[PATCH v3 06/13] regulator: qcom_spmi: Add support for HFSMPS regulator type

[Iskren Chernev]

This is preparation for supporing PM6125.

The HFSMPS is a BUCK type regulator with subtype 0x0a, same as the
existing HFS430 regulator.

Even though the HFSMPS and HFS430 share a register layout, the HFSMPS has
different mode values (BYPASS, RETENTION and LPM are one lower).

I'm expecting future regulators (higher revision) with the same type and
subtype to share mode values of HFSMPS, so revisions 4 (found on pm6125)
and up use the new ops.

The inspiration of this is taken from [1].

[1] https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
---
 drivers/regulator/qcom_spmi-regulator.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 50c8ee01e0ad..19af294a6972 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -101,6 +101,7 @@ enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3,
 	SPMI_REGULATOR_LOGICAL_TYPE_LDO_510,
+	SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS,
 };
 
 enum spmi_regulator_type {
@@ -168,6 +169,7 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
+	SPMI_REGULATOR_SUBTYPE_HFSMPS_510	= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_FTSMPS_510	= 0x0b,
 	SPMI_REGULATOR_SUBTYPE_LV_P150_510	= 0x71,
 	SPMI_REGULATOR_SUBTYPE_LV_P300_510	= 0x72,
@@ -1567,6 +1569,19 @@ static const struct regulator_ops spmi_ftsmps3_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 };
 
+static const struct regulator_ops spmi_hfsmps_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= spmi_regulator_ftsmps426_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_ftsmps426_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_ftsmps3_set_mode,
+	.get_mode		= spmi_regulator_ftsmps3_get_mode,
+};
+
 /* Maximum possible digital major revision value */
 #define INF 0xFF
 
@@ -1575,7 +1590,8 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(LDO,   HT_P600,  0, INF, HFS430, hfs430, ht_p600, 10000),
 	SPMI_VREG(LDO,   HT_P150,  0, INF, HFS430, hfs430, ht_p150, 10000),
 	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
-	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFS430,   0,   3, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFSMPS_510, 4, INF, HFSMPS, hfsmps, hfs430, 100000),
 	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
 	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
 	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
-- 
2.37.1