Re: [PATCH v8 3/4] dt-bindings: irqchip: imx mu work as msi controller

From: Rob Herring
Date: Tue Sep 06 2022 - 17:41:22 EST


On Tue, 06 Sep 2022 14:40:51 -0500, Frank Li wrote:
> I.MX mu support generate irq by write a register. Provide msi controller
> support so other driver such as PCI EP can use it by standard msi
> interface as doorbell.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> .../interrupt-controller/fsl,mu-msi.yaml | 99 +++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.example.dtb: msi-controller@5d270000: reg-names:0: 'processor-a-side' was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.example.dtb: msi-controller@5d270000: reg-names:1: 'processor-b-side' was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.example.dtb: msi-controller@5d270000: power-domain-names:0: 'processor-a-side' was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.example.dtb: msi-controller@5d270000: power-domain-names:1: 'processor-b-side' was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.