Re: [PATCH v2 2/6] dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
From: Krzysztof Kozlowski
Date: Fri Dec 02 2022 - 12:00:29 EST
On 02/12/2022 17:54, Icenowy Zheng wrote:
> 在 2022-12-02星期五的 10:02 +0100,Krzysztof Kozlowski写道:
>> On 02/12/2022 09:16, Icenowy Zheng wrote:
>>> The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that
>>> features 4 downstream ports, an internal 5V-to-3.3V LDO regulator
>>> (can
>>> be bypassed) and an external reset pin.
>>>
>>> Add a device tree binding for its USB protocol part. The internal
>>> LDO is
>>> not covered by this and can just be modelled as a fixed regulator.
>>>
>>> Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx>
>>> ---
>>> Changes in v2:
>>> - Misc fixes suggested by Krzysztof, including property
>>> descriptions,
>>> single-item "items" and fixing the example's gpio property.
>>> - Fixed $id.
>>>
>> (...)
>>
>>> +
>>> +examples:
>>> + - |
>>> + usb {
>>> + dr_mode = "host";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + hub: hub@1 {
>>> + compatible = "usb5e3,608";
>>> + reg = <1>;
>>> + reset-gpios = <&pio 7 2>;
>>
>> Use GPIO flags. What did you fix in the example?
>
> It used to be here, but using it needs another include, which I don't
> think it necessary here.
The header is necessary for the flags...
>
> Maybe I should just drop this line in the example?
It's useful. The example should be rather complete, not just compatible
and reg.
Different problem - you miss maxItems for the GPIOs.
Best regards,
Krzysztof