[PATCH 2/2] dt-bindings: display/panel: Add the focaltech gpt3

[Christophe Branchereau]

Add bindings for the focaltech gpt3, which is a 640x480 3.0" 4:3
IPS LCD Panel found in the YLM/Anbernic RG300X handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
---
 .../display/panel/focaltech,gpt3.yaml         | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 000000000000..969f117c51ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
-- 
2.35.1