[PATCH] net/ncsi: Add Intel OS2BMC OEM command

From: Jiaqing Zhao
Date: Thu Sep 08 2022 - 22:58:06 EST


The Intel OS2BMC OEM NCSI command is used for controlling whether
network traffic between host and sideband is allowed or not. By
default such traffic is disallowed, meaning that if the device using
NCS (usually BMC) does not have extra active connection, it cannot
reach the host.

This patch enables the host-sideband traffic by sending the Enable
OS2BMC flow OEM NCSI command, which is controlled by kernel option
CONFIG_NCSI_OEM_CMD_INTEL_OS2BMC.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
---
net/ncsi/Kconfig | 6 ++++++
net/ncsi/internal.h | 4 ++++
net/ncsi/ncsi-manage.c | 42 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 52 insertions(+)

diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig
index ea1dd32b6b1f..faeddbd48fe9 100644
--- a/net/ncsi/Kconfig
+++ b/net/ncsi/Kconfig
@@ -23,3 +23,9 @@ config NCSI_OEM_CMD_KEEP_PHY
help
This allows to keep PHY link up and prevents any channel resets during
the host load.
+config NCSI_OEM_CMD_INTEL_OS2BMC
+ bool "Allow traffic between host and sideband (Intel-specific)"
+ depends on NET_NCSI
+ help
+ This allows network traffic between host and sideband, specific to
+ Intel network controllers.
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 03757e76bb6b..d730f435d136 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -82,6 +82,8 @@ enum {
/* Intel specific OEM command */
#define NCSI_OEM_INTEL_CMD_GMA 0x06 /* CMD ID for Get MAC */
#define NCSI_OEM_INTEL_CMD_KEEP_PHY 0x20 /* CMD ID for Keep PHY up */
+#define NCSI_OEM_INTEL_CMD_OS2BMC 0x40 /* CMD ID for Enable OS2BMC traffic */
+#define NCSI_OEM_INTEL_CMD_OS2BMC_PARAM 0x03 /* Parameter for Enable OS2BMC */
/* Broadcom specific OEM Command */
#define NCSI_OEM_BCM_CMD_GMA 0x01 /* CMD ID for Get MAC */
/* Mellanox specific OEM Command */
@@ -92,6 +94,7 @@ enum {
/* OEM Command payload lengths*/
#define NCSI_OEM_INTEL_CMD_GMA_LEN 5
#define NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN 7
+#define NCSI_OEM_INTEL_CMD_OS2BMC_LEN 6
#define NCSI_OEM_BCM_CMD_GMA_LEN 12
#define NCSI_OEM_MLX_CMD_GMA_LEN 8
#define NCSI_OEM_MLX_CMD_SMAF_LEN 60
@@ -285,6 +288,7 @@ enum {
ncsi_dev_state_probe_dp,
ncsi_dev_state_config_sp = 0x0301,
ncsi_dev_state_config_cis,
+ ncsi_dev_state_config_intel_os2bmc,
ncsi_dev_state_config_oem_gma,
ncsi_dev_state_config_clear_vids,
ncsi_dev_state_config_svf,
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 80713febfac6..d8b9fcedf7ec 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -718,6 +718,34 @@ static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca)

#endif

+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_INTEL_OS2BMC)
+
+static int ncsi_oem_enable_os2bmc_intel(struct ncsi_cmd_arg *nca)
+{
+ unsigned char data[NCSI_OEM_INTEL_CMD_OS2BMC_LEN];
+ int ret = 0;
+
+ nca->payload = NCSI_OEM_INTEL_CMD_OS2BMC_LEN;
+
+ memset(data, 0, NCSI_OEM_INTEL_CMD_OS2BMC_LEN);
+ *(unsigned int *)data = ntohl((__force __be32)NCSI_OEM_MFR_INTEL_ID);
+ data[4] = NCSI_OEM_INTEL_CMD_OS2BMC;
+
+ /* Enable both Network-to-BMC and Host-to-BMC traffic */
+ data[5] = NCSI_OEM_INTEL_CMD_OS2BMC_PARAM;
+
+ nca->data = data;
+
+ ret = ncsi_xmit_cmd(nca);
+ if (ret)
+ netdev_err(nca->ndp->ndev.dev,
+ "NCSI: Failed to transmit cmd 0x%x during configure\n",
+ nca->type);
+ return ret;
+}
+
+#endif
+
#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)

/* NCSI OEM Command APIs */
@@ -1039,6 +1067,20 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
goto error;
}

+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_INTEL_OS2BMC)
+ nd->state = ncsi_dev_state_config_intel_os2bmc;
+ break;
+ case ncsi_dev_state_config_intel_os2bmc:
+ nca.type = NCSI_PKT_CMD_OEM;
+ nca.package = np->id;
+ nca.channel = nc->id;
+ ndp->pending_req_num = 1;
+ ret = ncsi_oem_enable_os2bmc_intel(&nca);
+
+ if (ret)
+ goto error;
+#endif /* CONFIG_NCSI_OEM_CMD_INTEL_OS2BMC */
+
nd->state = ncsi_dev_state_config_oem_gma;
break;
case ncsi_dev_state_config_oem_gma:
--
2.34.1