially pushed out
as testing for 0-day to see if we missed anything.

Thanks,

Jonathan

>
> Just my 2c.
>
> CJ
>
>
> > + for_each_set_bit(j, indio_dev->active_scan_mask, indio_dev->masklength)
> > + data[i++] = fakedata[j];
> >
> > iio_push_to_buffers_with_timestamp(indio_dev, data,
> > iio_get_time_ns(indio_dev));
>