Re: [PATCH 02/15] can: m_can: Wakeup net queue once tx was issued
From: Marc Kleine-Budde
Date: Fri Dec 02 2022 - 04:33:54 EST
On 01.12.2022 17:49:02, Markus Schneider-Pargmann wrote:
> Hi Marc,
>
> On Thu, Dec 01, 2022 at 10:16:05AM +0100, Marc Kleine-Budde wrote:
> > On 01.12.2022 09:43:02, Markus Schneider-Pargmann wrote:
> > > Hi Marc,
> > >
> > > On Wed, Nov 30, 2022 at 06:21:00PM +0100, Marc Kleine-Budde wrote:
> > > > On 16.11.2022 21:52:55, Markus Schneider-Pargmann wrote:
> > > > > Currently the driver waits to wakeup the queue until the interrupt for
> > > > > the transmit event is received and acknowledged. If we want to use the
> > > > > hardware FIFO, this is too late.
> > > > >
> > > > > Instead release the queue as soon as the transmit was transferred into
> > > > > the hardware FIFO. We are then ready for the next transmit to be
> > > > > transferred.
> > > >
> > > > If you want to really speed up the TX path, remove the worker and use
> > > > the spi_async() API from the xmit callback, see mcp251xfd_start_xmit().
> > >
> > > Good idea. I will check how regmap's async_write works and if it is
> > > suitable to do the job. I don't want to drop the regmap usage for this
> > > right now.
> >
> > IIRC regmap async write still uses mutexes, but sleeping is not allowed
> > in the xmit handler. The mcp251xfd driver does the endianness conversion
> > (and the optional CRC) manually for the TX path.
>
> I just saw, you can force regmap to use spinlocks as well. But it uses
> the same operation for sync operations as well.
But you cannot use sync SPI api under a spinlock.
> > Sending directly from the xmit handler basically eliminates the queuing
> > between the network stack and the worker. Getting rid of the worker
> > makes life easier and it's faster anyways.
>
> The current implementation of the driver doesn't really queue anything
> between the network stack and the worker. It is a queue of size 1 ;).
Ok
> To be honest I would rather focus on the other things than on getting
> rid of the worker completely as this can be done in a separate patch
> later as well. Yes I agree it would be nice to get rid of the worker but
> it is also probably not a major bottleneck for the performance and in
> its current state it works. If I have time left at the end I will be
> more than happy to do that. But for the moment I would just keep the
> worker as it is. Is that OK for you?
Sure.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature