[PATCH] arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon

[Macpaul Lin]

The size of device tree node secmon (bl31_secmon_reserved) was
incorrect. It should be increased to 2MiB (0x200000).

The origin setting will cause some abnormal behavior due to
trusted-firmware-a and related firmware didn't load correctly.
The incorrect behavior may vary because of different software stacks.
For example, it will cause build error in some Yocto project because
it will check if there was enough memory to load trusted-firmware-a
to the reserved memory.

Cc: stable@xxxxxxxxxxxxxxx      # v5.19
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 4fbd99eb496a..dec85d254838 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -56,10 +56,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@54600000 {
 			no-map;
-			reg = <0 0x54600000 0x0 0x30000>;
+			reg = <0 0x54600000 0x0 0x200000>;
 		};
 
 		/* 12 MiB reserved for OP-TEE (BL32)
-- 
2.18.0