[PATCH v4 02/23] phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions

From: Manivannan Sadhasivam
Date: Thu Dec 01 2022 - 12:44:12 EST


Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead
of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's
rename all of the definitions to use "_ufsphy_".

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 20fcdbef8c77..35b77cd79e57 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -94,7 +94,7 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
};

-static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
@@ -143,12 +143,12 @@ static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
};

-static const struct qmp_phy_init_tbl msm8996_ufs_tx[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_tx[] = {
QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
};

-static const struct qmp_phy_init_tbl msm8996_ufs_rx[] = {
+static const struct qmp_phy_init_tbl msm8996_ufsphy_rx[] = {
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
@@ -629,15 +629,15 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v5 = {
.rx2 = 0xa00,
};

-static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
.lanes = 1,

- .serdes_tbl = msm8996_ufs_serdes,
- .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes),
- .tx_tbl = msm8996_ufs_tx,
- .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx),
- .rx_tbl = msm8996_ufs_rx,
- .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx),
+ .serdes_tbl = msm8996_ufsphy_serdes,
+ .serdes_tbl_num = ARRAY_SIZE(msm8996_ufsphy_serdes),
+ .tx_tbl = msm8996_ufsphy_tx,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_ufsphy_tx),
+ .rx_tbl = msm8996_ufsphy_rx,
+ .rx_tbl_num = ARRAY_SIZE(msm8996_ufsphy_rx),

.clk_list = msm8996_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l),
@@ -1156,7 +1156,7 @@ static int qmp_ufs_probe(struct platform_device *pdev)
static const struct of_device_id qmp_ufs_of_match_table[] = {
{
.compatible = "qcom,msm8996-qmp-ufs-phy",
- .data = &msm8996_ufs_cfg,
+ .data = &msm8996_ufsphy_cfg,
}, {
.compatible = "qcom,msm8998-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,
--
2.25.1