Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings

[Krzysztof Kozlowski]

On 26/10/2022 15:04, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.

Just "Add Devicetree bindings for QDU1000 and QRU1000 TLMM devices."

Subject - drop redundant second bindings.

> 
> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,qdu1000-tlmm.yaml   | 135 ++++++++++++++++++
>  1 file changed, 135 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
> new file mode 100644
> index 000000000000..a2ca4d59e2e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
> +
> +maintainers:
> +  - Melody Olvera <quic_molvera@xxxxxxxxxxx>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block (TLMM) found

Drop "This binding describes"

IOW, just take a peak at current bindings in next.


> +  in the QDU1000 and QRU1000 platforms.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:

No items.

> +      - const: qcom,qdu1000-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +
> +  gpio-reserved-ranges:
> +    minItems: 1
> +    maxItems: 75
> +
> +  gpio-line-names:
> +    maxItems: 151
> +
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-qdu1000-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"

This is not fixed.

> +            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
Best regards,
Krzysztof