Re: [PATCH v4 07/15] regulator: axp20x: Add support for AXP192

From: Andy Shevchenko
Date: Thu Jun 30 2022 - 03:59:12 EST

On Wed, Jun 29, 2022 at 4:29 PM Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
> Add support for the AXP192 PMIC.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Acked-by: Mark Brown <broonie@xxxxxxxxxx>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> ---
> drivers/regulator/axp20x-regulator.c | 100 ++++++++++++++++++++++++---
> 1 file changed, 91 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index d260c442b788..ee79a9ed0249 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -27,6 +27,29 @@
> #include <linux/regulator/machine.h>
> #include <linux/regulator/of_regulator.h>
>
> +#define AXP192_GPIO0_FUNC_MASK GENMASK(2, 0)
> +
> +#define AXP192_IO_ENABLED 0x02
> +#define AXP192_IO_DISABLED 0x06
> +
> +#define AXP192_WORKMODE_DCDC1_MASK BIT_MASK(3)
> +#define AXP192_WORKMODE_DCDC2_MASK BIT_MASK(2)
> +#define AXP192_WORKMODE_DCDC3_MASK BIT_MASK(1)
> +
> +#define AXP192_DCDC1_V_OUT_MASK GENMASK(6, 0)
> +#define AXP192_DCDC2_V_OUT_MASK GENMASK(5, 0)
> +#define AXP192_DCDC3_V_OUT_MASK GENMASK(6, 0)
> +#define AXP192_LDO2_V_OUT_MASK GENMASK(7, 4)
> +#define AXP192_LDO3_V_OUT_MASK GENMASK(3, 0)
> +#define AXP192_LDO_IO0_V_OUT_MASK GENMASK(7, 4)
> +
> +#define AXP192_PWR_OUT_EXTEN_MASK BIT_MASK(6)
> +#define AXP192_PWR_OUT_DCDC2_MASK BIT_MASK(4)
> +#define AXP192_PWR_OUT_LDO3_MASK BIT_MASK(3)
> +#define AXP192_PWR_OUT_LDO2_MASK BIT_MASK(2)
> +#define AXP192_PWR_OUT_DCDC3_MASK BIT_MASK(1)
> +#define AXP192_PWR_OUT_DCDC1_MASK BIT_MASK(0)
> +
> #define AXP20X_GPIO0_FUNC_MASK GENMASK(3, 0)
> #define AXP20X_GPIO1_FUNC_MASK GENMASK(3, 0)
>
> @@ -375,25 +398,32 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
>
> switch (axp20x->variant) {
> case AXP209_ID:
> - if (id == AXP20X_DCDC2) {
> + if (id == AXP20X_LDO3) {
> slew_rates = axp209_dcdc2_ldo3_slew_rates;
> rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates);
> reg = AXP20X_DCDC2_LDO3_V_RAMP;
> - mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK |
> - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK;
> + mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK |
> + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK;
> enable = (ramp > 0) ?
> - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0;
> + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0;
> break;
> }
>
> - if (id == AXP20X_LDO3) {
> + fallthrough;
> +
> + case AXP192_ID:
> + /*
> + * AXP192 and AXP209 share the same DCDC2 ramp configuration
> + */
> + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) ||
> + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2)) {
> slew_rates = axp209_dcdc2_ldo3_slew_rates;
> rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates);
> reg = AXP20X_DCDC2_LDO3_V_RAMP;
> - mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK |
> - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK;
> + mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK |
> + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK;
> enable = (ramp > 0) ?
> - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0;
> + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0;
> break;
> }
>
> @@ -415,7 +445,8 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
> if (ramp > slew_rates[i])
> break;
>
> - if (id == AXP20X_DCDC2)
> + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) ||
> + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2))
> cfg = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE(i);
> else
> cfg = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE(i);
> @@ -511,6 +542,29 @@ static const struct regulator_ops axp20x_ops_sw = {
> .is_enabled = regulator_is_enabled_regmap,
> };
>
> +static const struct regulator_desc axp192_regulators[] = {
> + AXP_DESC(AXP192, DCDC1, "dcdc1", "vin1", 700, 3500, 25,
> + AXP192_DCDC1_V_OUT, AXP192_DCDC1_V_OUT_MASK,
> + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC1_MASK),
> + AXP_DESC(AXP192, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
> + AXP192_DCDC2_V_OUT, AXP192_DCDC2_V_OUT_MASK,
> + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC2_MASK),
> + AXP_DESC(AXP192, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
> + AXP192_DCDC3_V_OUT, AXP192_DCDC3_V_OUT_MASK,
> + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC3_MASK),
> + AXP_DESC_FIXED(AXP192, LDO1, "ldo1", "acin", 1250),
> + AXP_DESC(AXP192, LDO2, "ldo2", "ldoin", 1800, 3300, 100,
> + AXP192_LDO2_3_V_OUT, AXP192_LDO2_V_OUT_MASK,
> + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO2_MASK),
> + AXP_DESC(AXP192, LDO3, "ldo3", "ldoin", 1800, 3300, 100,
> + AXP192_LDO2_3_V_OUT, AXP192_LDO3_V_OUT_MASK,
> + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO3_MASK),
> + AXP_DESC_IO(AXP192, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
> + AXP192_LDO_IO0_V_OUT, AXP192_LDO_IO0_V_OUT_MASK,
> + AXP192_GPIO0_CTRL, AXP192_GPIO0_FUNC_MASK,
> + AXP192_IO_ENABLED, AXP192_IO_DISABLED),
> +};
> +
> static const struct linear_range axp20x_ldo4_ranges[] = {
> REGULATOR_LINEAR_RANGE(1250000,
> AXP20X_LDO4_V_OUT_1250mV_START,
> @@ -1008,6 +1062,12 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> u32 min, max, def, step;
>
> switch (axp20x->variant) {
> + case AXP192_ID:
> + min = 900;
> + max = 2025;
> + def = 1500;
> + step = 75;
> + break;
> case AXP202_ID:
> case AXP209_ID:
> min = 750;
> @@ -1100,6 +1160,24 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
> unsigned int mask;
>
> switch (axp20x->variant) {
> + case AXP192_ID:
> + switch (id) {
> + case AXP192_DCDC1:
> + mask = AXP192_WORKMODE_DCDC1_MASK;
> + break;
> + case AXP192_DCDC2:
> + mask = AXP192_WORKMODE_DCDC2_MASK;
> + break;
> + case AXP192_DCDC3:
> + mask = AXP192_WORKMODE_DCDC3_MASK;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + workmode <<= ffs(mask) - 1;
> + break;
> +
> case AXP202_ID:
> case AXP209_ID:
> if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
> @@ -1220,6 +1298,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> bool drivevbus = false;
>
> switch (axp20x->variant) {
> + case AXP192_ID:
> + regulators = axp192_regulators;
> + nregulators = AXP192_REG_ID_MAX;
> + break;
> case AXP202_ID:
> case AXP209_ID:
> regulators = axp20x_regulators;
> --
> 2.35.1
>


--
With Best Regards,
Andy Shevchenko