Re: [PATCH v4 08/15] iio: adc: axp20x_adc: Minor code cleanups

From: Andy Shevchenko
Date: Thu Jun 30 2022 - 03:59:24 EST

On Wed, Jun 29, 2022 at 4:30 PM Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
> The code may be clearer if parameters are not re-purposed to hold
> temporary results like register values, so introduce local variables
> as necessary to avoid that. Regroup macros based on chip type, and
> use the FIELD_PREP() macro instead of a hand-rolled version.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> ---
> drivers/iio/adc/axp20x_adc.c | 61 +++++++++++++++++++-----------------
> 1 file changed, 32 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index 53bf7d4899d2..ab25e6e1ff65 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -5,6 +5,7 @@
> * Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/completion.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> @@ -22,20 +23,20 @@
> #include <linux/mfd/axp20x.h>
>
> #define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
> -
> #define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))
> +
> #define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0))
>
> #define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0)
> #define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1)
> -#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
> -#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
>
> #define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
> -#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
> -#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
> #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
> +
> #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> +
> +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
> +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
> #define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x)
> #define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
> #define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
> @@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val)
> {
> struct axp20x_adc_iio *info = iio_priv(indio_dev);
> - int size = 12;
> + int ret, size;
>
> /*
> * N.B.: Unlike the Chinese datasheets tell, the charging current is
> @@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
> else
> size = 12;
>
> - *val = axp20x_read_variable_width(info->regmap, chan->address, size);
> - if (*val < 0)
> - return *val;
> + ret = axp20x_read_variable_width(info->regmap, chan->address, size);
> + if (ret < 0)
> + return ret;
>
> + *val = ret;
> return IIO_VAL_INT;
> }
>
> @@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val)
> {
> struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + int ret;
>
> - *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> - if (*val < 0)
> - return *val;
> + ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
> + if (ret < 0)
> + return ret;
>
> + *val = ret;
> return IIO_VAL_INT;
> }
>
> @@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val)
> {
> struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + int ret;
>
> - *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> - if (*val < 0)
> - return *val;
> + ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
> + if (ret < 0)
> + return ret;
>
> + *val = ret;
> return IIO_VAL_INT;
> }
>
> @@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
> int *val)
> {
> struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + unsigned int regval;
> int ret;
>
> - ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
> + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
> if (ret < 0)
> return ret;
>
> switch (channel) {
> case AXP20X_GPIO0_V:
> - *val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
> + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
> break;
>
> case AXP20X_GPIO1_V:
> - *val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
> + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
> break;
>
> default:
> return -EINVAL;
> }
>
> - *val = *val ? 700000 : 0;
> -
> + *val = regval ? 700000 : 0;
> return IIO_VAL_INT;
> }
>
> @@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
> long mask)
> {
> struct axp20x_adc_iio *info = iio_priv(indio_dev);
> - unsigned int reg, regval;
> + unsigned int regmask, regval;
>
> /*
> * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
> @@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
> if (val != 0 && val != 700000)
> return -EINVAL;
>
> - val = val ? 1 : 0;
> -
> switch (chan->channel) {
> case AXP20X_GPIO0_V:
> - reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
> - regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
> + regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
> + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val);
> break;
>
> case AXP20X_GPIO1_V:
> - reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
> - regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
> + regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
> + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val);
> break;
>
> default:
> return -EINVAL;
> }
>
> - return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
> - regval);
> + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
> }
>
> static const struct iio_info axp20x_adc_iio_info = {
> --
> 2.35.1
>


--
With Best Regards,
Andy Shevchenko