Re: [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support

From: Emil Renner Berthing
Date: Wed Oct 05 2022 - 09:06:19 EST

On Thu, 29 Sept 2022 at 16:34, Hal Feng <hal.feng@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> This series adds basic support for the StarFive JH7110 RISC-V SoC to
> boot up and get a serial console. This series includes basic clock,
> reset, pinctrl and uart drivers, which are necessary for booting.
> It's should be noted that the reset and clock driver codes of JH7110
> are partly common with those of JH7100, so the common codes are
> factored out and can be reused by drivers of JH7110 and other more
> SoCs from StarFive.
>
> The JH7110 is the upgraded version of JH7100 and also the first official
> released version of JH71XX series SoCs from StarFive Technology Ltd.
> The VisionFive 2 boards equipped with JH7110 SoCs are launched
> recently [1]. More information and support can visit RVspace wiki [2].
>
> This series is also available at
> https://github.com/hal-feng/linux/commits/visionfive2-minimal
>
> [1] https://www.cnx-software.com/2022/08/23/starfive-visionfive-2-quad-core-risc-v-sbc-linux/
> [2] https://wiki.rvspace.org/

Hi Hal,

Firstly thanks for working on this! And sorry about the late reply. On
the next version could you please cc
emil.renner.berthing@xxxxxxxxxxxxx since it seems to handle the
mailing list a bit better.

I see you've changed the clock/reset and pinctrl quite a bit, so I'll
comment on that separately.

/Emil

> Emil Renner Berthing (17):
> dt-bindings: riscv: Add StarFive JH7110 bindings
> dt-bindings: timer: Add StarFive JH7110 clint
> dt-bindings: interrupt-controller: Add StarFive JH7110 plic
> dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs
> soc: sifive: l2 cache: Convert to platform driver
> soc: sifive: l2 cache: Add StarFive JH71x0 support
> reset: starfive: jh7100: Use 32bit I/O on 32bit registers
> dt-bindings: reset: Add StarFive JH7110 reset definitions
> clk: starfive: Factor out common clock driver code
> dt-bindings: clock: Add StarFive JH7110 system clock definitions
> dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings
> clk: starfive: Add StarFive JH7110 system clock driver
> dt-bindings: clock: Add StarFive JH7110 always-on definitions
> dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings
> clk: starfive: Add StarFive JH7110 always-on clock driver
> RISC-V: Add initial StarFive JH7110 device tree
> RISC-V: Add StarFive JH7110 VisionFive2 board device tree
>
> Hal Feng (8):
> reset: starfive: jh7100: Use regmap APIs to operate registers
> reset: starfive: jh7100: Move necessary properties to device tree
> reset: starfive: Rename 'reset-starfive-jh7100.c' to
> 'reset-starfive.c'
> dt-bindings: reset: Add starfive,jh7110-reset bindings
> reset: starfive: Add StarFive JH7110 SoC support
> clk: starfive: Use regmap APIs to operate registers
> RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW
> RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options
>
> Jianlong Huang (5):
> pinctrl: Create subdirectory for StarFive drivers
> pinctrl: starfive: Rename "pinctrl-starfive" to
> "pinctrl-starfive-jh7100"
> dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
> dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings
> pinctrl: starfive: Add StarFive JH7110 driver
>
> .../clock/starfive,jh7110-clkgen-aon.yaml | 62 ++
> .../clock/starfive,jh7110-clkgen-sys.yaml | 69 ++
> .../sifive,plic-1.0.0.yaml | 1 +
> .../pinctrl/starfive,jh7100-pinctrl.yaml | 2 +-
> .../pinctrl/starfive,jh7110-pinctrl.yaml | 202 ++++
> .../bindings/reset/starfive,jh7100-reset.yaml | 20 +
> .../bindings/reset/starfive,jh7110-reset.yaml | 54 +
> .../bindings/riscv/sifive-l2-cache.yaml | 4 +
> .../devicetree/bindings/riscv/starfive.yaml | 3 +
> .../bindings/timer/sifive,clint.yaml | 1 +
> MAINTAINERS | 27 +-
> arch/riscv/Kconfig.socs | 28 +-
> arch/riscv/boot/dts/starfive/Makefile | 3 +-
> .../dts/starfive/jh7100-beaglev-starlight.dts | 2 +-
> arch/riscv/boot/dts/starfive/jh7100.dtsi | 3 +
> .../jh7110-starfive-visionfive-v2.dts | 91 ++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++
> arch/riscv/configs/defconfig | 1 +
> drivers/clk/starfive/Kconfig | 29 +-
> drivers/clk/starfive/Makefile | 6 +-
> .../clk/starfive/clk-starfive-jh7100-audio.c | 138 +--
> drivers/clk/starfive/clk-starfive-jh7100.c | 836 +++++-----------
> drivers/clk/starfive/clk-starfive-jh7100.h | 112 ---
> .../clk/starfive/clk-starfive-jh7110-aon.c | 161 +++
> .../clk/starfive/clk-starfive-jh7110-sys.c | 648 ++++++++++++
> drivers/clk/starfive/clk-starfive.c | 349 +++++++
> drivers/clk/starfive/clk-starfive.h | 112 +++
> drivers/pinctrl/Kconfig | 18 +-
> drivers/pinctrl/Makefile | 2 +-
> drivers/pinctrl/starfive/Kconfig | 37 +
> drivers/pinctrl/starfive/Makefile | 8 +
> drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 718 ++++++++++++++
> drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 925 +++++++++++++++++
> .../pinctrl-starfive-jh7100.c} | 10 +-
> drivers/pinctrl/starfive/pinctrl-starfive.c | 539 ++++++++++
> drivers/pinctrl/starfive/pinctrl-starfive.h | 131 +++
> drivers/reset/Kconfig | 7 +-
> drivers/reset/Makefile | 2 +-
> drivers/reset/reset-starfive-jh7100.c | 173 ----
> drivers/reset/reset-starfive.c | 218 ++++
> drivers/soc/Makefile | 2 +-
> drivers/soc/sifive/Kconfig | 2 +-
> drivers/soc/sifive/sifive_l2_cache.c | 86 +-
> .../dt-bindings/clock/starfive-jh7110-aon.h | 26 +
> .../dt-bindings/clock/starfive-jh7110-sys.h | 215 ++++
> ...l-starfive.h => pinctrl-starfive-jh7100.h} | 6 +-
> .../pinctrl/pinctrl-starfive-jh7110.h | 931 ++++++++++++++++++
> include/dt-bindings/reset/starfive-jh7110.h | 154 +++
> 48 files changed, 6604 insertions(+), 1019 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-sys.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7110-reset.yaml
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
> delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
> create mode 100644 drivers/clk/starfive/clk-starfive.c
> create mode 100644 drivers/clk/starfive/clk-starfive.h
> create mode 100644 drivers/pinctrl/starfive/Kconfig
> create mode 100644 drivers/pinctrl/starfive/Makefile
> create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
> rename drivers/pinctrl/{pinctrl-starfive.c => starfive/pinctrl-starfive-jh7100.c} (99%)
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
> delete mode 100644 drivers/reset/reset-starfive-jh7100.c
> create mode 100644 drivers/reset/reset-starfive.c
> create mode 100644 include/dt-bindings/clock/starfive-jh7110-aon.h
> create mode 100644 include/dt-bindings/clock/starfive-jh7110-sys.h
> rename include/dt-bindings/pinctrl/{pinctrl-starfive.h => pinctrl-starfive-jh7100.h} (98%)
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
> create mode 100644 include/dt-bindings/reset/starfive-jh7110.h
>
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv