Re: [PATCH v4 02/23] phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions

[Dmitry Baryshkov]

On 1 December 2022 20:43:07 GMT+03:00, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead
>of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's
>rename all of the definitions to use "_ufsphy_".
>
>Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
>diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>index 20fcdbef8c77..35b77cd79e57 100644
>--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
>@@ -94,7 +94,7 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> 	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
> };
> 
>-static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
>+static const struct qmp_phy_init_tbl msm8996_ufsphy_serdes[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
> 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
>@@ -143,12 +143,12 @@ static const struct qmp_phy_init_tbl msm8996_ufs_serdes[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
> };
> 
>-static const struct qmp_phy_init_tbl msm8996_ufs_tx[] = {
>+static const struct qmp_phy_init_tbl msm8996_ufsphy_tx[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> 	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
> };
> 
>-static const struct qmp_phy_init_tbl msm8996_ufs_rx[] = {
>+static const struct qmp_phy_init_tbl msm8996_ufsphy_rx[] = {
> 	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
> 	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
> 	QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
>@@ -629,15 +629,15 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v5 = {
> 	.rx2		= 0xa00,
> };
> 
>-static const struct qmp_phy_cfg msm8996_ufs_cfg = {
>+static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
> 	.lanes			= 1,
> 
>-	.serdes_tbl		= msm8996_ufs_serdes,
>-	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes),
>-	.tx_tbl			= msm8996_ufs_tx,
>-	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufs_tx),
>-	.rx_tbl			= msm8996_ufs_rx,
>-	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufs_rx),
>+	.serdes_tbl		= msm8996_ufsphy_serdes,
>+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_serdes),
>+	.tx_tbl			= msm8996_ufsphy_tx,
>+	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_tx),
>+	.rx_tbl			= msm8996_ufsphy_rx,
>+	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufsphy_rx),
> 
> 	.clk_list		= msm8996_ufs_phy_clk_l,
> 	.num_clks		= ARRAY_SIZE(msm8996_ufs_phy_clk_l),
>@@ -1156,7 +1156,7 @@ static int qmp_ufs_probe(struct platform_device *pdev)
> static const struct of_device_id qmp_ufs_of_match_table[] = {
> 	{
> 		.compatible = "qcom,msm8996-qmp-ufs-phy",
>-		.data = &msm8996_ufs_cfg,
>+		.data = &msm8996_ufsphy_cfg,
> 	}, {
> 		.compatible = "qcom,msm8998-qmp-ufs-phy",
> 		.data = &sdm845_ufsphy_cfg,

-- 
With best wishes
Dmitry