[PATCH V2 1/2] dt-bindings: display: xlnx: Add DSI 2.0 Tx subsystem documentation

[Venkateshwar Rao Gannavarapu]

This patch adds dt binding for Xilinx DSI-TX subsystem.

The Xilinx MIPI DSI (Display serial interface) Transmitter Subsystem
implements the Mobile Industry Processor Interface (MIPI) based display
interface. It supports the interface with the programmable logic (FPGA).

Signed-off-by: Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xxxxxxxxxx>
---
 .../bindings/display/xlnx/xlnx,dsi-tx.yaml         | 101 +++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml

diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml
new file mode 100644
index 0000000..644934d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,dsi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx DSI Transmitter subsystem Device Tree Bindings
+
+maintainers:
+  - Venkateshwar Rao Gannavarapu <venkateshwar.rao.gannavarapu@xxxxxxxxxx>
+
+description: |
+  The Xilinx DSI Transmitter Subsystem implements the Mobile Industry
+  Processor Interface based display interface. It supports the interface
+  with the programmable logic (FPGA).
+
+  For more details refer to PG238 Xilinx MIPI DSI-V2.0 Tx Subsystem.
+
+properties:
+  compatible:
+    const: xlnx,dsi-tx-v2.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AXI Lite CPU clock
+      - description: D-PHY clock
+
+  clock-names:
+    items:
+      - const: s_axis_aclk
+      - const: dphy_clk_200M
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          This port should be the input endpoint.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          This port should be the output endpoint.
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi0: dsi_tx@80020000 {
+        compatible = "xlnx,dsi-tx-v2.0";
+        reg = <0x80020000 0x20000>;
+        clocks = <&misc_clk_0>, <&misc_clk_1>;
+        clock-names = "s_axis_aclk", "dphy_clk_200M";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                    reg = <0>;
+                    mipi_dsi_in: endpoint {
+                        remote-endpoint = <&pl_disp>;
+                    };
+              };
+
+              port@1 {
+                    reg = <1>;
+                    mipi_dsi_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+              };
+        };
+
+        panel@0 {
+              compatible = "auo,b101uan01";
+              reg = <0>;
+              port {
+                    panel_in: endpoint {
+                        remote-endpoint = <&mipi_dsi_out>;
+                    };
+              };
+        };
+    };
+
+...
--
1.8.3.1