Re: linux-next: build warnings after merge of the hwmon-staging tree

[Bagas Sanjaya]

On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
> 
> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
> Text in column margin in table line 33.
> 
> ======================  ====================================
> curr[1-2]_label         "iin[12]"
> curr[1-2]_input         Measured input current
> curr[1-2]_max           Maximum input current
> curr[1-2]_max_alarm     Current high alarm
> 
> curr[3-4]_label         "iout[1-2]"
> curr[3-4]_input         Measured output current
> curr[3-4]_highest       Highest measured output current
> curr[3-4]_max           Maximum output current
> curr[3-4]_max_alarm     Output current high alarm
> 
> in[1-2]_label           "vin[12]"
> in[1-2]_input           Measured input voltage
> in[1-2]_highest         Highest measured input voltage
> in[1-2]_crit            Critical maximum input voltage
> in[1-2]_crit_alarm      Input voltage critical high alarm
> in[1-2]_min             Minimum input voltage
> in[1-2]_min_alarm       Input voltage low alarm
> in[1-2]_rated_min       Rated minimum input voltage
> in[1-2]_rated_max       Rated maximum input voltage
> in1_reset_history       Write to reset history for all attributes
> 
> in[3-5]_label           "vmon[1-3]"
> in[3-5]_input           Measured voltage on ITH1/ITH2/EXTVCC pins
>                         Only available if enabled with MFR_ADC_CONTROL_LT7182S
>                         command.
> 
> in[3-4|6-7]_label       "vout[1-2]"
> in[3-4|6-7]_input       Measured output voltage
> in[3-4|6-7]_highest     Highest measured output voltage
> in[3-4|6-7]_lcrit       Critical minimum output voltage
> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
> in[3-4|6-7]_min         Minimum output voltage
> in[3-4|6-7]_max_alarm   Output voltage low alarm
> in[3-4|6-7]_max         Maximum output voltage
> in[3-4|6-7]_max_alarm   Output voltage high alarm
> in[3-4|6-7]_crit        Critical maximum output voltage
> in[3-4|6-7]_crit_alarm  Output voltage critical high alarm
> 
> power[1-2]_label        "pout[1-2]"
> power[1-2]_input        Measured output power
> 
> temp1_input             Measured temperature
> temp1_crit              Critical high temperature
> temp1_crit_alarm        Chip temperature critical high alarm
> temp1_max               Maximum temperature
> temp1_max_alarm         Chip temperature high alarm
> ======================  ====================================
> 
> Introduced by commit
> 
>   3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
> 

Hi Stephen,

The warning above doesn't appear when doing htmldocs build using Sphinx
installed from pip on my system.

Cc-ing linux-doc list.

-- 
An old man doll... just what I always wanted! - Clara