Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property

[Russell King (Oracle)]

On Fri, Aug 12, 2022 at 03:04:41PM +0300, Krzysztof Kozlowski wrote:
> I did not propose a property to enable hibernation. The property must
> describe hardware, so this piece is missing, regardless whether the
> logic in the driver is "enable" or "disable".
> 
> The hardware property for example is: "broken foo, so hibernation should
> be disabled" or "engineer forgot to wire cables, so hibernation won't
> work"...

>From the problem description, the PHY itself isn't broken. The stmmac
hardware doesn't reset properly when the clock from the PHY is stopped.
That could hardly be described as "broken" - it's quite common for
hardware specifications to state that clocks must be running for the
hardware to operate correctly.

This is a matter of configuring the hardware to inter-operate correctly.
Isn't that the whole purpose of DT?

So, nothing is broken. Nothing has forgotten to be wired. It's a matter
of properly configuring the hardware. Just the same as selecting the
correct interface mode to connect two devices together.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!