[PATCH v8 3/4] dt-bindings: irqchip: imx mu work as msi controller

From: Frank Li
Date: Tue Sep 06 2022 - 15:41:45 EST


I.MX mu support generate irq by write a register. Provide msi controller
support so other driver such as PCI EP can use it by standard msi
interface as doorbell.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
.../interrupt-controller/fsl,mu-msi.yaml | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 0000000000000..5466bd19b703c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+ - Frank Li <Frank.Li@xxxxxxx>
+
+description: |
+ The Messaging Unit module enables two processors within the SoC to
+ communicate and coordinate by passing messages (e.g. data, status
+ and control) through the MU interface. The MU also provides the ability
+ for one processor (A side) to signal the other processor (B side) using
+ interrupts.
+
+ Because the MU manages the messaging between processors, the MU uses
+ different clocks (from each side of the different peripheral buses).
+ Therefore, the MU must synchronize the accesses from one side to the
+ other. The MU accomplishes synchronization using two sets of matching
+ registers (Processor A-facing, Processor B-facing).
+
+ MU can work as msi interrupt controller to do doorbell
+
+allOf:
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-mu-msi
+ - fsl,imx7ulp-mu-msi
+ - fsl,imx8ulp-mu-msi
+ - fsl,imx8ulp-mu-msi-s4
+
+ reg:
+ items:
+ - description: a side register base address
+ - description: b side register base address
+
+ reg-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupts:
+ description: a side interrupt number.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: a side power domain
+ - description: b side power domain
+
+ power-domain-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupt-controller: true
+
+ msi-controller: true
+
+ "#msi-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - msi-controller
+ - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ msi-controller@5d270000 {
+ compatible = "fsl,imx6sx-mu-msi";
+ msi-controller;
+ #msi-cells = <0>;
+ interrupt-controller;
+ reg = <0x5d270000 0x10000>, /* A side */
+ <0x5d300000 0x10000>; /* B side */
+ reg-names = "processor a-facing", "processor b-facing";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MU_12A>,
+ <&pd IMX_SC_R_MU_12B>;
+ power-domain-names = "processor a-facing", "processor b-facing";
+ };
--
2.35.1