Re: [PATCH v1] arm64: dts: imx8mm-verdin: update CAN clock to 40MHz

[Francesco Dolcini]

Hello Shawn, just a ping on this.

Francesco

On Thu, May 12, 2022 at 12:40:19PM +0200, Andrejs Cainikovs wrote:
> Update SPI CAN controller clock to match current hardware design.
> 
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> index 0d84d29e70f1..d309bc0ab8f6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> @@ -32,10 +32,10 @@ backlight: backlight {
>  	};
>  
>  	/* Fixed clock dedicated to SPI CAN controller */
> -	clk20m: oscillator {
> +	clk40m: oscillator {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> -		clock-frequency = <20000000>;
> +		clock-frequency = <40000000>;
>  	};
>  
>  	gpio-keys {
> @@ -194,7 +194,7 @@ &ecspi3 {
>  
>  	can1: can@0 {
>  		compatible = "microchip,mcp251xfd";
> -		clocks = <&clk20m>;
> +		clocks = <&clk40m>;
>  		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_can1_int>;
> -- 
> 2.34.1
>