Re: [PATCH v1] arm64: dts: imx8mm-verdin: update CAN clock to 40MHz

[Marc Kleine-Budde]

On 21.06.2022 20:07:49, Francesco Dolcini wrote:
> Hello Shawn, just a ping on this.
> 
> Francesco
> 
> On Thu, May 12, 2022 at 12:40:19PM +0200, Andrejs Cainikovs wrote:
> > Update SPI CAN controller clock to match current hardware design.
> > 
> > Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> > index 0d84d29e70f1..d309bc0ab8f6 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> > @@ -32,10 +32,10 @@ backlight: backlight {
> >  	};
> >  
> >  	/* Fixed clock dedicated to SPI CAN controller */
> > -	clk20m: oscillator {
> > +	clk40m: oscillator {
> >  		compatible = "fixed-clock";
> >  		#clock-cells = <0>;
> > -		clock-frequency = <20000000>;
> > +		clock-frequency = <40000000>;
> >  	};
> >  
> >  	gpio-keys {
> > @@ -194,7 +194,7 @@ &ecspi3 {
> >  
> >  	can1: can@0 {
> >  		compatible = "microchip,mcp251xfd";
> > -		clocks = <&clk20m>;
> > +		clocks = <&clk40m>;
> >  		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;

You don't want to use an edge triggered interrupt with the mcp251xfd
chip. You will be losing interrupts, better use IRQ_TYPE_LEVEL_LOW.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: PGP signature